How To Repair a Fence Gate

A sagging or damaged fence gate can be an eyesore and a security risk. Repairing your fence gate is a manageable do-it-yourself (DIY) project that can improve your property’s appearance and privacy. In the video above, This Old House landscape contractor Roger Cook demonstrates how to repair a sagging fence gate and replace a missing picket.

Assessing the Damage of a Fence Gate

Inspect the gate carefully to pinpoint the source of the problem. A sagging gate may be due to loose hinges, a settling post, or a warped frame. Broken pickets or damaged hardware are usually more straightforward to address. Here are some common gate issues:

• Broken or missing pickets
• Misaligned latch
• Rotting wood
• Rusted or damaged hinges
• Sagging gate

Gathering Tools and Materials for a Fence Gate Repair

You’ll need the following equipment and materials to repair your fence gate:

• 3/16-inch drill bit
• Drill/driver
• Level
• Post hole digger (if replacing posts)
• Saw (if replacing pickets)
• Socket and hex-shank adapter
• Tape measure

• Concrete mix (for setting new posts)
• Deck screws
• Lag screws
• Pressure-treated lumber (for post-replacement)
• Replacement hinges (if needed)
• Replacement pickets (if needed)

Repairing or Replacing the Fence Gate Post

In the video above, Cook demonstrates how to replace a weak gate post with a more substantial one. First, you need to remove the old post. Dig around the existing post to expose it. Remove any concrete or soil surrounding the post and carefully extract the old post from the ground.

Installing a New Post

To install a new post, follow these steps:

1. Dig a hole approximately 30 inches deep for the new post.
2. Place the new 5×5 pressure-treated post in the hole.
3. Use a level to make sure the post is plumb.
4. Fill the hole with concrete, leaving the top 3 inches for soil.
5. Allow the concrete to set before attaching the gate.

Fixing a Sagging Fence Gate

A sagging gate is a common issue that can often be resolved without replacing the entire structure.

Tightening or Replacing Hinges

Hinges may get loose over time. Here’s how to tighten or replace them:

1. Remove the gate from the post by unscrewing the hinges.
2. Inspect the hinges for damage or wear.
3. If the hinges are in good condition, clean them and reattach them securely.
4. Replace damaged hinges with new, sturdy options.

Reinforcing the Gate Frame

To reinforce the gate frame, follow these steps: 

1. Lay the gate across two sawhorses for easy access.
2. Check the frame for any loose joints or warping.
3. Reinforce corners with metal brackets if necessary.
4. Add a diagonal brace from the top hinge side to the bottom latch side to prevent sagging.

Replacing Broken or Missing Pickets on a Fence Gate

Damaged pickets can compromise the appearance and security of your fence. Here’s how to replace them:

1. Remove the damaged picket by unscrewing it from the gate frame.
2. Measure and cut a new picket to match the existing ones.
3. Position the new picket in place, ensuring it’s level with adjacent pickets.
4. Secure the new picket to the gate frame using 1-and-5/8-inch deck screws.

Rehanging the Fence Gate

Once you’ve made the necessary repairs, it’s time to rehang your gate. Place a 2×4 on the ground to support the gate at the correct height. Position the gate in the opening, leaving a 1/2-inch gap between the gate and the fence post. Use a level to ensure the gate is vertical.

Next, attach the hinges. Mark the hinge positions on the post and drill pilot holes for the lag screws. Secure the hinges to the post using lag screws. Remove the supporting 2×4 and test the gate’s swing.

Installing or Adjusting the Latch on the Fence Gate

Select a latch that’s appropriate for your gate’s size and style. Position the latch on the gate, ensuring it aligns with the catch on the post. Mark the screw holes and drill pilot holes. Attach the latch to the gate using the provided screws and test it.

Latch options include the following:

• Bolt latch: This is the simplest and most cost-effective option. It fastens by sliding a bolt into or out of a catch.
• Gravity latch: This type of latch has a V-shaped catch on the fence with a strike plate across the opening. The gate features a latch arm that pushes the strike plate when the gate swings shut, which closes behind it. The strike plate features a tab that you push to release the latch arm when opening the gate.
• Spring-loaded latch: This is similar to the bolt latch with a rod that slides into and out of the catch, but the latch includes a spring that snaps the rod into place.

Maintaining Your Repaired Fence Gate

Regular maintenance can prevent future issues and extend the life of your fence gate. On a regular cadence, check for signs of rot or insect damage, wear or rust, and loose screws or bolts.

Apply a weather-resistant sealant or paint to protect wood components and lubricate hinges and latches periodically for smooth operation. Trim nearby vegetation to prevent moisture buildup on the gate.

Enhancing the Security of Your Fence Gate

Security is also worth considering when repairing your fence gate. Simple upgrades can improve the safety of your property. While latches are suitable for basic security, additional locks can provide a higher level of safety. Consider installing the following:

• Deadbolts for added strength
• Keypad locks for convenient access
• Padlocks to secure the latch

You could also install motion sensor lights around your gate to deter intruders and provide better visibility at night. Choose energy-efficient LED lights to minimize energy consumption.

Tools