NTC thermistor to 1-Wire converter on Arduino Nano

DS18B20 library for use in ARM Cortex M (STM32)

Convenience Wrapper for Dallas Temperature Library

An IoT device for monitoring a swimming pool.

Python Script for sending 12 W1 1 wire sensors into a Home Assistant Instance via MQTT Discovery.

ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems.

Outdoor battery powered temperature sensor compatible with Amazon Alexa.

Installable C++ library for raspberry pi or other single board computer to use DS18B20 temperature sensor

Nosso projeto desenvolve um gerador sustentável que usa pastilhas Peltier para converter o calor do sol em eletricidade, reaproveitando a diferença de temperatura entre reservatórios de água quente e fria. Com monitoramento em tempo real via IoT, oferecemos uma solução limpa e eficiente para gerar energia, sem combustíveis fósseis.

Equip the ESP8266-12E nodemcu with sensor array for automated hydroponic grow-out. For AUTOMATED HYDROPONIC GROW-OUT with the IoT Stack of MQTT, Node Red, InfluxDB and Grafana. System has MQTT Broker on Raspberry Pi that integrates sensors (brightness, water level, temperature, relative humidity) and controllers (LEDs, water pump and cooling fan…

Library to interact with DS18B20 sensor over OneWire protocol using UART and DMA

1-Wire-to-NTC adapter built on Arduino Nano Every

A simple utility class driver wrapper for DS18B20 type temperature sensors. The project uses Arduino IDE + Platofrmio Framework.

The arduino code for AI lab project.

NTP Time on the TS1637 with Temperature using a DS18B20 Dallas OneWire Sensor

A little Arduino script to read DS18B20 non blocking

ESP8266 (NodeMCU) WiFi teplomer. Použitie ako prístupový bod so šifrovaním/bez šifrovania s vlastnou WiFi sieťou. Prípadne použitie ako klienta už na existujúcej WLAN sieti s využítím DHCP, alebo statickej IP adresy.

Sensors firmware

Temperatur måler