The Kbdfltr sample is an example of a keyboard input filter driver.

This sample is WDF version of the original WDM filter driver sample. The WDM version of this sample has been deprecated.

This is an upper device filter driver sample for PS/2 keyboard. This driver layers in between the KbdClass driver and i8042prt driver and hooks the callback routine that moves keyboard inputs from the port driver to class driver. In its current state, it only hooks into the keyboard packet report chain, the keyboard initialization function, and the keyboard ISR, but does not do any processing of the data that it sees. (The hooking of the initialization function and ISR is only available in the i8042prt stack.) With additions to this current filter-only code base, the filter could conceivably add, remove, or modify input as needed.

This sample also creates a raw PDO and registers an interface so that applications can talk to the filter driver directly without going through the PS/2 devicestack. The reason for providing this additional interface is because the keyboard device is an exclusive secure device and it's not possible to open the device from usermode and send custom ioctls through it.

This driver filters input for a particular keyboard on the system. If you want to filter keyboard inputs from all the keyboards plugged into the system, you can install this driver as a class filter below the KbdClass filter driver by adding the service name of this filter driver before the KbdClass filter in the registry at:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E96B-E325-11CE-BFC1-08002BE10318}\UpperFilters

This sample builds a Universal Windows Driver. It uses only APIs and DDIs that are included in OneCoreUAP.

This step is required for automatic deployment (described later) to work properly. In the kbfiltr.inx file (located with the driver source files), find the [DDK_Ex.Mfg.NT$ARCH$] section. Change the hardware ID in the %DDK_Ex% entry from the dummy value to the hardware ID of the PS/2 keyboard on the target computer. The following example shows the hardware ID change.

; For XP and above
[DDK_Ex.Mfg.NT$ARCH$]
;%DDK_Ex% = kbfiltr, *PNP0BAAD
%DDK_Ex% = kbfiltr, ACPI\VEN_PNP&DEV_0303

In Visual Studio, on the Build menu, choose Build Solution.

For more information about using Visual Studio to build a driver package, see Building a Driver with Visual Studio and the WDK.

The test application, kbftest.exe is also built as part of the solution under the 'exe' folder.

In File Explorer, navigate to the folder that contains your built driver package. The location of this folder varies depending on what you set for configuration and platform. For example, if your settings are Debug and x64, the package is your solution folder under \Debug\Package.

The package contains these files:

As an alternative to building the Kbfiltr Filter Driver sample in Visual Studio, you can build it in a Visual Studio Command Prompt window. In Visual Studio, on the Tools menu, choose Visual Studio Command Prompt. In the Visual Studio Command Prompt window, navigate to the folder that has the solution file, kbfiltr.sln. Use the MSBuild command to build the solution. Here are some examples:

• msbuild /p:configuration="Debug" /p:platform="x64" kbfiltr.sln

• msbuild /p:configuration="Release" /p:platform="Win32" kbfiltr.sln

For more information about using MSBuild to build a driver package, see Building a Driver with Visual Studio and the WDK.

The computer where you install the driver is called the target computer or the test computer. Typically this is a separate computer from where you develop and build the driver package. The computer where you develop and build the driver is called the host computer.

The process of moving the driver package to the target computer and installing the driver is called deploying the driver. You can deploy kbfiltr sample driver automatically or manually.

Before you automatically deploy a driver, you must provision the target computer. For instructions, see Provision a computer for driver deployment and testing.

1. On the host computer, in Visual Studio, in Solution Explorer, right click package (lower case), and choose Properties. Navigate to Configuration Properties > Driver Install > Deployment.

2. Check Enable deployment, and check Remove previous driver versions before deployment. For Target Computer Name, select the name of a target computer that you provisioned previously. Select Install and Verify, and choose Default Driver Package Installation Task in the list. Click OK.

3. On the Build menu, choose Deploy Package or Build Solution.

Before you manually deploy a driver, you must turn on test signing and install a certificate on the target computer. You also need to copy the DevCon tool to the target computer. For instructions, see Preparing a Computer for Manual Driver Deployment.

1. Copy all of the files in your driver package to a folder on the target computer (for example, c:\KbfiltrDriverPackage).

2. On the target computer, open a Command Prompt window as Administrator. Navigate to your driver package folder, and enter the Devcon command with the correct hardware ID, such as:

   Devcon install kbfiltr.inf ACPI\VEN_PNP&DEV_0303

   -or-

   Using Device Manager, update the driver for the PS/2 Keyboard by manually selecting kbfiltr.inf from the location where you copied the driver files.

On the target computer, in a Command Prompt window, enter devmgmt to open Device Manager. In Device Manager, on the View menu, choose Devices by type. In the device tree, locate DDK Example Device that needs filtering under the Keyboards node.

To use the test application provided with the sample, it must be copied to the target computer manually. Save the kbftest.exe file from the folder where the build result is placed (for example, exe\Debug). This file is copied somewhere on the target, possibly where the driver package files are located. The test application is the executed on the target computer in a Command Prompt using kbftest as the command.