Makefile.devel

## -*- makefile -*-
##
## Makefile for Proof General development.
##
## Author:  David Aspinall <David.Aspinall@ed.ac.uk>
##
## Maintainer:  Proof General maintainer <da+pg-support@inf.ed.ac.uk>
##
## Developer use only, not part of user distribution.
##
##    make clean	  - remove intermediate files
##    make distclean	  - remove all generated files
##
##    make elisptidy	  - tidy up elisp files (run whitespace-cleanup)
##
##    make ChangeLog	  - make ChangeLog from git log
##    make tags		  - update TAGS file for Elisp sources
##    make autoloads	  - update autoloads
##
##    make tag		  - tag the sources with GIT_RELEASENAME
##    make untag	  - remove tag GIT_RELEASENAME from the sources
##    make dist           - make a distribution from sources with above tag
##    make rpm		  - make RPM packages based on etc/ProofGeneral.spec
##    make pkg		  - make Emacs tar file packages (Tromey's package.el)
##
##    make release	  - make tag, dist, and install it in RELEASEDIR.
##    make releaseall	  - make release, local installation and rpmrelease.
##
##    make distinstall	  - install distribution build by 'make dist'
##			    into DISTINSTALLDIR.
##
##    make golive	  - publish previously built distribution
##
##    make links	  - add some links which help testing web pages
##			    from the html directory.
##
##    make releaseclean   - clean up after 'make dist' 'make rpmrelease'.
##
##    make testall.emacs23- run all autotest files in Emacs named "emacs23"
##
##
## Notes:
##
##   Use 'make releaseclean' if giving up, to remove temp dirs.
##
##   NB: no facility to edit html to make a full release in this Makefile.
##   Edit download.html by hand, then run
##
##      make releaseall VERSION=2.0
##
##   Or similar to make the required version.
##
##   To customize the tags in case of a re-release with the same
##   official version:
##
##      make releaseall VERSION=2.0 FULLVERSION=2.0.1
##
##
## $Id$
##
###########################################################################

## TODO: could include prerel tag in web pages, and link using -latest
## sym links.  Would avoid needing to edit html below.


# Names and real mail addresses of developers
# Arguments for rcs2log for ChangeLog target
# NB: must use TAB as separator in list below.

DEVELOPERS=\
-u "da	David Aspinall	da@inf.ed.ac.uk" \
-u "gkein	Gerwin Klein	gklein@in.tum.de" \
-u "sberghof	Stefan Berghofer	berghofe@in.tum.de" \
-u "markus	Makarius	makarius@sketis.net" \
-u "makarius	Makarius	makarius@sketis.net" \
-u "pier	Pierre Courtieu	courtieu@lri.fr" \
-u "crr	Christophe Raffalli	Christophe.Raffalli@univ-savoie.fr" \
-u "pxc	Paul Callaghan	P.C.Callaghan@durham.ac.uk" \
-u "patrl	Patrick Loiseleur	da+pg-patrl@inf.ed.ac.uk" \
-u "tms	Thomas Kleymann	da+pg-tms@inf.ed.ac.uk" \
-u "djs	Dilip Sequiera	da+pg-djs@inf.ed.ac.uk" \
-u "hhg	Healfdene Goguen	da+pg-hhg@inf.ed.ac.uk" \
-u "gklein	Gerwin Klein	gerwin.klein@nicta.com.au" \
-u "assia	Assia Mahboubi	assia.mahboubi@inria.fr" \
-u "monnier	Stefan Monnier	monnier@iro.umontreal.ca" \
-u "tews	Hendrik Tews	hendrik@askra.de"

# PRERELEASE_PREFIX is used to match PRERELEASE_TAG in sed
# line in tag target below, which edits $(DOWNLOADHTML)
# The prereltag.txt is kept as a record in the distrib area
# of the current pre-release version (currently not used explicitly
# anywhere for web pages/whatever).
PRERELEASE_PREFIX=4\.6-git
PRERELEASE_TAG=4.6-git
### Formerly: PRERELEASE_TAG=4.4pre$(shell date "+%y%m%d")
PREREL_TAG_FILE=prereltag.txt

# Path to web pages in repository, used for automatically
# updating with release information.
HTMLDIR=../web
DOWNLOADHTMLS=devel.html

# This is used for full releases to control the tag name
# and distribution name.  No editing of html is done
# when PRERELEASE_TAG != VERSION
VERSION=$(PRERELEASE_TAG)

# Date stamp used in file if we're making a full release.
DATEMSG=$(shell if [ $(PRERELEASE_TAG) = $(VERSION) ]; then echo; else date "+ on %a %e %b %Y"; fi)


# devel just means developer's package, with more files.
# bit ambiguous: "development version" means latest version,
# in development.
# LATESTNAME is linked to the development version.
# NAME is linked to the current release.
NAME = ProofGeneral
LATESTNAME = $(NAME)-latest

VERSIONVARIABLE=proof-general-version
VERSIONFILE=proof-site.el

# Full version number defaults to ordinary version number.
FULLVERSION=$(VERSION)

# Name of tar file and RPM file.
RELEASENAME = $(NAME)-$(VERSION)
GIT_RELEASENAME ?= v$(FULLVERSION)

# Where to release (i.e. copy) a new distribution to.
# This may be the final directory (local) or temporary directory.
# # was: RELEASEDIR = /home/proofgen/www
RELEASEDIR = /tmp/proofgeneral-www

# How to make the release "live".  (Could be "true" to do nothing).
GOLIVE=rsync -e ssh -auv $(RELEASEDIR)/* ssh.inf.ed.ac.uk:/group/project/proofgeneral/web/releases/

# Emacs for batch compiling
BATCHEMACS=$(EMACS) -batch -q -no-site-file

# Emacs for interactive use in testing
EMACSFLAGS=-q -no-site-file

# GNU version of tar, please
TAR=tar

# Files not to include the distribution area or tarball
UNFINISHED_ELISP=
ETC_FILES=etc/coq etc/demoisa etc/patches etc/*.txt
NONDISTFILES=.gitignore */.gitignore Makefile.devel etc/trac etc/testsuite $(UNFINISHED_ELISP) $(ETC_FILES)
DOCDISTFILES=ProofGeneral.info PG-adapting.info

# Files not to include in the ordinary distribution tarball, but left
# in the server's copy of the distribution.
# NB: these are *patterns* to exclude rather than files!
IGNOREDFILES=ProofGeneral*/TAGS ProofGeneral*/doc/ProofGeneral.pdf ProofGeneral*/doc/PG-adapting.pdf ProofGeneral*/doc/docstring-magic.el ProofGeneral*/etc/TESTS

# Temporary directory to to build a distribution in
DISTBUILDIR = /tmp/ProofGeneralRelease

# Temporary dmg root for building Mac OS X disk image files.
DMGTOPDIR=/tmp/$(NAME)-dmg

RELEASENAMETGZ = $(RELEASENAME).tgz
RELEASENAMERPM = $(RELEASENAME)-1.noarch.rpm
RELEASENAMEDMG = $(RELEASENAME).dmg

# Where to install a distribution
DISTINSTALLDIR=/usr/local/share/elisp/proofgeneral

SUBDIRS=$(ELISP_DIRS_COMP) etc doc images

PWD=$(shell pwd)

FORCE:

# Targets to pre-compile for distribution
# Warning: elisp files are incompatible across emacs versions!
alldist:	distcompile distdocs


############################################################
#
# Make tags file
#
TAGS_EXTRAS=
ETAGS=etags
tags:	$(EL) $(TAGS_EXTRAS)
	$(ETAGS) $(EL) $(TAGS_EXTRAS) doc/ProofGeneral.texi doc/PG-adapting.texi > TAGS


############################################################
#
# Run tests for a particular prover and particular Emacs
#
run.%:
	$(EMACS) $(EMACSFLAGS) -l generic/proof-site.el -eval '(proof-visit-example-file "$*")'

test.%:
	if [ -f "$*/$*-autotest.el" ]; then if $(EMACS) $(EMACSFLAGS) -l generic/proof-site.el $*/$*-autotest.el -f eval-current-buffer; then echo "Autotests for $* run successfully on `date`"; else cat $*/.autotest.log; echo "Autotests for $* ran with failures on `date`"; exit 1; fi; fi

profile.%:
	if [ -f "$*/$*-profiling.el" ]; then if $(EMACS) $(EMACSFLAGS) -l generic/proof-site.el $*/$*-profiling.el -f eval-current-buffer; then echo "Profiling for $* run successfully on `date`"; else echo "Profiling for $* ran with failures on `date`"; exit 1; fi; cat $*/.profile.log; fi

testall.%:
	for prover in ${PROVERS}; do $(MAKE) test.$$prover EMACS=$*; done


############################################################
#
# Add recent messages to ChangeLog.
#
# FIXME: this duplicates entries made on the same day: we could do
# with a way of cleaning the last day from the ChangeLog.
#
ChangeLog:	FORCE
	git log --pretty="format:%ad %s" --date=short > ChangeLog


############################################################
#
# Clean up intermediate files
#
devclean: FORCE
	@echo "***** CLEANING UP INTERMEDIATE FILES ****"
	rm -f doc/ProofGeneralPortrait.eps.gz
	rm -f $(HTMLDIR)/ProofGeneral


############################################################
#
# Clean up intermediate files, all generated files
#  and Emacs backups.
#
distclean: devclean clean
	@echo "***** CLEANING UP ALL JUNK FILES ****"
	find . \( -name '*~' -o -name '#*#' -o -name '\.\#*' -o -name '\.*\.log' \) -print | xargs rm -f
	(cd doc; $(MAKE) distclean)


############################################################
#
# autoloads in generic/
#
autoloads: $(EL)
	@echo "***** MAKING AUTOGENERATED AUTOLOADS  ****"
	$(BATCHEMACS) -eval '(setq autoload-package-name "proof" generated-autoload-file "$(PWD)/generic/proof-autoloads.el")' -f batch-update-autoloads  generic/ lib/ coq/ qrhl/

############################################################
#
# Elisp tidy
#
tidy: $(EL)
	@echo "***** CLEANUP ELISP FILES  ****"
	for f in $(EL); do echo "Cleaning $$f"; $(BATCHEMACS) -eval "(progn (find-file \"$$f\") (whitespace-cleanup) (save-buffer))"; done


############################################################
#
# Documentation
#
distdocs: FORCE
	@echo "***** MAKING DISTRIBUTION DOCS  ****"
	(cd doc; ln -s $(HTMLDIR)/ProofGeneralPortrait.eps.gz .; $(MAKE) dist)

############################################################
#
# Compilation
#
distcompile: FORCE
	@echo "***** MAKING ELC FILES  ****"
	$(MAKE) compile


############################################################
##
## tag:    tag the sources of working directory with GIT_RELEASENAME,
##	   set version stamp in proof-site.el and ProofGeneral.spec
##         to VERSION, and edit $(DOWNLOADHTMLS)
##	   if VERSION matches PRERELEASE_TAG.
##
tag:
	@echo "*************************************************"
	@echo " Tagging sources... "
	@echo "*************************************************"
	if [ -z "$(NOCVS)" ]; then git fetch origin && git log --exit-code master...origin/master || exit 1; fi
# Update version in proof-site.el
	(cd generic; mv $(VERSIONFILE) $(VERSIONFILE).old; sed -e 's/defconst $(VERSIONVARIABLE) \".*\"/defconst $(VERSIONVARIABLE) \"Proof General Version $(FULLVERSION).\"/g' $(VERSIONFILE).old > $(VERSIONFILE); rm $(VERSIONFILE).old)
# Tag ProofGeneral.spec
	(cd etc; mv ProofGeneral.spec ProofGeneral.spec.old; sed -e 's/Version:.*$$/Version:	$(VERSION)/g' ProofGeneral.spec.old > ProofGeneral.spec; rm ProofGeneral.spec.old)
# Edit $(DOWNLOADHTMLS) only for prereleases.
# Careful: the sed command below relies on previous value of PRERELEASE_TAG.
#	if [ $(PRERELEASE_TAG) = $(VERSION) ]; then \
#	  (cd $(HTMLDIR); \
#	   for f in $(DOWNLOADHTMLS); do \
#		mv $$f $$f.old; \
#		sed -e 's|ProofGeneral\([emacselc-]*\)-$(PRERELEASE_PREFIX)......|ProofGeneral\1-$(PRERELEASE_TAG)|g' $$f.old > $$f; \
#		rm $$f.old; \
#	   done) \
#	fi
	if [ -z "$(NOCVS)" ]; then git add generic/$(VERSIONFILE) etc/ProofGeneral.spec && git commit -m"Set version tag for new release." ; fi
	if [ -z "$(NOCVS)" ]; then git tag -a  "$(GIT_RELEASENAME)"; fi

############################################################
##
## untag:  Remove the GIT_RELEASENAME tag from the sources.
##

untag:
	git tag -d "$(GIT_RELEASENAME)"

############################################################
##
## dist: make a distribution in DISTBUILDIR from CVS sources
##       Builds for user-distribution, from sources tagged
##       with GIT_RELEASENAME.
##	 Moves html files to parent directory, removes
##       non-distributed files.
##

cvsexport:
	@echo "*************************************************"
	@echo " Cleaning build directory and running cvs export..."
	@echo "*************************************************"
	rm -rf $(DISTBUILDIR)
	mkdir -p $(DISTBUILDIR)
	if [ -z "$(NOCVS)" ]; then \
	   git archive --format=tar --prefix=$(RELEASENAME)/ $(GIT_RELEASENAME) | (cd "$(DISTBUILDIR)" && tar xf -) \
	else \
	   mkdir -p $(DISTBUILDIR)/$(RELEASENAME); \
	   cp -pr . $(DISTBUILDIR)/$(RELEASENAME); \
	fi

dist:	cvsexport
	@echo "*************************************************"
	@echo " Running 'make alldist' for new release .."
	@echo "*************************************************"
	(cd $(DISTBUILDIR)/$(RELEASENAME); $(MAKE) alldist)
	@echo "*************************************************"
	@echo " Cleaning and copying doc files .."
	@echo "*************************************************"
	(cd $(DISTBUILDIR)/$(RELEASENAME)/doc; cp -pr $(DOCDISTFILES) $(DISTBUILDIR))
	(cd $(DISTBUILDIR)/$(RELEASENAME)/doc; $(MAKE) clean)
	(cd $(DISTBUILDIR); cp -pr $(DOCDISTFILES) $(RELEASENAME)/doc)
	@echo "*************************************************"
	@echo " Cleaning non-distributed files .."
	@echo "*************************************************"
	(cd $(DISTBUILDIR)/$(RELEASENAME); rm -rf $(NONDISTFILES))
	@echo "*************************************************"
	@echo " Making compressed tar file..."
	@echo "*************************************************"
	-(cd $(DISTBUILDIR); ls $(IGNOREDFILES) > ignoredfiles; echo ignoredfiles >> ignoredfiles)
#	link the long name to short name for convenience of user
	(cd $(DISTBUILDIR); ln -sf $(RELEASENAME) $(NAME))
	$(TAR) cvzf $(DISTBUILDIR)/$(RELEASENAMETGZ) --directory $(DISTBUILDIR) --exclude-from $(DISTBUILDIR)/ignoredfiles $(RELEASENAME) $(NAME)
#	remove temporary files made for tar/zip only
	(cd $(DISTBUILDIR); rm -f ignoredfiles $(NAME))
	@echo "*************************************************"
	@echo " Finished making dist."
	@echo "*************************************************"


############################################################
##
## release:
##     tag the sources, and make a distribution.
##     Then install the distribution in RELEASEDIR
##     WARNING: RELEASEDIR is not cleaned except to remove
##     links, but files there with same names will be overwritten.
##
release: check distclean tag dist
	@echo "*************************************************"
	@echo " Making release (installing tarball distributions)."
	@echo "*************************************************"
	mkdir -p $(RELEASEDIR)
	(cd $(DISTBUILDIR); rm -f $(NAME))
	(cd $(RELEASEDIR); rm -rf $(RELEASENAME))
	cp -pfR $(DISTBUILDIR)/* $(RELEASEDIR)
	(cd $(RELEASEDIR); rm -f $(LATESTNAME); ln -s  $(RELEASENAME) $(LATESTNAME))
	(cd $(RELEASEDIR); ln -sf $(RELEASENAMETGZ) $(LATESTNAME).tgz)
	(cd $(RELEASEDIR); echo $(PRERELEASE_TAG) > $(PREREL_TAG_FILE))
	@echo "*************************************************"
	@echo " Finished installing dist."
	@echo "*************************************************"


############################################################
##
## rpm:
##     Build an RPM binary package from the recently made distribution
##     using the tarball.  (Any user could do this)
##
##

# Temporary RPM topdir for building packages as non-root user.
RPMTOPDIR=/tmp/$(NAME)-rpm
RPMBUILD=rpmbuild --define '_topdir $(RPMTOPDIR)'

rpm:
	rm -rf $(RPMTOPDIR)
	mkdir -p $(RPMTOPDIR)/RPMS
	mkdir -p $(RPMTOPDIR)/SPECS
	mkdir -p $(RPMTOPDIR)/SOURCES
	mkdir -p $(RPMTOPDIR)/BUILD
	$(RPMBUILD) -tb $(DISTBUILDIR)/$(RELEASENAMETGZ)


############################################################
##
## pkg:
##     Build an Emacs .tar file package
##
PKGMOVES=doc/dir doc/ProofGeneral.info doc/PG-adapting.info
PKGDELETES=obsolete etc doc
# Emacs package version is fussy about non-numbers in version, have to make version
# from date.
PKG_VERSION=$(shell echo $(FULLVERSION) | sed 's/$(PRERELEASE_PREFIX)/20/g' | sed 's/RC/\.0/g')
PKG_RELEASENAME=$(NAME)-$(PKG_VERSION)
pkg:	cvsexport
	(cd $(DISTBUILDIR); if [ "$(RELEASENAME)" != "$(PKG_RELEASENAME)" ]; then mv $(RELEASENAME) $(PKG_RELEASENAME); fi)
	(cd $(DISTBUILDIR)/$(PKG_RELEASENAME)/doc; make info)
	(cd $(DISTBUILDIR)/$(PKG_RELEASENAME); mv $(PKGMOVES) .;  rm -rf $(PKGDELETES))
	(cd $(DISTBUILDIR)/$(PKG_RELEASENAME); echo '(define-package "ProofGeneral" "$(PKG_VERSION)" "Proof General theorem prover interface")' > ProofGeneral-pkg.el)
	(cd $(DISTBUILDIR); tar -cf $(PKG_RELEASENAME).tar $(PKG_RELEASENAME))


############################################################
##
## rpmrelease:
##     Build and install RPM package into RELEASEDIR.
##
rpmrelease: rpm
	cp -pf $(RPMTOPDIR)/RPMS/noarch/* $(RELEASEDIR)

############################################################
##
## dmg: [experimental]
##     Build (on Linux) a Mac OS X dmg disk image file
##     This requires sudo powers for mounting, and
##     (on Ubuntu), packages hfsplus and hfsprogs
##
## Warning: the following line was removed below so Contents/MacOS'll be empty:
##     mv $(NAME)/bin/proofgeneral Contents/MacOS;
DMGBUILD=$(DISTBUILDIR)/dmg
dmg:
	rm -rf $(DMGBUILD)
	mkdir -p $(DMGBUILD)
	dd if=/dev/zero of=$(DISTBUILDIR)/$(RELEASENAMEDMG) bs=1 count=0 seek=16M
	/sbin/mkfs.hfsplus -v $(RELEASENAME) -s $(DISTBUILDIR)/$(RELEASENAMEDMG)
	(cd $(DMGBUILD); mkdir dmgfs; \
	sudo mount -t hfsplus -o loop,user $(DISTBUILDIR)/$(RELEASENAMEDMG) dmgfs; \
	sudo chown $(LOGNAME) dmgfs; \
	$(TAR) -xpzf $(DISTBUILDIR)/$(RELEASENAMETGZ); \
	mkdir -p Contents/Resources; \
	mkdir -p Contents/MacOS; \
	mv $(NAME)/* Contents/Resources; \
	rm -rf $(NAME) $(RELEASENAME); \
	mkdir $(NAME).app; \
	mv Contents $(NAME).app;\
	sudo umount dmgfs)
# on mac:
#	hdiutil create -srcfolder $(DISTBUILDIR)

############################################################
##
## releaseclean:
##     Clean up temporary directories after building dist/release.
##
releaseclean:
	rm -rf $(DISTBUILDIR) $(RPMTOPDIR)

############################################################
##
## fakereleaseall:
##     Do everything, but don't access CVS.  Just for
##     testing on non-live system, really.
## FIXME: does this still make sense now that git is used version control?
##
fakereleaseall:
	$(MAKE) -f Makefile.devel release releaseclean NOCVS="no"

############################################################
##
## releaseall:
##     Do everything!  (EXCEPT: ChangeLog.gz update)
##
releaseall: release releaseclean golive

############################################################
##
## golive:
##     Execute golive command.
##
golive:
	$(GOLIVE)
	cd $(HTMLDIR); for f in $(DOWNLOADHTMLS); do $(MAKE) pub.$$f; done;
	rm -rf $(RELEASEDIR)


############################################################
##
## releasefinal:
##     Do everything for a final release based on a pre-release.
##     Except editing download file.
##
releasefinal: release releaseclean
# Link the latest version
# 31.5.13: remove this link from tar file, it is unconventional
#	(cd $(DISTBUILDIR); rm -f $(NAME); ln -sf $(RELEASENAME) $(NAME))


############################################################
##
## distinstall:
##     Do everything for a local release.
##
distall: distclean tag dist distinstall releaseclean


############################################################
#
# distinstall:
#   Install distribution from $(DISTBUILDIR) into DISTINSTALLDIR
#   Clean out DISTINSTALLDIR first.
###   NB!  Simple install, no attempt to put info files, etc, in
#   special places.
#
distinstall:
	rm -rf $(DISTINSTALLDIR)/$(NAME)
	mkdir -p $(DISTINSTALLDIR)
	(cd $(DISTINSTALLDIR); \
	 $(TAR) -xpzf $(DISTBUILDIR)/$(RELEASENAMETGZ); \
	 mv $(RELEASENAME) $(NAME))

############################################################
#
# links:
#
#   Make some handy links for developers.
#
links:
	ln -sf $(HTMLDIR)/ProofGeneralPortrait.eps.gz doc
	ln -sf ../../ProofGeneral $(HTMLDIR)

#################################################################
##
## Reporting Makefile settings.
##
## Useful for debugging Makefile

show.%:
	@echo $($*)