To prevent workers from being injured due to falls from various types of ladders, including extension ladders and stepladders, employers are encouraged to adopt the following practices:

Safe Extension Ladder Use—DO:

  • Maintain a 3-point contact (two hands and a foot, or two feet and a hand) when climbing/descending a ladder.
  • Face the ladder when climbing or descending.
  • Keep the body inside the side rails.
  • Use extra care when getting on or off the ladder at the top or bottom.
  • Avoid tipping the ladder over sideways or causing the ladder base to slide out.
  • Carry tools in a tool belt or raise tools up using a hand line.  Never carry tools in your hands while climbing up/down a ladder.
  • Extend the top of the ladder three feet above the landing.
  • Keep ladders free of any slippery materials.

Safe Extension Ladder Use—DON’T:

  • Place a ladder on boxes, barrels, or unstable bases.
  • Use a ladder on soft ground or unstable footing.
  • Exceed the ladder’s maximum load rating.
  • Tie two ladders together to make them longer.
  • Ignore nearby overhead power lines.
  • Move or shift a ladder with a person or equipment on the ladder.
  • Lean out beyond the ladder’s side rails.
  • Use an extension ladder horizontally like a platform.

Safe Stepladder Use—DO:

  • Read and follow all the manufacturer’s instructions and labels on the stepladder.
  • Look for overhead power lines before handling or climbing a ladder.
  • Maintain a 3-point contact (two hands and a foot, or two feet and a hand) when climbing/descending a ladder.
  • Stay near the middle of the ladder and face the ladder while climbing up/down.
  • Use a barricade to keep traffic away from the ladder.
  • Keep ladders free of any slippery materials.
  • Only put ladders on a stable and level surface that is not slippery.

Safe Stepladder Use—DON’T:

  • Use stepladders for a purpose other than that for which they were designed.
  • Use a stepladder with spreaders unlocked.
  • Use the top step or cap as a step.
  • Place a ladder on boxes, barrels or other unstable bases.
  • Move or shift a ladder with a person or equipment on the ladder.
  • Use cross bracing on the rear of stepladders for climbing.
  • Paint a ladder with opaque coatings.
  • Use a damaged ladder.
  • Leave tools/materials/equipment on stepladder.
  • Use a stepladder horizontally like a platform.
  • Use a metal stepladder near power lines or electrical equipment.

For more information, see the OSHA Safe Use of Extension Ladders – Fact Sheet or the OSHA Safe Use of Stepladders – Fact Sheet.