A simpler version, or subset, of something (especially software), in which complexity is forgone for the sake of easier application (or modified application); for example:
Crippleware, software that purposely has some functions removed
WLZW (or Lite 98.7) is an Adult Contemporary radio station in Utica, New York. Broadcasting on 98.7 MHz, the station is owned by Townsquare Media as part of a cluster with news-talk station WIBX, country-formatted WFRG, and classic hits station WODZ.
History
The station signed on the air on January 1, 1974 as a sister station to WIBX and ran a beautiful music format under the call letters WIBQ. The station abruptly changed format in 1985 to classic hits as "Z 98.7" with the call letters WNYZ. After a while in the format, WNYZ next flipped to a rock-leaning Top 40 format, identifying as "New York's Z-98.7". The format began with Twisted Sister's We're Not Gonna Take It, followed by Quiet Riot's Cum On Feel the Noize. The Top 40 format could not, however, compete against powerhouse Top 40 station Power Hits Rock 107 (WRCK), and in 1989 the station again changed format. Originally the station planned to join the 'Z-Rock' satellite Heavy Metal format available at the time, but instead flipped to their current format of hot AC and current callsign WLZW, identifying as "Lite 98.7".
MARRS (stylised M|A|R|R|S) was a 1987 one-off recording act formed by the groups A.R. Kane and Colourbox, which only released one commercial disc. It became "a one-hit wonder of rare influence" because of their international hit "Pump Up the Volume", and nominated for a Grammy Award in 1989.
History
MARRS started in 1987 as a collaboration between the groups A.R. Kane and Colourbox, with additional input from DJs Chris "C.J." Mackintosh, Dave Dorrell . The result was that instead of working together, the two groups ended up recording a track each, then turning it over to the other for additional input.
Of the two pieces completed, one, "Anitina," was an A.R. Kane track with drum programming by Colourbox's Steve Young. The other, "Pump Up the Volume", was a propulsive Martyn Young track constructed largely of samples, including one of A.R. Kane's guitars.
The record was released under the alias MARRS, an acronym derived from the forenames of the five 4AD artists involved in the project: Martyn Young (from Colourbox), Alex Ayuli and Rudy Tambala (from A.R. Kane), Russell Smith (an associate A.R. Kane member and founder of Terminal Cheesecake), and Steve Young (from Colourbox).
ARC is a losslessdata compression and archivalformat by System Enhancement Associates (SEA). It was very popular during the early days of networked dial-up BBS. The file format and the program were both called ARC. The ARC program made obsolete the previous use of a combination of the SQ program to compress files and the LU program to create .LBR archives, by combining both compression and archiving functions into a single program. Unlike ZIP, ARC is incapable of compressing entire directory trees. The format was subject to controversy in the 1980s—an important event in debates over what would later be known as open formats.
The .arcfile extension is often used for several file archive-like file types. For example, the Internet Archive uses its own ARC format to store multiple web resources into a single file. The FreeArc archiver also uses .arc extension, but uses a completely different file format.
Nintendo uses an unrelated 'ARC' format for resources, such as MIDI, voice samples, or text, in GameCube and Wii games. Several unofficial extractors exist for this type of ARC file.
A (simple) arc in finite projective geometry is a set of points which satisfies, in an intuitive way, a feature of curved figures in continuous geometries. Loosely speaking, they are sets of points that are far from "line-like" in a plane or far from "plane-like" in a three-dimensional space. In this finite setting it is typical to include the number of points in the set in the name, so these simple arcs are called k-arcs. An important generalization of the k-arc concept, also referred to as arcs in the literature, are the (k, d)-arcs.
k-arcs in a projective plane
In a finite projective planeπ (not necessarily Desarguesian) a set A of k (k ≥ 3) points such that no three points of A are collinear (on a line) is called a k - arc. If the plane π has order q then k ≤ q + 2, however the maximum value of k can only be achieved if q is even. In a plane of order q, a (q + 1)-arc is called an oval and, if q is even, a (q + 2)-arc is called a hyperoval.
Every conic in the Desarguesian projective plane PG(2,q), i.e., the set of zeros of an irreducible homogeneous quadratic equation, is an oval. A celebrated result of Beniamino Segre states that when q is odd, every (q + 1)-arc in PG(2,q) is a conic. This is one of the pioneering results in finite geometry.
Top 5 Dangerous Short Circuit Videos (What Went Wrong?)
How does Electrical Fire happen?
A high current fault can create an electrical fire by forming a high energy arc flash which rapidly vaporizes metal and insulation material. An electrical explosion is the sudden release of energy due to a short circuit between power phases or a phase to ground. It is important to realize that a very large amount of energy is available on the bus of most electrical panels when they are operating within their normal design parameters. For example a phase to phase short circuit on a 400 Amp, 120/208 Volt panel can instantaneously release over 100 kilowatts of energy during a fault condition and not blow the protective fuse or circuit breaker. An electrical explosion of this magnitude will destroy the panel and can start a fire causing severe injuries.
In si...
How does Electrical Fire happen?
A high current fault can create an electrical fire by forming a high energy arc flash which rapidly vaporizes metal and insula...
How does Electrical Fire happen?
A high current fault can create an electrical fire by forming a high energy arc flash which rapidly vaporizes metal and insulation material. An electrical explosion is the sudden release of energy due to a short circuit between power phases or a phase to ground. It is important to realize that a very large amount of energy is available on the bus of most electrical panels when they are operating within their normal design parameters. For example a phase to phase short circuit on a 400 Amp, 120/208 Volt panel can instantaneously release over 100 kilowatts of energy during a fault condition and not blow the protective fuse or circuit breaker. An electrical explosion of this magnitude will destroy the panel and can start a fire causing severe injuries.
In simple terms a short circuit is a low resistance path for an electric current to flow between two conductors supplying electrical power. Since the volume of current flow is huge this may cause the electrical power source to get damaged, sometimes permanently. If ever we have a fuse in the circuit it will act as a protection device and blow out thus opening the circuit and preventing any further damage.
Join 'Engineering World' like many others to get access to very special perks:
https://www.youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/join
Also, kindly consider subscribing to our channel if you liked the video: https://geni.us/SubscribeChannel
Watch some of our other interesting videos:
Are Wind Turbines really Environmentally Friendly?
Link: https://youtu.be/MVHzfUWul2Y
Which is the best seaplane ever made?
Link: https://youtu.be/XNQ9hnJMiY8
Can SpaceX rockets really land from the space?
Link: https://youtu.be/aH9JQ4Kash0
How does Electrical Fire happen?
A high current fault can create an electrical fire by forming a high energy arc flash which rapidly vaporizes metal and insulation material. An electrical explosion is the sudden release of energy due to a short circuit between power phases or a phase to ground. It is important to realize that a very large amount of energy is available on the bus of most electrical panels when they are operating within their normal design parameters. For example a phase to phase short circuit on a 400 Amp, 120/208 Volt panel can instantaneously release over 100 kilowatts of energy during a fault condition and not blow the protective fuse or circuit breaker. An electrical explosion of this magnitude will destroy the panel and can start a fire causing severe injuries.
In simple terms a short circuit is a low resistance path for an electric current to flow between two conductors supplying electrical power. Since the volume of current flow is huge this may cause the electrical power source to get damaged, sometimes permanently. If ever we have a fuse in the circuit it will act as a protection device and blow out thus opening the circuit and preventing any further damage.
Join 'Engineering World' like many others to get access to very special perks:
https://www.youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/join
Also, kindly consider subscribing to our channel if you liked the video: https://geni.us/SubscribeChannel
Watch some of our other interesting videos:
Are Wind Turbines really Environmentally Friendly?
Link: https://youtu.be/MVHzfUWul2Y
Which is the best seaplane ever made?
Link: https://youtu.be/XNQ9hnJMiY8
Can SpaceX rockets really land from the space?
Link: https://youtu.be/aH9JQ4Kash0
How does Electrical Fire happen?
A high current fault can create an electrical fire by forming a high energy arc flash which rapidly vaporizes metal and insulation material. An electrical explosion is the sudden release of energy due to a short circuit between power phases or a phase to ground. It is important to realize that a very large amount of energy is available on the bus of most electrical panels when they are operating within their normal design parameters. For example a phase to phase short circuit on a 400 Amp, 120/208 Volt panel can instantaneously release over 100 kilowatts of energy during a fault condition and not blow the protective fuse or circuit breaker. An electrical explosion of this magnitude will destroy the panel and can start a fire causing severe injuries.
In simple terms a short circuit is a low resistance path for an electric current to flow between two conductors supplying electrical power. Since the volume of current flow is huge this may cause the electrical power source to get damaged, sometimes permanently. If ever we have a fuse in the circuit it will act as a protection device and blow out thus opening the circuit and preventing any further damage.
Join 'Engineering World' like many others to get access to very special perks:
https://www.youtube.com/channel/UCh2wZoBynUkHmTX2GOwAKKg/join
Also, kindly consider subscribing to our channel if you liked the video: https://geni.us/SubscribeChannel
Watch some of our other interesting videos:
Are Wind Turbines really Environmentally Friendly?
Link: https://youtu.be/MVHzfUWul2Y
Which is the best seaplane ever made?
Link: https://youtu.be/XNQ9hnJMiY8
Can SpaceX rockets really land from the space?
Link: https://youtu.be/aH9JQ4Kash0
'
weather_info += '