Program to check current device firmware version and perform upgrade if necessary. Depends on:

• UCI configuration to hold current firmware version number and build number
• An API to read data on the latest firmware releases

Read on to find out how to configure oupgrade based on your needs.

Run oupgrade --help for information on using the program.

Depends on following config in /etc/config/onion:

config onion
        option version '0.3.2'
        option build '232'

config oupgrade 'oupgrade'
        option api_url 'https://api.onioniot.com/firmware'
        option ack_upgrade '1'
        option auto_update '0'
        option update_frequency 'monthly'

• api_url - specifies the URL of the Firmware API
  • Expecting a URL
• ack_upgrade - Update acknowledge nable/disable - ie sending a message to the Firmware API when an upgrade is started and completed
  • 0 for disabled, 1 for enabled
• auto_update - enable/disable automatic updates (updates run with --force and --latest flags)
  • 0 for disabled, 1 for enabled
• update_frequency - specify the frequency of automatic updates
  • Valid options are daily, weekly, monthly

Device administrators can use UCI configuration to specify the URL that will be used by oupgrade to read the most recent firmware info. This allows Omega2 users to use the existing upgrade mechanism but with a custom firmware server, and perhaps custom firmware.

If the API URL is not specified, oupgrade will default to https://api.onioniot.com/firmware

Expecting the API to have the following endpoint:

GET /{device}/{firmwareType}

Where:

• {device} is the device name.
  • Determined by oupgrade by running ubus call system board and reading the board_name key-value pair. With Onion products: omega2, omega2p, omega2pro, etc
• {firmwareType} can be stable or latest
  • stable - indicates a stable firmware, safe to be released to be used by all devices
  • latest - indicates the latest released firmware, the bleeding edge. May not be safe for all devices.

Expecting the following response:

{
  "version": "0.3.2",
  "url": "http://repo.onioniot.com/omega2/images/omega2-v0.3.2-b235.bin",
  "build": 235,
  "device": "omega2",
  "stable": false
}

With this feature, devices have the ability to report to an API when firmware upgrades are started and completed. This provides device administrators with data on which firmware versions are being used by deployed devices.

If update acknowledge enabled is not specified, it will default to disabled.

The HTTP request will be made to the following endpoint on the API URL specified in the configuration:

POST /

With a x-www-form-urlencoded payload containing the following:

• mac_addr - the device ra0 MAC address (matches the sticker on the device)
• device - the device name
  • Determined by oupgrade by running ubus call system board and reading the board_name key-value pair. With Onion products: omega2, omega2p, omega2pro, etc
• firmware_version - the firmware version number, eg 0.3.2
• firmware_build - the firmware build number, eg 232
• upgrade_status - status of the upgrade: starting or complete

Firmware updates will be acknowledged in two scenarios:

1. The start of a firmware upgrade
2. When a firmware upgrade is completed

After the new target firmware is downloaded and before the system upgrade starts, the update acknowledge will be sent, with starting set as the upgrade_status in the payload.

Firmware upgrade completed acknowledgements will be sent once the device boots the new firmware for the first time. The mechanism for tracking this is a /etc/oupgrade file that holds the device's firmware version number and build number in plain text.

The oupgrade program will run automatically at boot with the --acknowledge flag.

Possible scenarios:

• If the /etc/oupgrade file does not exist -> an upgrade has been completed
  • Create the /etc/oupgrade file and populate it with the current firmware version and build numbers
  • Send a firmware upgrade completed acknowledge
• If the /etc/oupgrade file exists but the version number and build it contains does not match the system's version data -> an upgrade has been completed
  • Populate the /etc/oupgrade file with the current firmware version and build numbers
  • Send a firmware upgrade completed acknowledge
• All other cases -> no updates
  • Do nothing

UCI configuration can now be used to configure automatic firmware updates on a regular interval. This provides Omega2 users with a mechanism to make sure deployed devices automatically update to new firmware.

If not specified, automatic updates will be disabled by default.

The UCI configuration determines if automatic updates are enabled, and if so, the interval at which the update check will be performed. See the UCI configuration section for more details on the configuration options.

The available update check intervals are daily, weekly, and monthly.

Once the configuration has been set, run oupgrade autoupdate for the changes to be applied.

Let's say we want weekly updates, run the following commands:

uci set onion.oupgrade.auto_update='1'
uci set onion.oupgrade.update_frequency='weekly'
uci commit
oupgrade autoupdate

Now the device will check once a week for firmware updates.

If automatic updates are enabled, the oupgrade program will be run at the specified interval with the latest flag.

This means it will check for firmware information from the {device}/latest endpoint (latest flag). The upgrade will only take place if the endpoint reports a firmware with a greater version number is available.