HTML

Living Standard — Last Updated 12 December 2024

1. 1. 4.10 Forms
      1. 4.10.1 Introduction
         1. 4.10.1.1 Writing a form's user interface
         2. 4.10.1.2 Implementing the server-side processing for a form
         3. 4.10.1.3 Configuring a form to communicate with a server
         4. 4.10.1.4 Client-side form validation
         5. 4.10.1.5 Enabling client-side automatic filling of form controls
         6. 4.10.1.6 Improving the user experience on mobile devices
         7. 4.10.1.7 The difference between the field type, the autofill field name, and the input modality
         8. 4.10.1.8 Date, time, and number formats
      2. 4.10.2 Categories
      3. 4.10.3 The form element
      4. 4.10.4 The label element

4.10 Forms

4.10.1 Introduction

This section is non-normative.

A form is a component of a web page that has form controls, such as text, buttons, checkboxes, range, or color picker controls. A user can interact with such a form, providing data that can then be sent to the server for further processing (e.g. returning the results of a search or calculation). No client-side scripting is needed in many cases, though an API is available so that scripts can augment the user experience or use forms for purposes other than submitting data to a server.

Writing a form consists of several steps, which can be performed in any order: writing the user interface, implementing the server-side processing, and configuring the user interface to communicate with the server.

4.10.1.1 Writing a form's user interface

This section is non-normative.

For the purposes of this brief introduction, we will create a pizza ordering form.

Any form starts with a form element, inside which are placed the controls. Most controls are represented by the input element, which by default provides a text control. To label a control, the label element is used; the label text and the control itself go inside the label element. Each part of a form is considered a paragraph, and is typically separated from other parts using p elements. Putting this together, here is how one might ask for the customer's name:

<form>
 <p><label>Customer name: <input></label></p>
</form>

To let the user select the size of the pizza, we can use a set of radio buttons. Radio buttons also use the input element, this time with a type attribute with the value radio. To make the radio buttons work as a group, they are given a common name using the name attribute. To group a batch of controls together, such as, in this case, the radio buttons, one can use the fieldset element. The title of such a group of controls is given by the first element in the fieldset, which has to be a legend element.

<form>
 <p><label>Customer name: <input></label></p>
 <fieldset>
  <legend> Pizza Size </legend>
  <p><label> <input type=radio name=size> Small </label></p>
  <p><label> <input type=radio name=size> Medium </label></p>
  <p><label> <input type=radio name=size> Large </label></p>
 </fieldset>
</form>

Changes from the previous step are highlighted.

To pick toppings, we can use checkboxes. These use the input element with a type attribute with the value checkbox:

<form>
 <p><label>Customer name: <input></label></p>
 <fieldset>
  <legend> Pizza Size </legend>
  <p><label> <input type=radio name=size> Small </label></p>
  <p><label> <input type=radio name=size> Medium </label></p>
  <p><label> <input type=radio name=size> Large </label></p>
 </fieldset>
 <fieldset>
  <legend> Pizza Toppings </legend>
  <p><label> <input type=checkbox> Bacon </label></p>
  <p><label> <input type=checkbox> Extra Cheese </label></p>
  <p><label> <input type=checkbox> Onion </label></p>
  <p><label> <input type=checkbox> Mushroom </label></p>
 </fieldset>
</form>

The pizzeria for which this form is being written is always making mistakes, so it needs a way to contact the customer. For this purpose, we can use form controls specifically for telephone numbers (input elements with their type attribute set to tel) and email addresses (input elements with their type attribute set to email):

<form>
 <p><label>Customer name: <input></label></p>
 <p><label>Telephone: <input type=tel></label></p>
 <p><label>Email address: <input type=email></label></p>
 <fieldset>
  <legend> Pizza Size </legend>
  <p><label> <input type=radio name=size> Small </label></p>
  <p><label> <input type=radio name=size> Medium </label></p>
  <p><label> <input type=radio name=size> Large </label></p>
 </fieldset>
 <fieldset>
  <legend> Pizza Toppings </legend>
  <p><label> <input type=checkbox> Bacon </label></p>
  <p><label> <input type=checkbox> Extra Cheese </label></p>
  <p><label> <input type=checkbox> Onion </label></p>
  <p><label> <input type=checkbox> Mushroom </label></p>
 </fieldset>
</form>

We can use an input element with its type attribute set to time to ask for a delivery time. Many of these form controls have attributes to control exactly what values can be specified; in this case, three attributes of particular interest are min, max, and step. These set the minimum time, the maximum time, and the interval between allowed values (in seconds). This pizzeria only delivers between 11am and 9pm, and doesn't promise anything better than 15 minute increments, which we can mark up as follows:

<form>
 <p><label>Customer name: <input></label></p>
 <p><label>Telephone: <input type=tel></label></p>
 <p><label>Email address: <input type=email></label></p>
 <fieldset>
  <legend> Pizza Size </legend>
  <p><label> <input type=radio name=size> Small </label></p>
  <p><label> <input type=radio name=size> Medium </label></p>
  <p><label> <input type=radio name=size> Large </label></p>
 </fieldset>
 <fieldset>
  <legend> Pizza Toppings </legend>
  <p><label> <input type=checkbox> Bacon </label></p>
  <p><label> <input type=checkbox> Extra Cheese </label></p>
  <p><label> <input type=checkbox> Onion </label></p>
  <p><label> <input type=checkbox> Mushroom </label></p>
 </fieldset>
 <p><label>Preferred delivery time: <input type=time min="11:00" max="21:00" step="900"></label></p>
</form>

The textarea element can be used to provide a multiline text control. In this instance, we are going to use it to provide a space for the customer to give delivery instructions:

<form>
 <p><label>Customer name: <input></label></p>
 <p><label>Telephone: <input type=tel></label></p>
 <p><label>Email address: <input type=email></label></p>
 <fieldset>
  <legend> Pizza Size </legend>
  <p><label> <input type=radio name=size> Small </label></p>
  <p><label> <input type=radio name=size> Medium </label></p>
  <p><label> <input type=radio name=size> Large </label></p>
 </fieldset>
 <fieldset>
  <legend> Pizza Toppings </legend>
  <p><label> <input type=checkbox> Bacon </label></p>
  <p><label> <input type=checkbox> Extra Cheese </label></p>
  <p><label> <input type=checkbox> Onion </label></p>
  <p><label> <input type=checkbox> Mushroom </label></p>
 </fieldset>
 <p><label>Preferred delivery time: <input type=time min="11:00" max="21:00" step="900"></label></p>
 <p><label>Delivery instructions: <textarea></textarea></label></p>
</form>

Finally, to make the form submittable we use the button element:

<form>
 <p><label>Customer name: <input></label></p>
 <p><label>Telephone: <input type=tel></label></p>
 <p><label>Email address: <input type=email></label></p>
 <fieldset>
  <legend> Pizza Size </legend>
  <p><label> <input type=radio name=size> Small </label></p>
  <p><label> <input type=radio name=size> Medium </label></p>
  <p><label> <input type=radio name=size> Large </label></p>
 </fieldset>
 <fieldset>
  <legend> Pizza Toppings </legend>
  <p><label> <input type=checkbox> Bacon </label></p>
  <p><label> <input type=checkbox> Extra Cheese </label></p>
  <p><label> <input type=checkbox> Onion </label></p>
  <p><label> <input type=checkbox> Mushroom </label></p>
 </fieldset>
 <p><label>Preferred delivery time: <input type=time min="11:00" max="21:00" step="900"></label></p>
 <p><label>Delivery instructions: <textarea></textarea></label></p>
 <p><button>Submit order</button></p>
</form>

4.10.1.2 Implementing the server-side processing for a form

This section is non-normative.

The exact details for writing a server-side processor are out of scope for this specification. For the purposes of this introduction, we will assume that the script at https://pizza.example.com/order.cgi is configured to accept submissions using the application/x-www-form-urlencoded format, expecting the following parameters sent in an HTTP POST body:

custname

Customer's name

custtel

Customer's telephone number

custemail

Customer's email address

size

The pizza size, either small, medium, or large

topping

A topping, specified once for each selected topping, with the allowed values being bacon, cheese, onion, and mushroom

delivery

The requested delivery time

comments

The delivery instructions

4.10.1.3 Configuring a form to communicate with a server

This section is non-normative.

Form submissions are exposed to servers in a variety of ways, most commonly as HTTP GET or POST requests. To specify the exact method used, the method attribute is specified on the form element. This doesn't specify how the form data is encoded, though; to specify that, you use the enctype attribute. You also have to specify the URL of the service that will handle the submitted data, using the action attribute.

For each form control you want submitted, you then have to give a name that will be used to refer to the data in the submission. We already specified the name for the group of radio buttons; the same attribute (name) also specifies the submission name. Radio buttons can be distinguished from each other in the submission by giving them different values, using the value attribute.

Multiple controls can have the same name; for example, here we give all the checkboxes the same name, and the server distinguishes which checkbox was checked by seeing which values are submitted with that name — like the radio buttons, they are also given unique values with the value attribute.

Given the settings in the previous section, this all becomes:

<form method="post"
      enctype="application/x-www-form-urlencoded"
      action="https://pizza.example.com/order.cgi">
 <p><label>Customer name: <input name="custname"></label></p>
 <p><label>Telephone: <input type=tel name="custtel"></label></p>
 <p><label>Email address: <input type=email name="custemail"></label></p>
 <fieldset>
  <legend> Pizza Size </legend>
  <p><label> <input type=radio name=size value="small"> Small </label></p>
  <p><label> <input type=radio name=size value="medium"> Medium </label></p>
  <p><label> <input type=radio name=size value="large"> Large </label></p>
 </fieldset>
 <fieldset>
  <legend> Pizza Toppings </legend>
  <p><label> <input type=checkbox name="topping" value="bacon"> Bacon </label></p>
  <p><label> <input type=checkbox name="topping" value="cheese"> Extra Cheese </label></p>
  <p><label> <input type=checkbox name="topping" value="onion"> Onion </label></p>
  <p><label> <input type=checkbox name="topping" value="mushroom"> Mushroom </label></p>
 </fieldset>
 <p><label>Preferred delivery time: <input type=time min="11:00" max="21:00" step="900" name="delivery"></label></p>
 <p><label>Delivery instructions: <textarea name="comments"></textarea></label></p>
 <p><button>Submit order</button></p>
</form>

There is no particular significance to the way some of the attributes have their values quoted and others don't. The HTML syntax allows a variety of equally valid ways to specify attributes, as discussed in the syntax section.

For example, if the customer entered "Denise Lawrence" as their name, "555-321-8642" as their telephone number, did not specify an email address, asked for a medium-sized pizza, selected the Extra Cheese and Mushroom toppings, entered a delivery time of 7pm, and left the delivery instructions text control blank, the user agent would submit the following to the online web service:

custname=Denise+Lawrence&custtel=555-321-8642&custemail=&size=medium&topping=cheese&topping=mushroom&delivery=19%3A00&comments=

4.10.1.4 Client-side form validation

This section is non-normative.

Forms can be annotated in such a way that the user agent will check the user's input before the form is submitted. The server still has to verify the input is valid (since hostile users can easily bypass the form validation), but it allows the user to avoid the wait incurred by having the server be the sole checker of the user's input.

The simplest annotation is the required attribute, which can be specified on input elements to indicate that the form is not to be submitted until a value is given. By adding this attribute to the customer name, pizza size, and delivery time fields, we allow the user agent to notify the user when the user submits the form without filling in those fields:

<form method="post"
      enctype="application/x-www-form-urlencoded"
      action="https://pizza.example.com/order.cgi">
 <p><label>Customer name: <input name="custname" required></label></p>
 <p><label>Telephone: <input type=tel name="custtel"></label></p>
 <p><label>Email address: <input type=email name="custemail"></label></p>
 <fieldset>
  <legend> Pizza Size </legend>
  <p><label> <input type=radio name=size required value="small"> Small </label></p>
  <p><label> <input type=radio name=size required value="medium"> Medium </label></p>
  <p><label> <input type=radio name=size required value="large"> Large </label></p>
 </fieldset>
 <fieldset>
  <legend> Pizza Toppings </legend>
  <p><label> <input type=checkbox name="topping" value="bacon"> Bacon </label></p>
  <p><label> <input type=checkbox name="topping" value="cheese"> Extra Cheese </label></p>
  <p><label> <input type=checkbox name="topping" value="onion"> Onion </label></p>
  <p><label> <input type=checkbox name="topping" value="mushroom"> Mushroom </label></p>
 </fieldset>
 <p><label>Preferred delivery time: <input type=time min="11:00" max="21:00" step="900" name="delivery" required></label></p>
 <p><label>Delivery instructions: <textarea name="comments"></textarea></label></p>
 <p><button>Submit order</button></p>
</form>

It is also possible to limit the length of the input, using the maxlength attribute. By adding this to the textarea element, we can limit users to 1000 characters, preventing them from writing huge essays to the busy delivery drivers instead of staying focused and to the point:

<form method="post"
      enctype="application/x-www-form-urlencoded"
      action="https://pizza.example.com/order.cgi">
 <p><label>Customer name: <input name="custname" required></label></p>
 <p><label>Telephone: <input type=tel name="custtel"></label></p>
 <p><label>Email address: <input type=email name="custemail"></label></p>
 <fieldset>
  <legend> Pizza Size </legend>
  <p><label> <input type=radio name=size required value="small"> Small </label></p>
  <p><label> <input type=radio name=size required value="medium"> Medium </label></p>
  <p><label> <input type=radio name=size required value="large"> Large </label></p>
 </fieldset>
 <fieldset>
  <legend> Pizza Toppings </legend>
  <p><label> <input type=checkbox name="topping" value="bacon"> Bacon </label></p>
  <p><label> <input type=checkbox name="topping" value="cheese"> Extra Cheese </label></p>
  <p><label> <input type=checkbox name="topping" value="onion"> Onion </label></p>
  <p><label> <input type=checkbox name="topping" value="mushroom"> Mushroom </label></p>
 </fieldset>
 <p><label>Preferred delivery time: <input type=time min="11:00" max="21:00" step="900" name="delivery" required></label></p>
 <p><label>Delivery instructions: <textarea name="comments" maxlength=1000></textarea></label></p>
 <p><button>Submit order</button></p>
</form>

When a form is submitted, invalid events are fired at each form control that is invalid. This can be useful for displaying a summary of the problems with the form, since typically the browser itself will only report one problem at a time.

4.10.1.5 Enabling client-side automatic filling of form controls

This section is non-normative.

Some browsers attempt to aid the user by automatically filling form controls rather than having the user reenter their information each time. For example, a field asking for the user's telephone number can be automatically filled with the user's phone number.

To help the user agent with this, the autocomplete attribute can be used to describe the field's purpose. In the case of this form, we have three fields that can be usefully annotated in this way: the information about who the pizza is to be delivered to. Adding this information looks like this:

<form method="post"
      enctype="application/x-www-form-urlencoded"
      action="https://pizza.example.com/order.cgi">
 <p><label>Customer name: <input name="custname" required autocomplete="shipping name"></label></p>
 <p><label>Telephone: <input type=tel name="custtel" autocomplete="shipping tel"></label></p>
 <p><label>Email address: <input type=email name="custemail" autocomplete="shipping email"></label></p>
 <fieldset>
  <legend> Pizza Size </legend>
  <p><label> <input type=radio name=size required value="small"> Small </label></p>
  <p><label> <input type=radio name=size required value="medium"> Medium </label></p>
  <p><label> <input type=radio name=size required value="large"> Large </label></p>
 </fieldset>
 <fieldset>
  <legend> Pizza Toppings </legend>
  <p><label> <input type=checkbox name="topping" value="bacon"> Bacon </label></p>
  <p><label> <input type=checkbox name="topping" value="cheese"> Extra Cheese </label></p>
  <p><label> <input type=checkbox name="topping" value="onion"> Onion </label></p>
  <p><label> <input type=checkbox name="topping" value="mushroom"> Mushroom </label></p>
 </fieldset>
 <p><label>Preferred delivery time: <input type=time min="11:00" max="21:00" step="900" name="delivery" required></label></p>
 <p><label>Delivery instructions: <textarea name="comments" maxlength=1000></textarea></label></p>
 <p><button>Submit order</button></p>
</form>

4.10.1.6 Improving the user experience on mobile devices

This section is non-normative.

Some devices, in particular those with virtual keyboards can provide the user with multiple input modalities. For example, when typing in a credit card number the user may wish to only see keys for digits 0-9, while when typing in their name they may wish to see a form field that by default capitalizes each word.

Using the inputmode attribute we can select appropriate input modalities:

<form method="post"
      enctype="application/x-www-form-urlencoded"
      action="https://pizza.example.com/order.cgi">
 <p><label>Customer name: <input name="custname" required autocomplete="shipping name"></label></p>
 <p><label>Telephone: <input type=tel name="custtel" autocomplete="shipping tel"></label></p>
 <p><label>Buzzer code: <input name="custbuzz" inputmode="numeric"></label></p>
 <p><label>Email address: <input type=email name="custemail" autocomplete="shipping email"></label></p>
 <fieldset>
  <legend> Pizza Size </legend>
  <p><label> <input type=radio name=size required value="small"> Small </label></p>
  <p><label> <input type=radio name=size required value="medium"> Medium </label></p>
  <p><label> <input type=radio name=size required value="large"> Large </label></p>
 </fieldset>
 <fieldset>
  <legend> Pizza Toppings </legend>
  <p><label> <input type=checkbox name="topping" value="bacon"> Bacon </label></p>
  <p><label> <input type=checkbox name="topping" value="cheese"> Extra Cheese </label></p>
  <p><label> <input type=checkbox name="topping" value="onion"> Onion </label></p>
  <p><label> <input type=checkbox name="topping" value="mushroom"> Mushroom </label></p>
 </fieldset>
 <p><label>Preferred delivery time: <input type=time min="11:00" max="21:00" step="900" name="delivery" required></label></p>
 <p><label>Delivery instructions: <textarea name="comments" maxlength=1000></textarea></label></p>
 <p><button>Submit order</button></p>
</form>

4.10.1.7 The difference between the field type, the autofill field name, and the input modality

This section is non-normative.

The type, autocomplete, and inputmode attributes can seem confusingly similar. For instance, in all three cases, the string "email" is a valid value. This section attempts to illustrate the difference between the three attributes and provides advice suggesting how to use them.

The type attribute on input elements decides what kind of control the user agent will use to expose the field. Choosing between different values of this attribute is the same choice as choosing whether to use an input element, a textarea element, a select element, etc.

The autocomplete attribute, in contrast, describes what the value that the user will enter actually represents. Choosing between different values of this attribute is the same choice as choosing what the label for the element will be.

First, consider telephone numbers. If a page is asking for a telephone number from the user, the right form control to use is <input type=tel>. However, which autocomplete value to use depends on which phone number the page is asking for, whether they expect a telephone number in the international format or just the local format, and so forth.

For example, a page that forms part of a checkout process on an e-commerce site for a customer buying a gift to be shipped to a friend might need both the buyer's telephone number (in case of payment issues) and the friend's telephone number (in case of delivery issues). If the site expects international phone numbers (with the country code prefix), this could thus look like this:

<p><label>Your phone number: <input type=tel name=custtel autocomplete="billing tel"></label>
<p><label>Recipient's phone number: <input type=tel name=shiptel autocomplete="shipping tel"></label>
<p>Please enter complete phone numbers including the country code prefix, as in "+1 555 123 4567".

But if the site only supports British customers and recipients, it might instead look like this (notice the use of tel-national rather than tel):

<p><label>Your phone number: <input type=tel name=custtel autocomplete="billing tel-national"></label>
<p><label>Recipient's phone number: <input type=tel name=shiptel autocomplete="shipping tel-national"></label>
<p>Please enter complete UK phone numbers, as in "(01632) 960 123".

Now, consider a person's preferred languages. The right autocomplete value is language. However, there could be a number of different form controls used for the purpose: a text control (<input type=text>), a drop-down list (<select>), radio buttons (<input type=radio>), etc. It only depends on what kind of interface is desired.

Finally, consider names. If a page just wants one name from the user, then the relevant control is <input type=text>. If the page is asking for the user's full name, then the relevant autocomplete value is name.

<p><label>Japanese name: <input name="j" type="text" autocomplete="section-jp name"></label>
<label>Romanized name: <input name="e" type="text" autocomplete="section-en name"></label>

In this example, the "section-*" keywords in the autocomplete attributes' values tell the user agent that the two fields expect different names. Without them, the user agent could automatically fill the second field with the value given in the first field when the user gave a value to the first field.

The "-jp" and "-en" parts of the keywords are opaque to the user agent; the user agent cannot guess, from those, that the two names are expected to be in Japanese and English respectively.

Separate from the choices regarding type and autocomplete, the inputmode attribute decides what kind of input modality (e.g., virtual keyboard) to use, when the control is a text control.

Consider credit card numbers. The appropriate input type is not <input type=number>, as explained below; it is instead <input type=text>. To encourage the user agent to use a numeric input modality anyway (e.g., a virtual keyboard displaying only digits), the page would use

<p><label>Credit card number:
                <input name="cc" type="text" inputmode="numeric" pattern="[0-9]{8,19}" autocomplete="cc-number">
</label></p>

4.10.1.8 Date, time, and number formats

This section is non-normative.

In this pizza delivery example, the times are specified in the format "HH:MM": two digits for the hour, in 24-hour format, and two digits for the time. (Seconds could also be specified, though they are not necessary in this example.)

In some locales, however, times are often expressed differently when presented to users. For example, in the United States, it is still common to use the 12-hour clock with an am/pm indicator, as in "2pm". In France, it is common to separate the hours from the minutes using an "h" character, as in "14h00".

Similar issues exist with dates, with the added complication that even the order of the components is not always consistent — for example, in Cyprus the first of February 2003 would typically be written "1/2/03", while that same date in Japan would typically be written as "2003年02月01日" — and even with numbers, where locales differ, for example, in what punctuation is used as the decimal separator and the thousands separator.

It is therefore important to distinguish the time, date, and number formats used in HTML and in form submissions, which are always the formats defined in this specification (and based on the well-established ISO 8601 standard for computer-readable date and time formats), from the time, date, and number formats presented to the user by the browser and accepted as input from the user by the browser.

The format used "on the wire", i.e., in HTML markup and in form submissions, is intended to be computer-readable and consistent irrespective of the user's locale. Dates, for instance, are always written in the format "YYYY-MM-DD", as in "2003-02-01". While some users might see this format, others might see it as "01.02.2003" or "February 1, 2003".

The time, date, or number given by the page in the wire format is then translated to the user's preferred presentation (based on user preferences or on the locale of the page itself), before being displayed to the user. Similarly, after the user inputs a time, date, or number using their preferred format, the user agent converts it back to the wire format before putting it in the DOM or submitting it.

This allows scripts in pages and on servers to process times, dates, and numbers in a consistent manner without needing to support dozens of different formats, while still supporting the users' needs.

See also the implementation notes regarding localization of form controls.

4.10.2 Categories

Mostly for historical reasons, elements in this section fall into several overlapping (but subtly different) categories in addition to the usual ones like flow content, phrasing content, and interactive content.

A number of the elements are form-associated elements, which means they can have a form owner.

• button
• fieldset
• input
• object
• output
• select
• textarea
• img
• form-associated custom elements

The form-associated elements fall into several subcategories:

Listed elements

Denotes elements that are listed in the form.elements and fieldset.elements APIs. These elements also have a form content attribute, and a matching form IDL attribute, that allow authors to specify an explicit form owner.

• button
• fieldset
• input
• object
• output
• select
• textarea
• form-associated custom elements

Submittable elements

Denotes elements that can be used for constructing the entry list when a form element is submitted.

• button
• input
• select
• textarea
• form-associated custom elements

Some submittable elements can be, depending on their attributes, buttons. The prose below defines when an element is a button. Some buttons are specifically submit buttons.

Resettable elements

Denotes elements that can be affected when a form element is reset.

• input
• output
• select
• textarea
• form-associated custom elements

Autocapitalize-and-autocorrect-inheriting elements

Denotes elements that inherit the autocapitalize and autocorrect attributes from their form owner.

• button
• fieldset
• input
• output
• select
• textarea

Some elements, not all of them form-associated, are categorized as labelable elements. These are elements that can be associated with a label element.

• button
• input (if the type attribute is not in the Hidden state)
• meter
• output
• progress
• select
• textarea
• form-associated custom elements

4.10.3 The form element

Categories:

Flow content.

Palpable content.

Contexts in which this element can be used:

Where flow content is expected.

Content model:

Flow content, but with no form element descendants.

Tag omission in text/html:

Neither tag is omissible.

Content attributes:

Global attributes

accept-charset — Character encodings to use for form submission

action — URL to use for form submission

autocomplete — Default setting for autofill feature for controls in the form

enctype — Entry list encoding type to use for form submission

method — Variant to use for form submission

name — Name of form to use in the document.forms API

novalidate — Bypass form control validation for form submission

target — Navigable for form submission

rel

Accessibility considerations:

For authors.

For implementers.

DOM interface:

[Exposed=Window,
 LegacyOverrideBuiltIns,
 LegacyUnenumerableNamedProperties]
interface HTMLFormElement : HTMLElement {
  [HTMLConstructor] constructor();

  [CEReactions] attribute DOMString acceptCharset;
  [CEReactions] attribute USVString action;
  [CEReactions] attribute DOMString autocomplete;
  [CEReactions] attribute DOMString enctype;
  [CEReactions] attribute DOMString encoding;
  [CEReactions] attribute DOMString method;
  [CEReactions] attribute DOMString name;
  [CEReactions] attribute boolean noValidate;
  [CEReactions] attribute DOMString target;
  [CEReactions] attribute DOMString rel;
  [SameObject, PutForwards=value] readonly attribute DOMTokenList relList;

  [SameObject] readonly attribute HTMLFormControlsCollection elements;
  readonly attribute unsigned long length;
  getter Element (unsigned long index);
  getter (RadioNodeList or Element) (DOMString name);

  undefined submit();
  undefined requestSubmit(optional HTMLElement? submitter = null);
  [CEReactions] undefined reset();
  boolean checkValidity();
  boolean reportValidity();
};

The form element represents a hyperlink that can be manipulated through a collection of form-associated elements, some of which can represent editable values that can be submitted to a server for processing.

The accept-charset attribute gives the character encodings that are to be used for the submission. If specified, the value must be an ASCII case-insensitive match for "UTF-8". [ENCODING]

The name attribute represents the form's name within the forms collection. The value must not be the empty string, and the value must be unique amongst the form elements in the forms collection that it is in, if any.

The autocomplete attribute is an enumerated attribute with the following keywords and states:

The attribute's missing value default and invalid value default are both the on state.

The action, enctype, method, novalidate, and target attributes are attributes for form submission.

The rel attribute on form elements controls what kinds of links the elements create. The attribute's value must be a unordered set of unique space-separated tokens. The allowed keywords and their meanings are defined in an earlier section.

rel's supported tokens are the keywords defined in HTML link types which are allowed on form elements, impact the processing model, and are supported by the user agent. The possible supported tokens are noreferrer, noopener, and opener. rel's supported tokens must only include the tokens from this list that the user agent implements the processing model for.

form.elements

✔MDN

HTMLFormElement/elements

Support in all current engines.

Firefox1+Safari3+Chrome1+

---

Opera8+Edge79+

---

Edge (Legacy)12+Internet Explorer5.5+

---

Firefox Android?Safari iOS1+Chrome Android?WebView Android?Samsung Internet?Opera Android10.1+

Returns an HTMLFormControlsCollection of the form controls in the form (excluding image buttons for historical reasons).

form.length

✔MDN

HTMLFormElement/length

Support in all current engines.

Firefox1+Safari3+Chrome1+

---

Opera12.1+Edge79+

---

Edge (Legacy)12+Internet Explorer5.5+

---

Firefox Android?Safari iOS1+Chrome Android?WebView Android?Samsung Internet?Opera Android12.1+

Returns the number of form controls in the form (excluding image buttons for historical reasons).

form[index]

Returns the indexth element in the form (excluding image buttons for historical reasons).

form[name]

Returns the form control (or, if there are several, a RadioNodeList of the form controls) in the form with the given ID or name (excluding image buttons for historical reasons); or, if there are none, returns the img element with the given ID.

Once an element has been referenced using a particular name, that name will continue being available as a way to reference that element in this method, even if the element's actual ID or name changes, for as long as the element remains in the tree.

If there are multiple matching items, then a RadioNodeList object containing all those elements is returned.

form.submit()

✔MDN

HTMLFormElement/submit

Support in all current engines.

Firefox1+Safari3+Chrome1+

---

Opera12.1+Edge79+

---

Edge (Legacy)12+Internet Explorer5.5+

---

Firefox Android?Safari iOS1+Chrome Android?WebView Android?Samsung Internet?Opera Android12.1+

Submits the form, bypassing interactive constraint validation and without firing a submit event.

form.requestSubmit([ submitter ])

✔MDN

HTMLFormElement/requestSubmit

Support in all current engines.

Firefox75+Safari16+Chrome76+

---

Opera?Edge79+

---

Edge (Legacy)?Internet ExplorerNo

---

Firefox Android?Safari iOS?Chrome Android?WebView Android?Samsung Internet?Opera Android?

Requests to submit the form. Unlike submit(), this method includes interactive constraint validation and firing a submit event, either of which can cancel submission.

The submitter argument can be used to point to a specific submit button, whose formaction, formenctype, formmethod, formnovalidate, and formtarget attributes can impact submission. Additionally, the submitter will be included when constructing the entry list for submission; normally, buttons are excluded.

form.reset()

✔MDN

HTMLFormElement/reset

Support in all current engines.

Firefox1+Safari3+Chrome1+

---

Opera8+Edge79+

---

Edge (Legacy)12+Internet Explorer5.5+

---

Firefox Android?Safari iOS1+Chrome Android?WebView Android?Samsung Internet?Opera Android10.1+

Resets the form.

form.checkValidity()

Returns true if the form's controls are all valid; otherwise, returns false.

form.reportValidity()

Returns true if the form's controls are all valid; otherwise, returns false and informs the user.

The autocomplete IDL attribute must reflect the content attribute of the same name, limited to only known values.

The name and rel IDL attributes must reflect the content attribute of the same name.

The acceptCharset IDL attribute must reflect the accept-charset content attribute.

The relList IDL attribute must reflect the rel content attribute.

The elements IDL attribute must return an HTMLFormControlsCollection rooted at the form element's root, whose filter matches listed elements whose form owner is the form element, with the exception of input elements whose type attribute is in the Image Button state, which must, for historical reasons, be excluded from this particular collection.

The length IDL attribute must return the number of nodes represented by the elements collection.

The supported property indices at any instant are the indices supported by the object returned by the elements attribute at that instant.

To determine the value of an indexed property for a form element, the user agent must return the value returned by the item method on the elements collection, when invoked with the given index as its argument.

Each form element has a mapping of names to elements called the past names map. It is used to persist names of controls even when they change names.

The supported property names consist of the names obtained from the following algorithm, in the order obtained from this algorithm:

1. Let sourced names be an initially empty ordered list of tuples consisting of a string, an element, a source, where the source is either id, name, or past, and, if the source is past, an age.

2. For each listed element candidate whose form owner is the form element, with the exception of any input elements whose type attribute is in the Image Button state:

   1. If candidate has an id attribute, add an entry to sourced names with that id attribute's value as the string, candidate as the element, and id as the source.

   2. If candidate has a name attribute, add an entry to sourced names with that name attribute's value as the string, candidate as the element, and name as the source.

3. For each img element candidate whose form owner is the form element:

   1. If candidate has an id attribute, add an entry to sourced names with that id attribute's value as the string, candidate as the element, and id as the source.

   2. If candidate has a name attribute, add an entry to sourced names with that name attribute's value as the string, candidate as the element, and name as the source.

4. For each entry past entry in the past names map, add an entry to sourced names with the past entry's name as the string, past entry's element as the element, past as the source, and the length of time past entry has been in the past names map as the age.

5. Sort sourced names by tree order of the element entry of each tuple, sorting entries with the same element by putting entries whose source is id first, then entries whose source is name, and finally entries whose source is past, and sorting entries with the same element and source by their age, oldest first.

6. Remove any entries in sourced names that have the empty string as their name.

7. Remove any entries in sourced names that have the same name as an earlier entry in the map.

8. Return the list of names from sourced names, maintaining their relative order.

To determine the value of a named property name for a form element, the user agent must run the following steps:

1. Let candidates be a live RadioNodeList object containing all the listed elements, whose form owner is the form element, that have either an id attribute or a name attribute equal to name, with the exception of input elements whose type attribute is in the Image Button state, in tree order.

2. If candidates is empty, let candidates be a live RadioNodeList object containing all the img elements, whose form owner is the form element, that have either an id attribute or a name attribute equal to name, in tree order.

3. If candidates is empty, name is the name of one of the entries in the form element's past names map: return the object associated with name in that map.

4. If candidates contains more than one node, return candidates.

5. Otherwise, candidates contains exactly one node. Add a mapping from name to the node in candidates in the form element's past names map, replacing the previous entry with the same name, if any.

6. Return the node in candidates.

If an element listed in a form element's past names map changes form owner, then its entries must be removed from that map.

The submit() method steps are to submit this from this, with submitted from submit() method set to true.

The requestSubmit(submitter) method, when invoked, must run the following steps:

1. If submitter is not null, then:

   1. If submitter is not a submit button, then throw a TypeError.

   2. If submitter's form owner is not this form element, then throw a "NotFoundError" DOMException.

2. Otherwise, set submitter to this form element.

3. Submit this form element, from submitter.

The reset() method, when invoked, must run the following steps:

1. If the form element is marked as locked for reset, then return.

2. Mark the form element as locked for reset.

3. Reset the form element.

4. Unmark the form element as locked for reset.

If the checkValidity() method is invoked, the user agent must statically validate the constraints of the form element, and return true if the constraint validation return a positive result, and false if it returned a negative result.

If the reportValidity() method is invoked, the user agent must interactively validate the constraints of the form element, and return true if the constraint validation return a positive result, and false if it returned a negative result.

<form action="https://www.google.com/search" method="get">
 <label>Google: <input type="search" name="q"></label> <input type="submit" value="Search...">
</form>
<form action="https://www.bing.com/search" method="get">
 <label>Bing: <input type="search" name="q"></label> <input type="submit" value="Search...">
</form>

4.10.4 The label element

Categories:

Flow content.

Phrasing content.

Interactive content.

Palpable content.

Contexts in which this element can be used:

Where phrasing content is expected.

Content model:

Phrasing content, but with no descendant labelable elements unless it is the element's labeled control, and no descendant label elements.

Tag omission in text/html:

Neither tag is omissible.

Content attributes:

Global attributes

for — Associate the label with form control

Accessibility considerations:

For authors.

For implementers.

DOM interface:

[Exposed=Window]
interface HTMLLabelElement : HTMLElement {
  [HTMLConstructor] constructor();

  readonly attribute HTMLFormElement? form;
  [CEReactions] attribute DOMString htmlFor;
  readonly attribute HTMLElement? control;
};

The label element represents a caption in a user interface. The caption can be associated with a specific form control, known as the label element's labeled control, either using the for attribute, or by putting the form control inside the label element itself.

Except where otherwise specified by the following rules, a label element has no labeled control.

The for attribute may be specified to indicate a form control with which the caption is to be associated. If the attribute is specified, the attribute's value must be the ID of a labelable element in the same tree as the label element. If the attribute is specified and there is an element in the tree whose ID is equal to the value of the for attribute, and the first such element in tree order is a labelable element, then that element is the label element's labeled control.

If the for attribute is not specified, but the label element has a labelable element descendant, then the first such descendant in tree order is the label element's labeled control.

The label element's exact default presentation and behavior, in particular what its activation behavior might be, if anything, should match the platform's label behavior. The activation behavior of a label element for events targeted at interactive content descendants of a label element, and any descendants of those interactive content descendants, must be to do nothing.

Form-associated custom elements are labelable elements, so for user agents where the label element's activation behavior impacts the labeled control, both built-in and custom elements will be impacted.

<label><input type=checkbox name=lost> Lost</label>

<label><my-checkbox name=lost></my-checkbox> Lost</label>

<p><label>Full name: <input name=fn> <small>Format: First Last</small></label></p>
<p><label>Age: <input name=age type=number min=0></label></p>
<p><label>Post code: <input name=pc> <small>Format: AB12 3CD</small></label></p>

label.control

✔MDN

HTMLLabelElement/control

Support in all current engines.

Firefox4+Safari5.1+Chrome6+

---

Opera12.1+Edge79+

---

Edge (Legacy)18Internet ExplorerNo

---

Firefox Android?Safari iOS?Chrome Android?WebView Android3+Samsung Internet?Opera Android12.1+

Returns the form control that is associated with this element.

label.form

✔MDN

HTMLLabelElement/form

Support in all current engines.

Firefox1+Safari3+Chrome1+

---

Opera12.1+Edge79+

---

Edge (Legacy)12+Internet Explorer6+

---

Firefox Android?Safari iOS1+Chrome Android?WebView Android?Samsung Internet?Opera Android12.1+

Returns the form owner of the form control that is associated with this element.

Returns null if there isn't one.

The htmlFor IDL attribute must reflect the for content attribute.

The control IDL attribute must return the label element's labeled control, if any, or null if there isn't one.

The form IDL attribute must run the following steps:

1. If the label element has no labeled control, then return null.

2. If the label element's labeled control is not a form-associated element, then return null.

3. Return the label element's labeled control's form owner (which can still be null).

The form IDL attribute on the label element is different from the form IDL attribute on listed form-associated elements, and the label element does not have a form content attribute.

control.labels

✔MDN

HTMLButtonElement/labels

Support in all current engines.

Firefox56+Safari5.1+Chrome6+

---

Opera12.1+Edge79+

---

Edge (Legacy)18Internet ExplorerNo

---

Firefox Android?Safari iOS?Chrome Android?WebView Android3+Samsung Internet?Opera Android12.1+

HTMLInputElement/labels

Support in all current engines.

Firefox56+Safari5+Chrome6+

---

Opera12.1+Edge79+

---

Edge (Legacy)18Internet ExplorerNo

---

Firefox Android?Safari iOS?Chrome Android?WebView Android3+Samsung Internet?Opera Android12.1+

HTMLMeterElement/labels

Support in all current engines.

Firefox56+Safari6+Chrome6+

---

Opera12.1+Edge79+

---

Edge (Legacy)18Internet ExplorerNo

---

Firefox Android?Safari iOS?Chrome Android?WebView Android?Samsung Internet?Opera Android12.1+

HTMLOutputElement/labels

Support in all current engines.

Firefox56+Safari5.1+Chrome9+

---

Opera12.1+Edge79+

---

Edge (Legacy)18Internet ExplorerNo

---

Firefox Android?Safari iOS?Chrome Android?WebView Android3+Samsung Internet?Opera Android12.1+

HTMLProgressElement/labels

Support in all current engines.

Firefox56+Safari6+Chrome6+

---

Opera12.1+Edge79+

---

Edge (Legacy)18Internet ExplorerNo

---

Firefox Android?Safari iOS?Chrome Android?WebView Android?Samsung Internet?Opera Android12.1+

HTMLSelectElement/labels

Support in all current engines.

Firefox56+Safari5.1+Chrome6+

---

Opera12.1+Edge79+

---

Edge (Legacy)18Internet ExplorerNo

---

Firefox Android?Safari iOS?Chrome Android?WebView Android3+Samsung Internet?Opera Android12.1+

HTMLTextAreaElement/labels

Support in all current engines.

Firefox56+Safari5.1+Chrome6+

---

Opera12.1+Edge79+

---

Edge (Legacy)18Internet ExplorerNo

---

Firefox Android?Safari iOS?Chrome Android?WebView Android3+Samsung Internet?Opera Android12.1+

Returns a NodeList of all the label elements that the form control is associated with.

Labelable elements and all input elements have a live NodeList object associated with them that represents the list of label elements, in tree order, whose labeled control is the element in question. The labels IDL attribute of labelable elements that are not form-associated custom elements, and the labels IDL attribute of input elements, on getting, must return that NodeList object, and that same value must always be returned, unless this element is an input element whose type attribute is in the Hidden state, in which case it must instead return null.

Form-associated custom elements don't have a labels IDL attribute. Instead, their ElementInternals object has a labels IDL attribute. On getting, it must throw a "NotSupportedError" DOMException if the target element is not a form-associated custom element. Otherwise, it must return that NodeList object, and that same value must always be returned.

<!doctype html>
<p><label><input></label></p>
<script>
 const input = document.querySelector('input');
 const labels = input.labels;
 console.assert(labels.length === 1);

 input.type = 'hidden';
 console.assert(labels.length === 0); // the input is no longer the label's labeled control
 console.assert(input.labels === null);

 input.type = 'checkbox';
 console.assert(labels.length === 1); // the input is once again the label's labeled control
 console.assert(input.labels === labels); // same value as returned originally
</script>