Thanks for your interest in Juju! Contributions like yours make good projects great.

1. Building Juju
2. Getting started
3. Dependency management
4. Code formatting
5. Workflow
6. Community

Issue tracker: https://bugs.launchpad.net/juju/+bugs

Documentation:

• https://jaas.ai/docs
• source tree docs

Community:

• https://jujucharms.com/community/
• https://discourse.jujucharms.com/
• #juju on freenode

juju is written in Go (http://golang.org), a modern, compiled, statically typed, concurrent language.

snap install go --channel=1.14/stable --classic

Snap is the recommended way to install Go on Linux.

See https://golang.org/doc/install#install

git clone https://github.com/juju/juju.git

Juju does not depend on GOPATH anymore, therefore you can check juju out anywhere.

cd juju

make install-dependencies

make build

make install

Juju uses git for version control. To get started, install it and configure your username:

git config --global user.name "A. Hacker"
git config --global user.email "[email protected]"

For information on setting up and using git, check out the following:

• https://www.atlassian.com/git/tutorials/
• http://git-scm.com/book/en/Getting-Started-Git-Basics
• GitHub bootcamp

The upstream Juju repository is hosted on Github. Patches to Juju are contributed through pull requests (more on that in the Pushing section). So you should have a github account and a fork there. The following steps will help you get that ready:

1. Sign up for GitHub (a free account is fine): https://github.com/join
2. Add your ssh public key to your account: https://github.com/settings/ssh
3. Hit the "Fork" button on the web page for the Juju repo: https://github.com/juju/juju

At this point you will have your own copy under your github account. Note that your fork is not automatically kept in sync with the official Juju repo (see Staying in sync).

Note that Juju has dependencies hosted elsewhere with other version control tools.

To contribute to Juju you will also need a local clone of your GitHub fork. The earlier go get command will have already cloned the Juju repo for you. However, that local copy is still set to pull from and push to the upstream Juju github account. Here is how to fix that (replace with your github account name):

cd juju
git remote set-url origin [email protected]:<USERNAME>/juju.git

To simplify staying in sync with upstream, give it a "remote" name:

git remote add upstream https://github.com/juju/juju.git

Add the check script as a git hook:

cd juju
ln -s scripts/pre-push.bash .git/hooks/pre-push

This will ensure that any changes you commit locally pass a basic sanity check. Using pre-push requires git 1.8.2 or later, though alternatively running the check as a pre-commit hook also works.

Make sure your local copy and github fork stay in sync with upstream:

cd juju
git pull upstream develop
git push

In the top-level directory of the Juju repo, there is a file, go.mod, that holds the revision ids of all the external projects that Juju depends on. That file is used to freeze the code in external repositories so that Juju is insulated from changes to those repos.

Juju now uses the built in go mod tooling to manage dependencies and therfore you don't need to do anything to ensure you are building with the correct versions.

To update a dependency, use go get -u github.com/the/dependency.

Go already provides a tool, go fmt, that facilitates a standardized format to go source code. The Juju project has one additional policy.

Import statements are grouped into 3 sections: standard library, 3rd party libraries, juju imports. The tool "go fmt" can be used to ensure each group is alphabetically sorted. eg:

    import (
        "fmt"
        "time"

        "labix.org/v2/mgo"
        "github.com/juju/loggo"
        gc "gopkg.in/check.v1"

        "github.com/juju/juju/state"
        "github.com/juju/juju/worker"
    )

Because "gopkg.in/check.v1" will be referenced frequently in test suites, its name gets a default short name of just "gc".

As a project Juju follows a specific workflow:

1. sync with upstream
2. create a local feature branch
3. make desired changes
4. test the changes
5. push the feature branch to your github fork
6. reviews
7. auto-merge
8. continuous-integration

Naturally it is not so linear in practice. Each of these is elaborated below.

First check that the branch is on develop:

git branch
* develop
  old_feature

Then pull in the latest changes from upstream, assuming you have done the setup as above:

git pull upstream develop

All development should be done on feature branches based on a current copy of develop. So after pulling up your local repo, make a new branch for your work:

git checkout -b new_feature

Some tests may require local lxd to be installed, see installing lxd via snap.

Juju uses the gocheck testing framework. gocheck is automatically installed as a dependency of juju. You can read more about gocheck at http://godoc.org/gopkg.in/check.v1. gocheck is integrated into the source of each package so the standard go test command is used to run gocheck tests. For example

go test github.com/juju/juju/...

will run all the tests in the Juju project. By default gocheck prints only minimal output, and as gocheck is hooked into the testing framework via a single go test test per package, the usual go test -v flags are less useful. As a replacement the following commands produce more output from gocheck.

go test -gocheck.v

is similar to go test -v and outputs the name of each test as it is run as well as any logging statements. It is important to note that these statements are buffered until the test completes.

go test -gocheck.vv

extends the previous example by outputting any logging data immediately, rather than waiting for the test to complete. By default gocheck will run all tests in a package, selected tests can by run by passing -gocheck.f to match a subset of test names.

go test -gocheck.f '$REGEX'

Finally, because by default go test runs the tests in the current package, and is not recursive, the following commands are equal, and will produce no output.

cd juju
go test
go test github.com/juju/juju

Many tests use a standalone instance of mongod as part of their setup. The mongod binary found in $PATH is executed by these suites.

Some tests (particularly those under ./store/...) assume a MongoDB instance that supports Javascript for map-reduce functions. These functions are not supported by juju-mongodb and the associated tests will fail unless disabled with an environment variable:

JUJU_NOTEST_MONGOJS=1 go test github.com/juju/juju/...

When ready for feedback, push your feature branch to github, optionally after collapsing multiple commits into discrete changes:

git rebase -i --autosquash develop
git push origin new_feature

Go to the web page (https://github.com/$YOUR_GITHUB_USERNAME/juju) and hit the "Pull Request" button, selecting develop as the target.

This creates a numbered pull request on the github site, where members of the Juju project can see and comment on the changes.

Make sure to add a clear description of why and what has been changed, and include the Launchpad bug number if one exists.

It is often helpful to mention newly created proposals on the Discourse forum, especially if you would like a specific developer to be aware of the proposal.

Note that updates to your GitHub project will automatically be reflected in your pull request.

Be sure to have a look at:

https://help.github.com/articles/using-pull-requests

All PRs run pre-merge check - unit tests and a small but representative sample of functional tests. This check is re-run anytime the PR changes, for example when a new commit is added.

You can also initiate this check by commenting !!build!! in the PR.

The Juju project uses peer review of pull requests prior to merging to facilitate improvements both in code quality and in design.

Once you have created your pull request, it will be reviewed. Make sure to address the feedback. Your request might go through several rounds of feedback before the patch is approved or rejected. Once you get an approval from a member of the Juju project, you are ready to have your patch merged. Congratulations!

Continuous integration is automated through Jenkins:

The bot runs on all commits during the PRE process, as well as handles merges. Use the $$merge$$ comment to land a PR.

Static Analysis can be performed by running make static-analysis

Required dependencies for full static analysis are:

• *nix tools (sh, grep etc.)
• shellcheck
• python3
• go
• golint
• goimports
• deadcode
• misspell
• unconvert
• ineffassign

The Juju community is growing and you have a number of options for interacting beyond the workflow and the issue tracker.

Use the following links to contact the community:

• Community page: https://jujucharms.com/community/
• IRC channel on freenode: #juju
• Discourse forum: https://discourse.jujucharms.com/