Welcome to the Lucky65v2 firmware refresh tutorial. This guide will walk you through the process of updating your keyboard’s firmware to address known issues, such as RGB effect glitches and double-click problems. This update is designed to improve the overall performance and stability of your Lucky65v2.

Important Warning

Before proceeding, please understand that firmware updates carry inherent risks. If your Lucky65v2 is functioning correctly and you are not experiencing any of the aforementioned issues, it is strongly recommended that you do not perform this update. Incorrect firmware installation can potentially lead to keyboard malfunction, and in rare cases, require advanced troubleshooting or even hardware replacement. Proceed with caution and only if necessary.

Step 1: Get Ready for the Process

Before you begin the firmware refresh, ensure you have everything prepared:

Download the Required Software and Firmware:

• Visit the our firmware &software page: here
• Download the latest Lucky65v2 firmware and the corresponding software from this page.

Connect Your Keyboard:

• Connect your Lucky65v2 keyboard to your Windows computer using a USB cable. The keyboard can be in any mode (wired, Bluetooth, or 2.4GHz).

Windows Compatibility:

• Please note that the firmware update software is compatible with Windows operating systems only. Ensure you are using a Windows computer for this process.

Step 2: Install Software and Initiate Firmware Flash

• Execute the downloaded software. A driver installation prompt will appear; confirm by clicking “YES” and allow the installation to proceed. Visual aids (images) are provided below for reference during this process.

• Once the software installation concludes, locate and click the “OPEN” button within the software’s interface. This action will prompt you to select and load the firmware file you downloaded in Step 1.

• Crucially, before initiating the firmware flash, hold down the “ESC” key on your Lucky65v2 keyboard.While continuing to hold “ESC,” click the “FLASH” button within the software. This will begin the firmware update process.

• Wait patiently until the firmware flashing process is complete. Do not disconnect the keyboard or close the software during this time. The software will indicate when the update is finished.

You have now successfully updated the firmware on your Lucky65v2 keyboard. This process should resolve the reported RGB effect and double-click issues, enhancing your keyboard’s overall functionality. Remember, firmware updates should only be performed when necessary. If your keyboard was working without problems, this update might not have been required.

As always, please exercise caution when updating firmware, and ensure you follow the steps carefully. If you encounter any difficulties or have further questions, please consult our support resources on the Weikav website or contact our customer service team. Thank you for choosing Weikav.