Licensing information about third-party products included with HARFANG® 3D.

-------------------------------------------------------------------------------

I. Mentions -----------

This software is based in part on the work of the Independent JPEG Group.

Portions of this software are copyright © 2015 The FreeType Project

(www.freetype.org). All rights reserved.

stb_vorbis, stb_image.h and stb_image_write.h written by Sean Barrett.

Lua Copyright © 1994–2015 Lua.org, PUC-Rio.

LuaJIT is Copyright © 2005-2015 Mike Pall, released under the MIT open source

license.

Bullet Collision Detection and Physics Library Copyright (c) 2012 Advanced Micro

Devices, Inc. http://bulletphysics.org

libcurl is Copyright (c) 1996 - 2015, Daniel Stenberg, [email protected]. All

rights reserved.

Anti-Grain Geometry - Version 2.4 Copyright (C) 2002-2005 Maxim Shemanarev

(McSeem)

Recast is Copyright (c) 2009 Mikko Mononen [email protected]

Extended Module Player Lite Copyright (C) 1996-2014 Claudio Matsuoka and

Hipolito Carraro Jr

enet is Copyright (c) 2002-2015 Lee Salzman

TinyXML-2 is released under the zlib license.

unzip.h version 1.1, February 14h, 2010 Copyright (C) 1998-2010 Gilles Vollant

(minizip) ( http://www.winimage.com/zLibDll/minizip.html )

Modifications of Unzip for Zip64 Copyright (C) 2007-2008 Even Rouault

Modifications for Zip64 support on both zip and unzip Copyright (C) 2009-2010

Mathias Svensson ( http://result42.com )

rapidjson is Copyright (C) 2011 Milo Yip

googletest is Copyright 2008, Google Inc. All rights reserved.

zlib is (C) 1995-2013 Jean-loup Gailly and Mark Adler

libvpx is Copyright (c) 2010, The WebM Project authors. All rights reserved.

II. Licenses ------------

1. jpeglib

Independent JPEG Group License LEGAL ISSUES

In plain English:

1. We don't promise that this software works. (But if you find any bugs, please

let us know!) 2. You can use this software for whatever you want. You don't have

to pay us. 3. You may not pretend that you wrote this software. If you use it in

a program, you must acknowledge somewhere in your documentation that you've used

the IJG code.

In legalese:

The authors make NO WARRANTY or representation, either express or implied, with

respect to this software, its quality, accuracy, merchantability, or fitness for

a particular purpose. This software is provided "AS IS", and you, its user,

assume the entire risk as to its quality and accuracy.

This software is copyright (C) 1991-1998, Thomas G. Lane. All Rights Reserved

except as specified below.

Permission is hereby granted to use, copy, modify, and distribute this software

(or portions thereof) for any purpose, without fee, subject to these conditions:

(1) If any part of the source code for this software is distributed, then this

README file must be included, with this copyright and no-warranty notice

unaltered; and any additions, deletions, or changes to the original files must

be clearly indicated in accompanying documentation. (2) If only executable code

is distributed, then the accompanying documentation must state that "this

software is based in part on the work of the Independent JPEG Group". (3)

Permission for use of this software is granted only if the user accepts full

responsibility for any undesirable consequences; the authors accept NO LIABILITY

for damages of any kind.

These conditions apply to any software derived from or based on the IJG code,

not just to the unmodified library. If you use our work, you ought to

acknowledge us.

Permission is NOT granted for the use of any IJG author's name or company name

in advertising or publicity relating to this software or products derived from

it. This software may be referred to only as "the Independent JPEG Group's

software".

We specifically permit and encourage the use of this software as the basis of

commercial products, provided that all warranty or liability claims are assumed

by the product vendor.

ansi2knr.c is included in this distribution by permission of L. Peter Deutsch,

sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA.

ansi2knr.c is NOT covered by the above copyright and conditions, but instead by

the usual distribution terms of the Free Software Foundation; principally, that

you must include source code if you redistribute it. (See the file ansi2knr.c

for full details.) However, since ansi2knr.c is not needed as part of any

program generated from the IJG code, this does not limit you more than the

foregoing paragraphs do.

The Unix configuration script "configure" was produced with GNU Autoconf. It is

copyright by the Free Software Foundation but is freely distributable. The same

holds for its supporting scripts (config.guess, config.sub, ltconfig,

ltmain.sh). Another support script, install-sh, is copyright by M.I.T. but is

also freely distributable.

It appears that the arithmetic coding option of the JPEG spec is covered by

patents owned by IBM, AT&T, and Mitsubishi. Hence arithmetic coding cannot

legally be used without obtaining one or more licenses. For this reason, support

for arithmetic coding has been removed from the free JPEG software. (Since

arithmetic coding provides only a marginal gain over the unpatented Huffman

mode, it is unlikely that very many implementations will support it.) So far as

we are aware, there are no patent restrictions on the remaining code.

The IJG distribution formerly included code to read and write GIF files. To

avoid entanglement with the Unisys LZW patent, GIF reading support has been

removed altogether, and the GIF writer has been simplified to produce

"uncompressed GIFs". This technique does not use the LZW algorithm; the

resulting GIF files are larger than usual, but are readable by all standard GIF

decoders.

We are required to state that "The Graphics Interchange Format(c) is the

Copyright property of CompuServe Incorporated. GIF(sm) is a Service Mark

property of CompuServe Incorporated."

2. FreeType 2

The FreeType Project LICENSE ----------------------------

2006-Jan-27

Copyright 1996-2002, 2006 by

David Turner, Robert Wilhelm, and Werner Lemberg

Introduction ============

The FreeType Project is distributed in several archive packages; some of

them may contain, in addition to the FreeType font engine, various tools and

contributions which rely on, or relate to, the FreeType Project.

This license applies to all files found in such packages, and which do

not fall under their own explicit license. The license affects thus the

FreeType font engine, the test programs, documentation and makefiles, at

the very least.

This license was inspired by the BSD, Artistic, and IJG

(Independent JPEG Group) licenses, which all encourage inclusion and use of

free software in commercial and freeware products alike. As a

consequence, its main points are that:

o We don't promise that this software works. However, we will be

interested in any kind of bug reports. (`as is' distribution)

o You can use this software for whatever you want, in parts or

full form, without having to pay us. (`royalty-free' usage)

o You may not pretend that you wrote this software. If you use

it, or only parts of it, in a program, you must acknowledge somewhere

in your documentation that you have used the FreeType code.

(`credits')

We specifically permit and encourage the inclusion of this software,

with or without modifications, in commercial products. We disclaim all

warranties covering The FreeType Project and assume no liability related

to The FreeType Project.

Finally, many people asked us for a preferred form for a

credit/disclaimer to use in compliance with this license. We thus encourage

you to use the following text:

""" Portions of this software are copyright ? <year> The FreeType Project

(www.freetype.org). All rights reserved. """

Please replace <year> with the value from the FreeType version you actually

use.

Legal Terms ===========

0. Definitions --------------

Throughout this license, the terms `package', `FreeType Project', and

`FreeType archive' refer to the set of files originally distributed by

the authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the

`FreeType Project', be they named as alpha, beta or final release.

`You' refers to the licensee, or person using the project, where `using' is

a generic term including compiling the project's source code as well as

linking it to form a `program' or `executable'. This program is referred

to as `a program using the FreeType engine'.

This license applies to all files distributed in the original FreeType

Project, including all source code, binaries and documentation,

unless otherwise stated in the file in its original, unmodified form

as distributed in the original archive. If you are unsure whether or not a

particular file is covered by this license, you must contact us to verify

this.

The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert

Wilhelm, and Werner Lemberg. All rights reserved except as specified below.

1. No Warranty --------------

THE FREETYPE PROJECT IS PROVIDED `AS IS' WITHOUT WARRANTY OF ANY KIND,

EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL

ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED BY

THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.

2. Redistribution -----------------

This license grants a worldwide, royalty-free, perpetual and irrevocable

right and license to use, execute, perform, compile, display, copy,

create derivative works of, distribute and sublicense the FreeType

Project (in both source and object code forms) and derivative works

thereof for any purpose; and to authorize others to exercise some or all

of the rights granted herein, subject to the following conditions:

o Redistribution of source code must retain this license file

(`FTL.TXT') unaltered; any additions, deletions or changes to the

original files must be clearly indicated in accompanying documentation.

The copyright notices of the unaltered, original files must be

preserved in all copies of source files.

o Redistribution in binary form must provide a disclaimer that

states that the software is based in part of the work of the FreeType

Team, in the distribution documentation. We also encourage you to put

an URL to the FreeType web page in your documentation, though this isn't

mandatory.

These conditions apply to any software derived from or based on the

FreeType Project, not just the unmodified files. If you use our work, you

must acknowledge us. However, no fee need be paid to us.

3. Advertising --------------

Neither the FreeType authors and contributors nor you shall use the name of

the other for commercial, advertising, or promotional purposes without

specific prior written permission.

We suggest, but do not require, that you use one or more of the following

phrases to refer to this software in your documentation or advertising

materials: `FreeType Project', `FreeType Engine', `FreeType library', or

`FreeType Distribution'.

As you have not signed this license, you are not required to accept it.

However, as the FreeType Project is copyrighted material, only this

license, or another one contracted with the authors, grants you the right

to use, distribute, and modify it. Therefore, by using, distributing, or

modifying the FreeType Project, you indicate that you understand and accept

all the terms of this license.

4. Contacts -----------

There are two mailing lists related to FreeType:

o [email protected]

Discusses general use and applications of FreeType, as well as future and

wanted additions to the library and distribution. If you are looking

for support, start in this list if you haven't found anything to help

you in the documentation.

o [email protected]

Discusses bugs, as well as engine internals, design issues, specific

licenses, porting, etc.

Our home page can be found at

http://www.freetype.org

3. zlib.h

/* zlib.h -- interface of the 'zlib' general purpose compression library

version 1.2.8, April 28th, 2013

Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler

This software is provided 'as-is', without any express or implied warranty.

In no event will the authors be held liable for any damages arising from the

use of this software.

Permission is granted to anyone to use this software for any purpose,

including commercial applications, and to alter it and redistribute it freely,

subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not

claim that you wrote the original software. If you use this software in a

product, an acknowledgment in the product documentation would be

appreciated but is not required.

2. Altered source versions must be plainly marked as such, and must not be

misrepresented as being the original software.

3. This notice may not be removed or altered from any source distribution.

Jean-loup Gailly Mark Adler [email protected]

[email protected]

*/

4. stb_vorbis

// Written by Sean Barrett in 2007, last updated in 2014 // Sponsored by RAD

Game Tools. // // Placed in the public domain April 2007 by the author: no

copyright // is claimed, and you may use it for any purpose you like. // // No

warranty for any purpose is expressed or implied by the author (nor // by RAD

Game Tools). Report bugs and send enhancements to the author.

5. stb_image.h

/* stb_image - v2.06 - public domain image loader -

http://nothings.org/stb_image.h

no warranty implied; use at your own risk

*/

6. stb_image_write.h

/* stb_image_write - v0.98 - public domain -

http://nothings.org/stb/stb_image_write.h

writes out PNG/BMP/TGA images to C stdio - Sean Barrett 2010

no warranty implied; use at your own risk */

7. Lua

Copyright © 1994–2015 Lua.org, PUC-Rio. Permission is hereby granted, free of

charge, to any person obtaining a copy of this software and associated

documentation files (the "Software"), to deal in the Software without

restriction, including without limitation the rights to use, copy, modify,

merge, publish, distribute, sublicense, and/or sell copies of the Software, and

to permit persons to whom the Software is furnished to do so, subject to the

following conditions:

The above copyright notice and this permission notice shall be included in all

copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR

COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER

IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN

CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

8. LuaJIT

Copyright © 2005-2015 Mike Pall.

Permission is hereby granted, free of charge, to any person obtaining a copy of

this software and associated documentation files (the "Software"), to deal in

the Software without restriction, including without limitation the rights to

use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of

the Software, and to permit persons to whom the Software is furnished to do so,

subject to the following conditions:

The above copyright notice and this permission notice shall be included in all

copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR

COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER

IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN

CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

8. Bullet Physics SDK

Bullet Collision Detection and Physics Library Copyright (c) 2012 Advanced Micro

Devices, Inc. http://bulletphysics.org

This software is provided 'as-is', without any express or implied warranty. In

no event will the authors be held liable for any damages arising from the use of

this software. Permission is granted to anyone to use this software for any

purpose, including commercial applications, and to alter it and redistribute it

freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim

that you wrote the original software. If you use this software in a product, an

acknowledgment in the product documentation would be appreciated but is not

required. 2. Altered source versions must be plainly marked as such, and must

not be misrepresented as being the original software. 3. This notice may not be

removed or altered from any source distribution.

9. libcurl

Copyright (c) 1996 - 2015, Daniel Stenberg, [email protected]. All rights reserved.

Permission to use, copy, modify, and distribute this software for any purpose

with or without fee is hereby granted, provided that the above copyright notice

and this permission notice appear in all copies.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT

SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be

used in advertising or otherwise to promote the sale, use or other dealings in

this Software without prior written authorization of the copyright holder.

10. AGG 2.4

Anti-Grain Geometry - Version 2.4 Copyright (C) 2002-2005 Maxim Shemanarev

(McSeem)

Redistribution and use in source and binary forms, with or without modification,

are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3. The name of the author may not be used to endorse or promote

products derived from this software without specific prior written

permission.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT

SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT

OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING

IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY

OF SUCH DAMAGE.

11. Recast

Copyright (c) 2009 Mikko Mononen [email protected]

This software is provided 'as-is', without any express or implied warranty. In

no event will the authors be held liable for any damages arising from the use of

this software.

Permission is granted to anyone to use this software for any purpose, including

commercial applications, and to alter it and redistribute it freely, subject to

the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim

that you wrote the original software. If you use this software in a product, an

acknowledgment in the product documentation would be appreciated but is not

required. 2. Altered source versions must be plainly marked as such, and must

not be misrepresented as being the original software. 3. This notice may not be

removed or altered from any source distribution.

12. libxmp-lite

Extended Module Player Lite Copyright (C) 1996-2014 Claudio Matsuoka and

Hipolito Carraro Jr

Permission is hereby granted, free of charge, to any person obtaining a copy of

this software and associated documentation files (the "Software"), to deal in

the Software without restriction, including without limitation the rights to

use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of

the Software, and to permit persons to whom the Software is furnished to do so,

subject to the following conditions:

The above copyright notice and this permission notice shall be included in all

copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR

COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER

IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN

CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

13. enet

Copyright (c) 2002-2015 Lee Salzman

Permission is hereby granted, free of charge, to any person obtaining a copy of

this software and associated documentation files (the "Software"), to deal in

the Software without restriction, including without limitation the rights to

use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of

the Software, and to permit persons to whom the Software is furnished to do so,

subject to the following conditions:

The above copyright notice and this permission notice shall be included in all

copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR

COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER

IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN

CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

14. tinyXML-2

TinyXML-2 is released under the zlib license:

This software is provided 'as-is', without any express or implied warranty. In

no event will the authors be held liable for any damages arising from the use of

this software.

Permission is granted to anyone to use this software for any purpose, including

commercial applications, and to alter it and redistribute it freely, subject to

the following restrictions:

The origin of this software must not be misrepresented; you must not claim that

you wrote the original software. If you use this software in a product, an

acknowledgment in the product documentation would be appreciated but is not

required. Altered source versions must be plainly marked as such, and must not

be misrepresented as being the original software. This notice may not be removed

or altered from any source distribution.

15. unzip.h

/*

unzip.h -- IO for uncompress .zip files using zlib Version 1.1, February 14h,

2010 part of the MiniZip project - (

http://www.winimage.com/zLibDll/minizip.html )

Copyright (C) 1998-2010 Gilles Vollant (minizip) (

http://www.winimage.com/zLibDll/minizip.html )

Modifications of Unzip for Zip64 Copyright (C) 2007-2008 Even Rouault

Modifications for Zip64 support on both zip and unzip Copyright (C)

2009-2010 Mathias Svensson ( http://result42.com )

For more info read MiniZip_info.txt

---------------------------------------------------------------------------------

Condition of use and distribution are the same than zlib :

This software is provided 'as-is', without any express or implied warranty.

In no event will the authors be held liable for any damages arising from the

use of this software.

Permission is granted to anyone to use this software for any purpose,

including commercial applications, and to alter it and redistribute it freely,

subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not

claim that you wrote the original software. If you use this software in a

product, an acknowledgment in the product documentation would be

appreciated but is not required.

2. Altered source versions must be plainly marked as such, and must not be

misrepresented as being the original software.

3. This notice may not be removed or altered from any source distribution.

*/

16. rapidjson

Copyright (C) 2011 Milo Yip

Permission is hereby granted, free of charge, to any person obtaining a copy of

this software and associated documentation files (the "Software"), to deal in

the Software without restriction, including without limitation the rights to

use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of

the Software, and to permit persons to whom the Software is furnished to do so,

subject to the following conditions:

The above copyright notice and this permission notice shall be included in all

copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR

COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER

IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN

CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

17. googletest

Copyright 2008, Google Inc. All rights reserved.

Redistribution and use in source and binary forms, with or without modification,

are permitted provided that the following conditions are met:

* Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

* Redistributions in binary form must reproduce the above

copyright notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

* Neither the name of Google Inc. nor the names of its

contributors may be used to endorse or promote products derived from this

software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND

ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR

ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON

ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

18. libvpx

Copyright (c) 2010, The WebM Project authors. All rights reserved.

Redistribution and use in source and binary forms, with or without modification,

are permitted provided that the following conditions are met:

* Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

* Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

* Neither the name of Google, nor the WebM Project, nor the names

of its contributors may be used to endorse or promote products derived from

this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND

ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR

ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON

ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

19. MurmurV3

The MIT License

Copyright (c) 2008 Bryan McLemore, Chris Heald, Jorick Caberio

Permission is hereby granted, free of charge, to any person obtaining a copy

of this software and associated documentation files (the "Software"), to deal

in the Software without restriction, including without limitation the rights

to use, copy, modify, merge, publish, distribute, sublicense, and/or sell

copies of the Software, and to permit persons to whom the Software is

furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in

all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE

AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN

THE SOFTWARE.

20. xxHash

xxHash Library

Copyright (c) 2012-2014, Yann Collet

All rights reserved.

Redistribution and use in source and binary forms, with or without modification,

are permitted provided that the following conditions are met:

* Redistributions of source code must retain the above copyright notice, this

list of conditions and the following disclaimer.

* Redistributions in binary form must reproduce the above copyright notice, this

list of conditions and the following disclaimer in the documentation and/or

other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND

ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR

ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON

ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

21. meshoptimizer

MIT License

Copyright (c) 2016-2020 Arseny Kapoulkine

Permission is hereby granted, free of charge, to any person obtaining a copy of

this software and associated documentation files (the "Software"), to deal in

the Software without restriction, including without limitation the rights to

use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies

of the Software, and to permit persons to whom the Software is furnished to do

so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all

copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE

AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN

THE SOFTWARE.

III. FBX converter mentions ---------------------------

This software contains Autodesk® FBX® code developed by Autodesk, Inc. Copyright

2014 Autodesk, Inc. All rights, reserved. Such code is provided “as is” and

Autodesk, Inc. disclaims any and all warranties, whether express or implied,

including without limitation the implied warranties of merchantability, fitness

for a particular purpose or non-infringement of third party rights. In no event

shall Autodesk, Inc. be liable for any direct, indirect, incidental, special,

exemplary, or consequential damages (including, but not limited to, procurement

of substitute goods or services; loss of use, data, or profits; or business

interruption) however caused and on any theory of liability, whether in

contract, strict liability, or tort (including negligence or otherwise) arising

in any way out of such code.

IV. FBX converter licenses --------------------------

1. FBX SDK 2015

Autodesk LICENSE AND SERVICES AGREEMENT Autodesk® FBX® SDK 2015

READ CAREFULLY: AUTODESK LICENSES THE SOFTWARE AND OTHER LICENSED MATERIALS

ONLY ON THE CONDITION THAT LICENSEE ACCEPTS ALL OF THE TERMS CONTAINED OR

REFERENCED IN THIS AGREEMENT. By selecting the “I accept” button or other button

or mechanism designed to acknowledge agreement to the terms of an electronic

copy of this Agreement, or by installing, downloading, accessing, or otherwise

copying or using all or any portion of the Autodesk Materials, (i) you accept

this Agreement on behalf of the entity for which you are authorized to act

(e.g., an employer) and acknowledge that such entity is legally bound by this

Agreement (and you agree to act in a manner consistent with this Agreement) or,

if there is no such entity for which you are authorized to act, you accept this

Agreement on behalf of yourself as an individual and acknowledge that you are

legally bound by this Agreement, and (ii) you represent and warrant that you

have the right, power and authority to act on behalf of and bind such entity (if

any) or yourself. You may not accept this Agreement on behalf of another entity

unless you are an employee or other agent of such other entity with the right,

power and authority to act on behalf of such other entity. If Licensee is

unwilling to accept this Agreement, or you do not have the right, power and

authority to act on behalf of and bind such entity or yourself as an individual

(if there is no such entity), (a) DO NOT SELECT THE “I ACCEPT” BUTTON OR

OTHERWISE CLICK ON ANY BUTTON OR OTHER MECHANISM DESIGNED TO ACKNOWLEDGE

AGREEMENT, AND DO NOT INSTALL, DOWNLOAD, ACCESS, OR OTHERWISE COPY OR USE ALL OR

ANY PORTION OF THE AUTODESK MATERIALS; AND (b) WITHIN THIRTY (30) DAYS FROM THE

DATE OF ACQUIRING THE AUTODESK MATERIALS, LICENSEE MAY RETURN THE AUTODESK

MATERIALS (INCLUDING ANY COPIES) TO THE ENTITY FROM WHICH THEY WERE ACQUIRED FOR

A REFUND OF THE APPLICABLE LICENSE FEES PAID BY THE LICENSEE. The words

“Autodesk", “Agreement” and “Licensee” and other capitalized terms used in this

Agreement are defined terms. The definitions can be found in Exhibit A (if the

terms are not defined in the main body of the Agreement). 1. License 1.1 License

Grant. Subject to and conditioned on Licensee’s continuous compliance with this

Agreement, Autodesk grants Licensee a nonexclusive, nonsublicensable,

nontransferable, limited license to Install and Access the Licensed SDK and User

Documentation, in each case solely (a) in the Territory, (b) within the scope of

the License Type and Permitted Number specified in the applicable License

Identification, and (c) in accordance with the other terms of this Agreement,

to: 1.1.1       (a)    use the SDK for development, research, internal,

educational, or commercial purposes: (i) to create a software product with the

capability to read and/or write and/or translate Licensee files, which software

product links to the Library (“Developed Software”); and/or (ii) to modify the

Sample Code(s) solely to create an object code version(s) (“Modified Code(s)”);

and/or (b)     reproduce the Library to link to the Developed Software.

1.1.2      (a)     incorporate the executable version of the Developed Software

into; and/or (b)     incorporate the Modified Code(s) into; and/or (c)     link

the Library, in binary code form to; software products developed by Licensee

(“Licensee Product(s)”) for Licensee’s Internal Business Needs.

1.1.3   reproduce, distribute and sublicense free of charge or for a fee

Licensee Product(s) provided that Licensee must sublicense the Software, the

Developed Software, the Library, the Sample Code(s) and the Modified Code(s) “as

is”, without warranty of any kind. Various License Types are described in

Exhibit B. In any case where the License Identification does not specify a

License Type or Permitted Number or Territory, or there is no License

Identification, the License Type will, by default, be the Stand-alone

(Individual) License and the Territory will be worldwide, subject to the Export

Control requirements herein. 1.1.4       Licensee shall reproduce and apply any

copyright or other proprietary rights notices included on or embedded in the

Software, or any part thereof, to any copies of the Software or any part

thereof, or to the Developed Software, in any form. 1.1.5       Licensee shall

place the following statement in the copyright area of either: (i) the end-user

License and/or terms of use for the Developed Software; or (ii) the ‘About Box’

or similar notice page of the Developed Software; and Licensee shall also

include the following statement in the copyright area of either: (a) the on-line

documentation regarding the Developed Software; or (b) any other document

related to Developed Software that contains copyright information:“This software

contains Autodesk® FBX® code developed by Autodesk, Inc. Copyright 2014

Autodesk, Inc. All rights, reserved. Such code is provided “as is” and Autodesk,

Inc. disclaims any and all warranties, whether express or implied, including

without limitation the implied warranties of merchantability, fitness for a

particular purpose or non-infringement of third party rights. In no event shall

Autodesk, Inc. be liable for any direct, indirect, incidental, special,

exemplary, or consequential damages (including, but not limited to, procurement

of substitute goods or services; loss of use, data, or profits; or business

interruption) however caused and on any theory of liability, whether in

contract, strict liability, or tort (including negligence or otherwise) arising

in any way out of such code.”1.2 Upgrades and Previous Versions. 1.2.1 Effect of

Upgrades. If Autodesk or a Reseller provides Licensee with an Upgrade to other

Licensed Materials previously licensed to Licensee, the Licensed Materials

previously licensed to Licensee and any other Autodesk Materials relating

thereto will thereafter be deemed to be a “Previous Version.” Except as set

forth in Section 1.2.2 (Exception for Relationship Program Licensees), the

license grant and other rights with respect to any Previous Version will

terminate one hundred twenty (120) days after Installation of the Upgrade.

Within such one hundred twenty (120) day period, except as set forth in Section

1.2.2 (Exception for Relationship Program Licensees), (a) Licensee must cease

all use of any Previous Version and Uninstall all copies of the Previous

Version, and (b) upon expiration of such period, such Previous Version will no

longer constitute Licensed Materials but rather will be deemed to be Excluded

Materials and Licensee will no longer have a license for any such Previous

Version. At Autodesk’s request, Licensee agrees to destroy or return to

Autodesk or the Reseller from which they were acquired all copies of the

Previous Version. Autodesk reserves the right to require Licensee to show

satisfactory proof that all copies of any Previous Version have been Uninstalled

and, if so requested by Autodesk, destroyed or returned to Autodesk or the

Reseller from which they were acquired. 1.2.2 Exception for Relationship Program

Licensees. The termination of rights as to Previous Versions described in

Section 1.2.1 (Effect of Upgrades) may not apply to Licensee if and to the

extent (a) Licensee participates in a Relationship Program and the Relationship

Program Terms authorize Licensee to retain such Previous Versions or (b)

otherwise authorized in writing by Autodesk. 1.3 Additional Terms. The Licensed

Materials (or portions thereof) may be subject to terms (e.g., terms

accompanying such Licensed Materials or made available in connection with

ordering, installing, downloading, accessing, using or copying such Licensed

Materials) that are in addition to or different from the terms set forth in this

Agreement, and Licensee agrees to comply with such terms. 1.4 Other Materials.

If Autodesk provides or makes available to Licensee any additional materials

associated with the Licensed Materials, including any corrections, patches,

service packs, updates or upgrades to, or new versions of, the Licensed

Materials (including Upgrades) or any Supplemental Materials or User

Documentation for the Licensed Materials, (a) such additional materials may

include or be subject to other terms in addition to or different from the terms

set forth in this Agreement (including, without limitation, additional or

different fees, license terms, or restrictions on use), and Licensee agrees to

comply with such terms, or (b) if there are no other terms for such additional

materials, they will (except as otherwise provided by Section 1.2 (Upgrades and

Previous Versions)) be subject to the same terms (including, without limitation,

the licenses, applicable License Type and Permitted Number, and other terms of

this Agreement) as the Licensed Materials to which such additional materials

apply. In no event will the foregoing result in any rights with respect to

Excluded Materials. 1.5 Authorized Users. Licensee may permit the Licensed

Materials to be Installed and/or Accessed only by Licensee’s Personnel (except

as otherwise designated in the applicable License Type), and any such

Installation or Access will be subject to any other requirements imposed by this

Agreement and the applicable License Type and Permitted Number. Licensee will

be responsible for compliance with this Agreement by Licensee’s Personnel and

any other persons who may have Access to the Autodesk Materials through Licensee

(whether or not such Access is authorized by Autodesk or within the scope of the

applicable License Type and Permitted Number). 1.6 Third-Party Licensed

Materials. The Autodesk Materials may contain or be accompanied by third-party

software, data or other materials that are subject to and provided in accordance

with terms that are in addition to or different from the terms set forth in this

Agreement. Such terms may be included or referenced in or with such third-party

software, data or other materials (e.g., in the “About box”) or a web page

specified by Autodesk (the URL for which may be obtained on Autodesk’s website

or on request to Autodesk). Licensee agrees to comply with such terms. In

addition, Licensee will take sole responsibility for obtaining and complying

with any licenses that may be necessary to use third-party software, data or

other materials that Licensee uses or obtains for use in conjunction with the

Licensed Materials. Licensee acknowledges and agrees that Autodesk has no

responsibility for, and makes no representations or warranties regarding, such

third-party software, data or other materials or Licensee’s use of such

third-party software, data or other materials. 1.7 Relationship Programs.

Autodesk may offer to Licensee, and (if so) Licensee may participate in one (1)

or more Relationship Programs applicable to the Licensed Materials licensed to

Licensee under this Agreement (and such Relationship Programs may include rights

in addition to or different from those set forth in this Agreement). Any

Relationship Programs are subject to Autodesk’s terms therefor, which terms are

set forth in the applicable Relationship Program Terms. Licensee agrees that if

it requests, accepts, or makes use of any Relationship Program, Licensee will be

bound by such terms, as they may be modified from time to time in accordance

with the applicable Relationship Program Terms (and such terms, as so modified

from time to time, are a part of and incorporated by reference into this

Agreement), and Licensee agrees to comply with such terms. Licensee

acknowledges that Autodesk may require a further acceptance of such terms as a

condition to participation in a Relationship Program. 1.8 Services. Autodesk

may provide, and Licensee may elect to receive or benefit from, certain Services

from time to time. Any Services are subject to Autodesk’s terms therefor, which

terms are set forth in the applicable Services Terms. Licensee agrees that if

it requests, accepts, or makes use of any Services, Licensee will be bound by

such terms, as they may be modified from time to time in accordance with the

applicable Services Terms (and such terms, as so modified from time to time, are

a part of and incorporated by reference into this Agreement), and Licensee

agrees to comply with such terms. Licensee acknowledges that Autodesk may

require a further acceptance of such terms as a condition to providing Services.

1.9 Archival Copy. Licensee’s license under Section 1.1 (License Grant)

includes the right to make a single archival copy of the Licensed Materials in

the Territory, provided that (a) the single-copy limitation will not apply to

copies made as an incidental part of a routine backup of Licensee’s entire

computer system on which the Licensed Materials are Installed in accordance with

this Agreement, where such backup includes the making of copies of substantially

all other software on such computer system and (b) any archival copy may be

Accessed or Installed (other than on a backup storage medium from which the

Licensed Materials cannot be Accessed) only when and for so long as the primary

copy of the Licensed Materials is inaccessible and inoperable. Copies of the

Licensed Materials that are Installed and are in excess of the Permitted Number

at any time while the primary copy of the Licensed Materials is also Accessible

are not "archival copies" as permitted under this Section 1.9 (Archival Copy).

1.10 Nature of Licenses. Licensee acknowledges and agrees that when Licensee

acquires a license of Licensed Materials, (including through a Relationship

Program or Services), Licensee’s acquisition is neither contingent on the

delivery of any future features or functionality nor subject to any public or

other comments (oral, written or otherwise) made by Autodesk regarding future

features or functionality. 1.11 Feedback. Licensee hereby grants Autodesk, under

all of Licensee’s intellectual property and proprietary rights, the following

worldwide, exclusive, transferable, perpetual, irrevocable, royalty-free, fully

paid-up rights: (1) to make, have made, use, copy, modify, and create derivative

works of the Feedback as part of or in connection with any Autodesk product,

technology, service, content, material, specification or documentation

(including without limitation in connection with the marketing or sale thereof);

(2) to publicly perform or display, import, broadcast, transmit, distribute,

license, offer to sell and sell, rent, lease or lend copies of the Feedback (and

derivative works thereof and improvements thereon); and (3) to sublicense to

third parties the foregoing rights, including the right to sublicense to further

third parties. “Feedback” shall mean all suggestions, comments, input, ideas,

reports, information or know-how (whether in oral or written form) provided by

Licensee to Autodesk or an Autodesk affiliate in connection with Licensee’s

evaluation of or use of the Licensed Materials. Feedback does not include any

artwork or sample content created by Licensee using the Licensed Materials. 2.

License Limitations; Prohibitions 2.1 Limitations and Exclusions. 2.1.1 No

License Granted; Unauthorized Activities. The parties acknowledge and agree

that, notwithstanding anything to the contrary in this Agreement, no license is

granted (whether expressly, by implication or otherwise) under this Agreement

(and this Agreement expressly excludes any right) (a) to Excluded Materials, (b)

to any Autodesk Materials that Licensee did not acquire lawfully or that

Licensee acquired in violation of or in a manner inconsistent with this

Agreement, (c) for Installation of or Access to the Licensed Materials beyond

the applicable license term (whether a fixed term or Relationship Program period

or term) or outside the scope of the applicable License Type or Permitted

Number, (d) for Installation of the Licensed Materials on any Computer other

than a Computer owned or leased, and controlled, by Licensee, unless otherwise

authorized in writing by Autodesk, (e) to distribute, rent, loan, lease, sell,

sublicense, transfer or otherwise provide all or any portion of the Autodesk

Materials to any person or entity except as expressly set forth in this

Agreement or as expressly authorized in writing by Autodesk, (f) to provide or

make available any features or functionality of the Autodesk Materials to any

person or entity (other than to and for Licensee itself for the purpose

specified in the applicable License Type), whether or not over a network and

whether or not on a hosted basis, (g) except as otherwise expressly provided

with respect to a specific License Type, to Install or Access or allow the

Installation of or Access to the Autodesk Materials over the Internet or other

non-local network, including, without limitation, use in connection with a wide

area network (WAN), virtual private network (VPN), virtualization, Web hosting,

time-sharing, service bureau, software as a service, cloud or other service or

technology, (h) to remove, alter or obscure any proprietary notices, labels or

marks in the Autodesk Materials, (i) to decompile, disassemble or otherwise

reverse engineer the Autodesk Materials, or (j) to translate, adapt, arrange, or

create derivative works based on, or otherwise modify the Autodesk Materials for

any purpose. 2.1.2 Licensed Materials as a Single Product. The Licensed

Materials are licensed to Licensee as a single product and the applicable

components may not be separated for Installation or Access (and all such

components must be Installed and Accessed on the same Computer except as

authorized in writing by Autodesk). 2.1.3 Territory. Except as otherwise

authorized in writing by Autodesk, the licenses granted in this Agreement are

granted only for the Territory. Nothing in this Agreement permits Licensee

(including, without limitation, Licensee’s Personnel, if any) to Install or

Access the Licensed Materials outside of the Territory. 2.1.4 Effect of

Unauthorized Use. Licensee will not engage in, and will not permit or assist

any third party to engage in any of the uses or activities prohibited (or any

uses or activities inconsistent with the limitations described) in this Section

2.1 (Limitations and Exclusions) (collectively, “Unauthorized Uses”). Any such

Unauthorized Use, and any Installation of or Access to the Licensed Materials

provided under this Agreement, outside of the scope of the applicable license

grants (including, without limitation, outside the applicable License Type

and/or Permitted Number) or otherwise not in accordance with this Agreement,

constitute or result in infringement of Autodesk’s intellectual property rights

as well as a breach of this Agreement. Licensee will notify Autodesk promptly

of any such Unauthorized Uses or other unauthorized Installation or Access.

2.1.5 Use of Open Source Software by Licensee.  If Licensee uses any third party

software (including free or Open Source Software), whether or not in conjunction

with the Software, Licensee shall ensure that its use does not: (i) create, or

purport to create, obligations of Autodesk or any of its affiliates with respect

to the Software; (ii) grant, or purport to grant, to any third party any rights

to or immunities under Autodesk’s or any of its affiliates intellectual property

rights; or (iii) cause the Software to be subject to any licensing terms other

than those set forth in this Agreement. 2.2 Circumvention. 2.2.1 Licensee may

not (i) utilize any equipment, device, software, or other means to (or designed

to) circumvent or remove any form of technical protection used by Autodesk in

connection with the Autodesk Materials, or (ii) Install or Access the Autodesk

Materials with any product code, authorization code, serial number, or other

copy-protection device not supplied by Autodesk directly or through a Reseller.

Without limitation of the generality of the foregoing, Licensee may not utilize

any equipment, device, software, or other means to (or designed to) circumvent

or remove the Autodesk License Manager or any tool or technical protection

measure provided or made available by Autodesk for managing, monitoring or

controlling Installation of or Access to Autodesk Materials. 2.2.2 Licensee may

not utilize any equipment, device, software, or other means to (or designed to)

circumvent or remove any usage restrictions, or to enable functionality disabled