DIY Raised Garden Bed Cover to Protect Raised Garden Beds from Animals

Want to learn how to make a raised garden bed cover with hinges to protect your precious raised garden beds from animals? This DIY garden bed cover with fence is perfect for you! It is a beginner friendly project that you can tackle over a weekend, as it doesn’t require fancy tools or skills. At the end, you’ll have a garden bed fence that perfectly sized for your raised bed.

For more DIY tips and ideas, be sure to follow me on Instagram!

Why do you need a garden bed cover for your raised bed?

In general, protective covers for raised garden beds are a great idea for gardeners looking for a way to protect their plants from harsh temperatures, pests, and other environmental factors. There are a variety of garden bed cover ideas to choose from, ranging from plastic covers to mesh covers, depending on the needs of the gardener.

It serves as a garden cage to keep your crops in and keep the animals out. For me, the biggest reason behind my DIY raised garden bed covers project is to protect my garden bed from animals so our plants can stay alive and thrive.

When I first started my vegetable garden on my two raised beds, I didn’t know the importance of having a protective cover for my garden beds. Soon enough, I noticed a lot of my seedlings and vegetables got chewed up down to the ground.

It took me a while to figure out it was the squirrels who ate up all of our vegetable crop.

At first, I was lazy and tried several ineffective ways to repel the squirrels, such as spraying chili water over my plants, and adding an owl statue. But none of them worked!

So I was determined to get a garden bed cover to win this war with squirrels for good, and I built this DIY garden bed cover with hinged doors. And since then, I haven’t had to worry about any pesky animals in my garden again. Woohoo!

My vegetables are thriving, no more loss of leaves or seedlings! Now I can grow whatever vegetables and fruits I like without worrying if squirrels like them as well.

This DIY garden bed cover will work for other animals as well, such as raccoons, deer, and others.

How to make a raised garden bed cover with hinges video tutorial

If you are a visual learner, I made a 5-minute video on our process of building this DIY garden bed cover with double hinged doors:

(If you are having trouble seeing this video, you can watch it on my Youtube.)

I recommend you watch this video to get an idea on what the whole process looks like, then continue reading for DIY materials and step by step instructions 🙂

If you want to watch more videos like this, be sure to subscribe to my Youtube Channel.

DIY raised garden bed cover finished dimensions

For my garden beds, I have two standard 3′ by 6′ raised beds, similar to this one. The finished DIY garden bed cover is about 6 feet wide, 4 feet tall, and slightly less than 3 feet deep.

Why did I reduce the depth of my raised garden bed cover? There are two reasons:

1. I have 1/2″ irrigation tubing sitting on top of the back edge of the raised bed.
2. the fence between our yard and our neighbor’s is quite old so the top portion is slightly leaning to our side.

By reducing the garden cage depth I’m able to address those two factors.

In terms of deciding this garden bed cover and doors height, I need this protective cover to be fairly tall to account for large plants and vines, such as artichokes, peas, and cucumbers. I landed on 4 feet as the garden cage height.

This raised garden bed covers is made from wood and installed with hinges to make them easy to open and close. So each garden bed cover has a pair of doors, attached to the frame with hinges. I also installed two barrel bolt on the top frame to make sure I can close them securely.

Also this DIY garden cover is completely covered by chicken wire for all sides except the bottom. Chicken wire is a durable weather resistant material for garden covers, and does a great job at keeping animals out from my garden bed.

Btw, this DIY garden cage can be removable if you like, or you can attach it to your raised bed securely. I’ll share more on that in details during the instructions.

DIY raised bed cover tools and materials

Here are the materials I used for this DIY garden cage. Most materials listed below are for one 3′ by 6′ raised bed cover, and you may need to adjust the size accordingly depends on how large you want your garden cage to be:

Exterior grade 2 in. x 2 in. x 8 ft wood board

Chicken wire. I use 3′ wide chicken wire because it matches well with my 3′ by 6′ raised bed. I used 30′ per garden bed cover.

Miter saw to cut the wood

1/2″ spade bit and drill

Wire cutter

2 1/2″ Exterior screws

Stapler. You can choose a electric stapler to save some elbow grease

Stainless steel staples (exterior grade)

Brass hinges x 4 (exterior grade)

Brass barrel bolt x 2 (exterior grade)

DIY raised garden bed cover instructions

Here’s the diagram of this garden bed cover I created in SketchUp. This shows how all the pieces come together.

For my 3′ by 6′ garden bed (similar to this raised bed), I cut 2 by 2 boards to the following size:

Note that I leave 1″ out from the depth because I have irrigation tubing sitting on the back edge of the raised bed. You might need to adjust the number based on your situation.

Each cover should be customized for your garden bed, I would encourage you to draw a diagram on paper or 3D tool like SketchUp, to determine the size you’d like to cut, or purchase my ebook to get a cut list.

DIY raised bed cover project cut list

I built this garden bed cover to fit 3’x6′ garden bed. Depends on your raised bed size, the length of wood board you need to cut will vary. Because the wood boards are 1.5″ thick, it is relatively easy to calculate. I recommend you to sketch it out on a paper to figure out the size you need for each piece.

If you have purchased the build plan for this project, I created a do-it-for-you calculator(on page 7), where you’ll input your garden bed size, and it will tell you how much to cut your boards that fits your specific garden bed dimensions.

You can get the build plan here with the calculator.

Step 1. Cut 2in x 2in x 8ft boards to size.

To build the frame of this DIY garden cage, you’ll need to cut those 2×2 boards into two type of pieces, one for building the garden cover frame structure, the other for diagonal braces to support the structure.

All the frame structure pieces are straight cut. All braces are 45 degree diagonal cut.

One trick to quickly produce the braces is to align the board to a point on your miter saw (you can use tape to mark it), and flip it back and forth between cutting. In my case, I used the line(right) on my miter saw to align the 2×2 boards.

If you have watched the video above, you’ll know what I’m talking about. This way you will be able to produce a lot of those pieces in a short amount of time, also they will be exactly the same size without pre-measuring.

To prepare the diagonal braces, I used 1/2″ spade bit to create a dent on each side, about 1″ from the edge. I have used spade bit quite a lot for counter sink screws.

Step 2. Build garden cover frame structure.

Now moving onto assembling the garden bed cover. For each connection, we drill a pilot hole and then screw in the 2″ exterior wood screw. You’ll want to choose exterior grade screws because they won’t rust and deteriorate your raided bed protective cover.

Also, drilling pilot holes is important for this project as without them the wood will tend to split while you attach them.

If you have a pocket hole jig, use it as it will make your life a lot easier.

We didn’t own a pocket hole tool back then, so we used two screws per corner where three 2×2 boards meet. We drilled each hole around 1/3 of the way instead of the exact center, that will give the second screw some space to pass through.

Attach a diagonal brace to straighten and strengthen the corner. You’ll need to attach braces for most of the straight corners except:

1. the front side. You want to leave it open so you can add doors.

2. the bottom side. This is to maximize the planting area of you garden bed without blocking the soil. Also the bottom side of the garden cover is just sitting on top of the raised bed, not really holding any weight by itself.

We started by building the back side first, reinforced it with braces on four corners, then move to the front side. Note for the front side of the garden bed cover, that you’ll want to skip reinforcement to leave space for doors.

You can reference my video to see how we were assembling the frame.

It’s recommended to dry fit your frame on top of your raised bed to make sure the cover fits well.

After assembly,  you should have the basic frame structure of the garden bed cover and a pair of doors. For each door, we have all four corner reinforced with the braces. Now you are ready to attach chicken wire, which is also called poultry netting.

Step 3. Attach chicken wire.

To handle chicken wire, wear gloves to protect your hands. Note the main animals I’m trying to deter are squirrels and mouse, if your garden animal have stronger teeth, consider using garden fence such as this one.

Because my raised bed is 3′ deep, I’m able to lay 3′ wide chicken wire along three sides of the frame continuously without cutting it – from one side to top, then to the other side.

To attach chicken wire, we used stainless steel staples to make it weather resistant.

We used a manual stapler because it is cheaper, but you can use electric stapler as it will make your life a lot easier.

Most of the time the staples won’t go all the way in the wood (at least for our manual one), so we used a hammer to hammer them in more for security.

For corners with braces, cut the chicken wire with a wire cutter, then staple them with exterior grade staples.

For the back side (opposite of double doors), we used two panels of 3′ wide chicken wire, attaching them vertically, then used the extra wire which came with the rolls to weave these two panels.

Trim the excess chicken wire with a wire cutter.

Although both chicken wire and my raised bed is 3′ wide, there will be some extra chicken wire hanging out. I cut them and bent them with a plier to remove the sharp edge.

I went into detail in the video on how I dealt with sharp edge after cutting it.

We Attached chicken wire/poultry netting to all four sides of the garden cover frame, leaving front side and bottom side free of chicken wire.

Step 4. Install hinges and barrel bolts

Now attach hinges and barrel bolts to your raised garden bed cover. I used brass ones because they are more weather resistant than some other materials.

To ensure doors open widely, I unfold the hinge to its openest position, and marked the holes on the frame. Then drill and attach the hinge to the frame. I used 4 hinges per garden bed cover (2 for each door).

After that, I attached each door to the hinges, and test to make sure it opens and closes smoothly. It is recommended to attach the doors after you place the garden cover on top of your raised beds, since your garden bed may not be completely leveled.

Once the doors were attached. I installed the brass barrel bolts, one per door.

I placed the longer part of the barrel bolts on the door because there’s more vertical space. If that’s the case with you, make sure you get the barrel bolts that can lock in position when installed that way.

Step 5. Attach garden bed covers to your raised beds

To attach the protective covers to raised garden beds, I simply let the cover sit on the raised bed structure.

Originally I was planning to add a couple screws to attach the bottom frame to the raised bed, but I skipped it because the cover’s weight seems to be enough to hold it in place just fine.

You can attach this garden bed cover by screwing it into the raised bed. If you need to separate the cover from raised bed often, you can use a few barrel bolt to hold them together – which I learnt from one of my readers.

Step 6. Test, tweak, and enjoy your DIY garden bed fence

That’s all the steps for this DIY garden fence and you made to the end. At this time I’d like to suggest you to test our the doors and hinges, making sure everything function well.

If there are any glitches, don’t be afraid to tweak it until things open and lock smoothly. I did some tweaking on the door hinges and barrel bolts until the door open and close well.

So that is it! I hope you enjoy this DIY raised garden bed cover tutorial and leave me a comment if you have any questions. Garden bed fences are an essential way to keep unwanted animals out of your garden.

Get the Build Plan

I have most of instructions that you need for this DIY project in this post. But it is a long read. If it’s more convenient, you can purchase printable plan here, including a cut list calculator here: DIY Garden Bed Cover Build Plan $4.99.

It has the full instruction with expanded details, optimized in a book format, faster to read, and free of ads. This way you can print it out and bring it with you when you are shopping for materials or building this project.

This build plan also include a do-it-for-you cut list calculator so you input your garden bed measurement and get your custom cut list. Click on the picture below to purchase.

More Garden DIY projects

Best Raised Bed Covers Ideas

Easy DIY Trellis for Less Than $5

DIY Tiered Strawberry Planter

DIY Outdoor Plant Shelves

Pin it for later