Whether your window glass is damaged or it’s time for an upgrade, replacing the glass in your windows can make a big difference in its energy performance, and is cheaper than complete window replacement. Our guide outlines your options for window glass repair and replacement, which can commonly cost between $300 and $880 per window after installation, though the national average is $375.*

Our guide also covers the biggest factors that impact window glass replacement costs and how to keep your expenses more affordable. In short, the larger and more complex your window, the more you can expect to pay for both the product and installation. 
*Article cost data via Fixr unless otherwise noted.

---

Do I Need To Replace My Window Glass?

There are three main reasons for replacing window glass: poor performance, damage, and condensation.

If you live in an older house or have low-quality windows, you may notice that your home doesn’t regulate temperature well or that your electric bills are unreasonably high. These are good signs to look into upgrading to energy-efficient windows that provide a better return on investment.

If you have damaged window glass, it’s likely only a matter of time before you experience draftiness, moisture leaks, or even structural damage. Whether you can simply replace the glass depends on the extent of the damage. In severe cases, you may need to replace the entire window. 

Having condensation between your window panes usually indicates that your seal has gone bad. If left unfixed, moisture buildup can lead to mold growth and window deterioration. Again, this could simply be a glass issue, or it could require a full unit replacement if deterioration has started. 
Several other problems can be fixed without an entire window replacement, though. Here are some common issues that tend to require only minor repairs:

• Crack repair: A contractor can sometimes repair small glass cracks with resin, usually for $100–$500.
• Frame repair: A broken window frame doesn’t always need to be replaced. Wood frames can typically be repaired for $175–$300, aluminum frames for $250–$500, and vinyl or fiberglass frames for $300–$600.
• Reglazing: The putty between the window panes and the frame can break down over time, compromising the window’s weatherproofing. Replacing the putty is called reglazing and typically costs $250–$500 per window.
• Seal replacement: A window frame’s seal, which sits between multiple glass panes, can degrade and cause air and water leaks. Replacing it costs about $70–$120.

---

Which Factors Affect Window Glass Replacement Costs?

Your overall project cost is primarily determined by window style, glass type, window size, number of panes, and labor prices.

• Window size: The larger the window, the more materials and labor are required to fix it. You can read our guide on window measurement for more detail.
• Window type: Some window designs are more complex and require more labor to replace the glass. 
• Glass type: Specialty glass costs more than standard glass.
• Number of panes: Single-pane glass costs less to replace than double- or triple-pane glass.
• Labor: Several climate and geographical factors contribute to professional window installation costs.

Window Size

Larger panes are more expensive, so window size is usually the most significant factor when determining price. Below are some standard window dimensions and how much they cost to replace.

Window Size in Inches	Cost Range
24″x36″	$130–$180
30″x36″	$160–$270
24″x54″	$200–$285
36″x42″	$320–$420
28″x58″	$330–$440
46″x46″	$380–$520
46″x54″	$650–$810

Window Type

The window type also matters, mostly as it relates to its size and number of panes. Here are some common window styles and details about how their size and type affect cost.

• Bay windows: A bay window consists of three panels of glass that project outward from a home’s exterior. The two side panes are typically skewed at a 45-degree angle from the fixed center pane and may be fixed or operable. These windows are among the most expensive to replace because of the amount of glass.
• Bow windows: Whereas a bay window has three panels, a bow window usually has four to six fixed sections forming a semicircle that projects outward from a wall. These are also expensive to repair.
• Casement windows: A casement window has a hinge on one side and opens outward, usually via a hand crank. They vary in size from small vents to large floor-to-ceiling windows, so prices also vary.
• Egress windows: Building codes require some basements to have emergency exits in the form of egress windows. They must be 5.7 square feet, 20 inches wide by 24 inches high, and open fully.
• Picture: Picture windows are fixed with no moving parts. They’re typically large, so the glass can be pricey to replace.
• Sashed windows: The most common residential windows are sashed windows. They’re typically either single-hung windows, where only one sash can be raised and lowered, or double-hung windows, where both sashes are operable.
• Skylights: Skylights vary in size and features; some may open partially or contain thicker glass. The price to replace their glass also varies widely.
• Storm windows: These are installed on top of sashed windows and protect them from high winds, debris, or air leakage. Because they’re secondary windows that aren’t nailed into the house’s wooden frame, they’re less expensive to replace.

Cost of Glass Replacement by Window Type

Sash, picture, and egress windows are the most budget-friendly window types to replace glass in. Be prepared to pay substantially more for complex designs, such as bay, bow, and skylight windows. 

Type of Window	Cost Range
Storm	$100–$400
Egress	$100–$800
Sash	$100–$950
Casement	$150–$1,190
Skylight	$150–$3,500
Picture	$175–$925
Bay	$320–$3,800
Bow	$690–$1,800

Glass Type

Transparent, untreated glass is the least expensive to replace. However, it’s also the least secure and energy-efficient. Some homeowners choose windows with specialty glass to increase privacy and security or lower energy bills. 

These are common options your window company may give you when choosing glass:

• Argon-filled glass units: Quality window makers add nontoxic argon gas between window panes for extra insulation and energy performance. This is a worthwhile investment since it helps keep heat out in summer and inside in winter.
• Frosted glass: is used to add decoration and increase privacy since it obscures the view of anything behind it while letting some light through.
• Krypton-filled glass units: Krypton gas is another option for adding insulation between window panes. It’s slightly more effective than argon but much more expensive.
• Laminated glass: is especially impact-resistant. It will stay in place instead of falling out of the window frame even when broken, making it highly secure.
• Low-emissivity glass: is treated with a special metallic coating that blocks infrared and UV rays. This not only helps to insulate the glass but can also protect items in your home from fading in sunlight.
• Stained glass: Custom pieces such as stained glass windows vary greatly in price based on color, design, and intricacy. That means the cost of replacing them also varies substantially.
• Tempered glass: Sometimes called safety glass, tempered glass is heat-treated. When it breaks, it forms pebble-like pieces that are safer to handle than large shards. It’s necessary for glass in doors, around doors, and close to the floor.

Cost of Glass Replacement by Type of Glass

Some glass types are priced by the square foot, but we’ve listed out typical cost ranges below.

Type of Glass	Cost Range
Argon-filled glass	$375–$850
Frosted glass	$350–$800
Krypton-filled glass	$525–$1,190
Laminated glass	$275–$625
Low-e glass	$350–$840
Stained glass	$100–$10,000
Tempered glass	$180–$700

Number of Window Panes

Single-pane windows are the most affordable, but most window companies today recommend double- or triple-pane windows for best energy performance. More panes mean more insulation, so your HVAC system won’t have to work as hard to maintain a comfortable temperature in your home, saving you money. The U.S. Department of Energy estimates that switching from single- to double-pane glass in all of your home’s windows can save you $101–$583 a year on heating and cooling costs. The exact amount depends on your local climate. 

The drawback is that double- and triple-pane windows are more expensive. However, the federal government offers an Energy Efficient Home Improvement Credit for homeowners who install Energy Star-rated exterior windows. Those who qualify will receive a credit for 30% of the total replacement project cost, up to $600, on their federal taxes. This helps to offset the price of high-end window upgrades.

Cost of Glass Replacement by Number of Panes

Here’s how much glass replacement typically costs for single-, double-, and triple-pane windows.

Number of Panes	Cost Range
Single-pane glass	$150–$400
Double-pane glass	$150–$600
Triple-pane glass	$400–$950

Labor Costs

When you need your window glass replaced, you’re not just buying new glass—you must pay for an experienced professional to install it. Glazing and window repair generally costs about $50–$125 per hour, or it may be a flat service fee, especially if you only need one pane fixed. Labor prices often depend on the local cost of living and how busy the contractor is. Time of year can also matter since window installers are usually busiest in summer and spring and may charge more.

---

What Other Factors Can Increase Glass Replacement Costs?

Depending on your project, the following factors may also affect what you pay for glass replacement.

Emergency Glass Services

If your broken window is the result of a break-in, or if bad weather is imminent, you may need to have the glass replaced immediately. Some glaziers offer 24/7 and weekend services for these circumstances. You’ll pay substantially more in labor costs, usually between $120 and $150 per hour plus materials, but you’ll get the problem fixed right away.

Replacement Type

If you’re building a new home or an addition to your existing home, you’ll typically install new construction windows that are nailed directly to your wooden wall frames. Otherwise, you’ll install some type of retrofitted window.

If your windows are old and underperforming, you might consider full-frame replacement, which uses block-frame windows. If your frames are still in good shape, you can install pocket or insert window replacements with only sashes and glass. The price difference between the two is primarily in the labor: Insert replacement costs about $100–$300 per window, while full-frame replacement usually costs $150–$800 plus materials.

Window Brand

Top-rated window brands make products ranging from budget to high-end. Where a window falls within these price ranges depends most heavily on size and frame material. If you need a full replacement window, balance affordability with durability and energy efficiency. Fiberglass windows are highly energy-efficient and long-lasting but have a high price tag. Vinyl windows aren’t as high-performing as fiberglass but still offer durability and solid energy performance and make a good option for cheap window replacements.

---

Can You Replace Window Glass Yourself?

In some cases, you may be able to replace or repair broken window glass on your own. Here’s a look at both options.

DIY Window Glass Replacement

Slightly cracked or broken glass within a small, single-pane window can be a DIY-friendly project if you have some home improvement skills. You may be able to fix a cracked window with a bit of epoxy from Home Depot or Lowe’s.

For a fully broken wood-framed pane, check out our instructions for replacing a window pane yourself. You’ll need a putty knife, putty, heat gun, glazing points, and a painter’s tool, which will cost about $50–$75 in addition to the new window glass. The job is moderately difficult, but it should take less than a day, so you won’t need to leave your home open to the elements.

Professional Window Glass Replacement

It’s best to hire a professional for more complicated glass replacement in large or multipane windows. A window installation company can replace an entire window, but you may need to hire a glazier to replace an individual pane. You’ll pay for labor, but you’ll know the job’s been done properly and should get a labor warranty. The danger of DIYing window replacement is creating a leaky window seal that compromises the window’s energy efficiency. You also won’t get the full benefit of a multipane or gas-filled window unless you have it fixed by an expert.

One of our team members recently rode along with a professional Renewal by Andersen installation team to learn exactly what trained installers offer. A professional crew brings all the necessary equipment to protect your home, safely install and seal your windows, clean up the job site, and properly dispose of your old windows. See a step-by-step guide of what to expect during professional window installation.

---

How To Save on Window Glass Replacement Costs

• Even if you hire a pro, you can save on window glass replacement with the following tips.
• Choose standard glass over treated or customized varieties.
• Think long-term. Though you’ll pay more up-front for energy-efficient glass, you’ll save money on utility bills over time.
• Try to have several panes or windows replaced simultaneously since window installers often have a per-visit fee.
• Avoid calling for emergency services unless necessary, and schedule window replacement for the off-season when labor costs are lower.
• Get estimates from multiple professionals. We recommend getting quotes from at least three companies before making your choice.

---

Is Window Glass Replacement Worth It?

Though the national average for window glass replacement is $375, what you actually pay depends on how many panes need replacing, your chosen glass, the window’s size and design, and how much your contractor charges for labor. These variables can impact your final cost by hundreds of dollars. 
If the project is particularly costly or the damage is extensive, it may be time to replace the whole window. Window replacement costs more than glass repair or replacement, but upgrading to energy-efficient windows will reduce your utility bills and save you money on having to complete multiple repairs.

---

FAQs About Window Glass Replacement

Is it cheaper to just replace glass in windows?

Replacing glass within a window frame costs significantly less than replacing the entire window unit. The extent of window damage will determine whether you can do a glass-only replacement or a full window replacement. 

Can you replace window glass without replacing the frame?

You have two options for replacing window glass while leaving the frame intact. You can change the window entirely, complete with sashes and any opening mechanisms, with an insert replacement. You can also replace the individual glass panes.

How long does it take to replace a pane of glass in a window?

Replacement time varies based on the window’s size and complexity. Typically, it takes 2–3 hours to replace a pane of window glass.

What is the cost of replacing window glass?

The national average cost of replacing a single glass pane in a 30-inch-by-36-inch window is around $375.

---

Our Rating Methodology

We back up our window ratings and recommendations with a detailed rating methodology to objectively score each provider. We conduct research by speaking with company representatives, browsing product selections, analyzing window line specifications, and conducting focus groups and consumer surveys. We then score each provider against our review standards for window variety, value, trustworthiness and transparency, window features, and customer service to arrive at a final score on a 5-point rating scale. 

To share feedback or ask a question about this article, send a note to our Reviews Team at [email protected].