If your towels and sheets are starting to feel less-than-fresh even after washing, laundry stripping might be the solution you need. This deep-cleaning method helps remove hidden grime buildup that regular washing might not. In this guide, we’ll explain how laundry stripping works, offer advice on when to use it, and provide tips for safe and effective stripping.
What Is Laundry Stripping?
Laundry stripping is an intensive soaking method for removing built-up residue from detergents, fabric softeners, and minerals in hard water. This process uses hot water and specific cleaning agents to break down and wash away stubborn buildup that regular washing may leave behind.
Why Is Laundry Stripping So Popular?
The rise in the popularity of laundry stripping can be attributed to several factors. Social media has played a significant role, with viral videos showcasing impressive before-and-after results. Many people are surprised to see the amount of dirt and grime released into the water during the stripping process, even from items they thought were clean. This visual impact, along with the promise of revitalized fabrics, has caught the attention of homeowners looking to improve their laundry routines.
In addition, the growing awareness of environmental and health concerns related to chemical buildup in fabrics has made many people more mindful of the products they use. Regular washing with different detergents and fabric softeners can leave residues that not only impact the longevity of the textiles but may also lead to skin irritation. Laundry stripping provides a way to reset these fabrics, ensuring they are safer and more comfortable for family use.
The Science Behind Laundry Stripping
Laundry stripping relies on a few specific ingredients, hot water, and chemical reactions to deep clean fabrics. The laundry stripping formula typically consists of three main components:
- Borax (sodium borate): Acts as a natural bleaching agent and helps brighten fabrics.
- Washing soda (sodium carbonate): Softens water and lifts oils and soils from fabrics.
- Powdered laundry detergent: Provides additional cleaning power without leaving behind the residue often associated with liquid detergents.
The hot water used in laundry stripping opens up fabric fibers, allowing the cleaning solution to penetrate deeply. The borax and washing soda work to break down mineral deposits and hard water buildup, while the detergent lifts away dirt and oils. This combination effectively strips away residue that can accumulate over time, leaving fabrics cleaner and often more absorbent.
The laundry stripping process’s success lies in its ability to tackle both organic and inorganic residues. While the detergent handles oils and grime, the borax and washing soda address mineral deposits, making it a comprehensive cleaning solution. This multifaceted approach removes even the deepest-set residues, providing a thorough clean.
When To Use Laundry Stripping
While laundry stripping can be effective, it may not be necessary or suitable for all items or situations.
Ideal Fabrics for Stripping
Laundry stripping is best suited for certain fabrics and items sturdy enough to withstand the intense stripping process and are more likely to benefit from deep cleaning.
- Cotton and cotton-blend sheets and towels
- Heavily used items that may accumulate residue over time
- Towels that have lost their absorbency
- White or light-colored fabrics that have become dingy
Fabrics to Avoid Stripping
Hot water and harsh chemicals used in the stripping process may damage certain fabrics. Avoid stripping the following items:
- Delicate fabrics like silk or wool
- Dark-colored items that may fade
- Synthetic materials like spandex or athletic wear
- Any items that require cold water washing
In addition, items with special finishes or coatings, such as water-repellent textiles, may lose their effectiveness after stripping. Before applying this method, always check the care labels and consult manufacturer guidelines if unsure about the suitability of laundry stripping for a particular fabric.
Supplies Needed for Laundry Stripping
You’ll need the following items for the stripping process:
- A large container (bathtub, sink, or top-loading washing machine)
- Borax
- Long-handled spoon for stirring
- Powdered laundry detergent
- Rubber gloves and long sleeves for protection
- Washing soda
For an average load, use a ratio of one part borax, one part washing soda, and two parts powdered detergent: 1/4 cup borax, 1/4 cup washing soda, and 1/2 cup detergent.
Powdered detergent is generally recommended for laundry stripping because it rinses out more cleanly and leaves less residue than liquid detergent. If you prefer using liquid detergent, make sure that it’s a low-residue formula, and be prepared to perform multiple rinse cycles to remove all traces of the detergent.
Step-by-Step Guide to Laundry Stripping
If you’ve decided to attempt laundry stripping, follow these steps for optimal results. Always remember to test a small, inconspicuous area first to check that the fabric can withstand the process.
Step 1: The Stripping Process
First, fill your chosen container with very hot water. Then:
- Add the borax, washing soda, and detergent, stirring until dissolved.
- Submerge clean, damp laundry items in the solution.
- Stir occasionally and let soak for 4-6 hours.
- The water may darken as residue is released from the fabrics.
Step 2: Rinsing and Drying
- Drain the dirty water and squeeze out excess from the items.
- Run the stripped items through a rinse cycle in your washing machine without detergent.
- Finally, dry the items as you normally would in a dryer or by air-drying.
For best results, avoid mixing different fabric types during the same stripping session. This guarantees that each item receives the appropriate level of care and reduces the risk of damage.
Potential Risks and Precautions when Laundry Stripping
While laundry stripping can be effective, it’s important to be aware of potential risks and take necessary precautions.
Health and Safety Precautions
Remember to take precautions when using laundry stripping chemicals, as they can be harsh. Borax, in particular, can cause skin and eye irritation. Always wear protective gear such as gloves and long sleeves when handling these chemicals. Maintain good ventilation in the stripping area and store the chemicals safely out of reach of children and pets.
Prolonged exposure to hot water and cleaning agents can also lead to skin dryness or irritation. It’s best to minimize direct contact with the stripping solution and thoroughly wash your hands afterward.
Environmental Considerations
Remember to be mindful of the environmental impact when doing laundry stripping due to the large amount of water and chemicals involved. If possible, consider reducing the stripping frequency and consider using eco-friendly alternatives. To prevent buildup and minimize the need for stripping, try using less detergent for your regular washes.
Dispose of the chemical-laden water properly/ Do not pour the solution directly into storm drains or natural water bodies. Instead, choose a method that properly treats and disposes of the wastewater.
Laundry Stripping Frequency
Laundry stripping shouldn’t be a regular practice. Once or twice a year is usually enough for heavily used items like towels and sheets. Overstripping can harm fabrics and remove the natural oils that protect their fibers.
Alternatives to Laundry Stripping
Those who prefer not to strip their laundry or want to reduce the frequency of stripping can try these alternative methods for keeping clothes and linens fresh and clean.
Laundry Techniques to Prevent Buildup
Try these tips to prevent buildup:
- Add an extra rinse cycle for heavily soiled items
- Avoid overloading your washing machine
- Opt for high-quality, low-residue detergents to maintain clothing cleanliness
- Clean your washing machine regularly to prevent residue transfer
- Use the correct amount of detergent for each load
Natural Methods for Refreshing Laundry
For a gentler approach to refreshing laundry, try these options:
- Add white vinegar to the rinse cycle to help remove odors and soften fabrics
- Dry clothes in the sun, which can naturally brighten and freshen fabrics
- Try adding essential oils to the rinse cycle
- Use baking soda as a natural fabric softener and deodorizer