Schema Exporter for Confluent Schema Registry

A tool to export schemas from a Confluent Schema Registry to another through the REST API. This app supports five modes: batchExport, sync, getLocalCopy, fromLocalCopy, and schemaLoad.

sync will continuously sync newly registered schemas into the destination registry.
batchExport will do a one time migration between schema registries, then it will reset the destination registry to READWRTIE mode.
getLocalCopy will fetch and write local copies of Schema Registry’s Schemas.
fromLocalCopy will write schemas fetched by getLocalCopy to the destination Schema Registry.
schemaLoad will write schemas from your local directory to Schema Registry.

This tool supports migrating from self-hosted Schema Registries as well, but if you are looking to migrate schemas between On-Premise and Confluent Cloud, check out Confluent Replicator. (Dummy values can be placed for non-secured Schema Registries)

The exporter expects the following variables to be set in the environment to make the necessary calls: (In the case of -getLocalCopy and -customDestination it does not need DST_* variables; In the case of -fromLocalCopy, -schemaLoad, and -customSource it does not need SRC_* variables)

SRC_SR_URL : The URL for the source Schema Registry
SRC_API_KEY : The API KEY to be used to make calls to the source Schema Registry
SRC_API_SECRET : The API SECRET to be used to make calls to the source Schema Registry
DST_SR_URL : The URL for the destination Schema Registry
DST_API_KEY : The API KEY to be used to make calls to the destination Schema Registry
DST_API_SECRET : The API SECRET to be used to make calls to the destination Schema Registry

It is also possible to define the credentials through command flags. If both are defined, the flags take precedence.

Build

git clone https://github.com/abraham-leal/ccloud-schema-exporter
cd ccloud-schema-exporter
go build ./cmd/ccloud-schema-exporter/ccloud-schema-exporter.go

Docker Run

docker run \
  -e SRC_SR_URL=$SRC_SR_URL \
  -e SRC_API_KEY=$SRC_API_KEY \
  -e SRC_API_SECRET=$SRC_API_SECRET \
  -e DST_SR_URL=$DST_SR_URL \
  -e DST_API_KEY=$DST_API_KEY \
  -e DST_API_SECRET=$DST_API_SECRET \
  abrahamleal/ccloud-schema-exporter:latest

A sample docker-compose is also provided under the samples folder.

The docker image handles -sync -syncDeletes -syncHardDeletes -withMetrics -noPrompt continuous sync. For a one time export, it is recommended to use a release binary.

If you’d like to pass custom flags, it is recommended to override the entry-point such as with --entrypoint with /ccloud-schema-exporter at the beginning of the override.

For Docker, the latest tag will build directly from master. The master branch of this project is kept non-breaking; However, for stable images tag a release.

Run

./ccloud-schema-exporter -batchExport : Running the app with this flag will perform a batch export. Starting v1.1, -batchExport can be declared with -syncDeletes to perform an export of soft deleted schemas.
./ccloud-schema-exporter -sync : Running the app with this flag will start a continuous sync between the source and destination schema registries.
./ccloud-schema-exporter -getLocalCopy : Running the app with this flag will get a snapshot of your Schema Registry into local files with naming structure subjectName-version-id-schemaType per schema. The default directory is {currentPath}/SchemaRegistryBackup/.
./ccloud-schema-exporter -fromLocalCopy : Running the app with this flag will write schemas previously fetched. It relies on the naming convention of -getLocalCopy to obtain the necessary metadata to register the schemas. The default directory is {currentPath}/SchemaRegistryBackup/. The file lookup is recursive from the specified directory.
./ccloud-schema-exporter -schemaLoad : Running the app with this flag will write schemas from the filesystem. The schema loader respects references. For more information on behavior, see the Schema Load section.

When multiple flags are applied, precedence is sync → batchExport → getLocalCopy → fromLocalCopy → schemaLoad

Note	Given that the exporter cannot determine a per-subject compatibility rule, it is recommended to set the destination schema registry compatibility level to `NONE` on first sync and restore it to the source’s level afterwards.

Options

Usage of ./ccloud-schema-exporter:

  -allowList value
    	A comma delimited list of schema subjects to allow. It also accepts paths to a file containing a list of subjects.
  -batchExport
    	Perform a one-time export of all schemas
  -customDestination string
    	Name of the implementation to be used as a destination (same as mapping)
  -customSource string
    	Name of the implementation to be used as a source (same as mapping)
  -deleteAllFromDestination
    	Setting this will run a delete on all schemas written to the destination registry. No respect for allow/disallow lists.
  -dest-sr-key string
    	API KEY for the Destination Schema Registry Cluster
  -dest-sr-secret string
    	API SECRET for the Destination Schema Registry Cluster
  -dest-sr-url string
    	Url to the Destination Schema Registry Cluster
  -disallowList value
    	A comma delimited list of schema subjects to disallow. It also accepts paths to a file containing a list of subjects.
  -fromLocalCopy
    	Registers all local schemas written by getLocalCopy. Defaults to a folder (SchemaRegistryBackup) in the current path of the binaries.
  -getLocalCopy
    	Perform a local back-up of all schemas in the source registry. Defaults to a folder (SchemaRegistryBackup) in the current path of the binaries.
  -localPath string
    	Optional custom path for local functions. This must be an existing directory structure.
  -noPrompt
    	Set this flag to avoid checks while running. Assure you have the destination SR to correct Mode and Compatibility.
  -schemaLoad string
        Schema Type for the load. Currently supported: AVRO
  -scrapeInterval int
    	Amount of time ccloud-schema-exporter will delay between schema sync checks in seconds (default 60)
  -src-sr-key string
    	API KEY for the Source Schema Registry Cluster
  -src-sr-secret string
    	API SECRET for the Source Schema Registry Cluster
  -src-sr-url string
    	Url to the Source Schema Registry Cluster
  -sync
    	Sync schemas continuously
  -syncDeletes
    	Setting this will sync soft deletes from the source cluster to the destination
  -syncHardDeletes
    	Setting this will sync hard deletes from the source cluster to the destination
  -timeout int
    	Timeout, in seconds, to use for all REST calls with the Schema Registries (default 60)
  -usage
    	Print the usage of this tool
  -version
    	Print the current version and exit
  -withMetrics
    	Exposes metrics for the application in Prometheus format on :9020/metrics

Example Usage

export SRC_SR_URL=XXXX
export SRC_API_KEY=XXXX
export SRC_API_SECRET=XXXX
export DST_SR_URL=XXXX
export DST_API_KEY=XXXX
export DST_API_SECRET=XXXX
./ccloud-schema-exporter <-sync | -batchExport | -getLocalCopy | -fromLocalCopy>

Filtering the export

It is now possible to filter the subjects which are sync-ed in all modes (←sync | -batchExport | -getLocalCopy | -fromLocalCopy>). Setting -allowList or/and -disallowList flags will accept either a comma delimited string, or a file containing comma delimited entries for subject names (keep in mind these subjects must have their postfixes such as -value or -key to match the topic schema). These lists will be respected with all run modes. If specifying a file, make sure it has an extension (such as .txt). A subject specified in -disallowList and -allowList will be disallowed by default.

Note	Lists aren’t respected with the utility `-deleteAllFromDestination`

A note on syncing hard deletions

Starting v1.1, ccloud-schema-exporter provides an efficient way of syncing hard deletions. In previous versions, this was done through inefficient lookups.

Support for syncing hard deletions applies when the source and destination are both a Confluent Cloud Schema Registry or Confluent Platform 6.1+.

Note

With regular -syncDeletes, the exporter will attempt to sync previously soft-deleted schemas to the destination. This functionality also only applies to Confluent Cloud or Confluent Platform 6.1+; However, if it is not able to perform this sync it will just keep syncing soft deletes it detects in the future.

Non-Interactive Run

ccloud-schema-exporter is meant to be run in a non-interactive way. However, it does include some checks to assure things go smoothly in the replication flow. You can disable these checks by setting the configuration -noPrompt. By default, the docker image has this in its entry point.

There are three checks made:

The destination schema registry is in IMPORT mode. This is a requirement, otherwise the replication won’t work.
When syncing hard deletions, both clusters are Confluent Cloud Schema Registries. This is a requirement.
The destination schema registry is in NONE global compatibility mode.

This is not a requirement, but suggested since per-subject compatibility rules cannot be determined per version. Not setting this may result in some versions not being able to be registered since they do not adhere to the global compatibility mode. (The default compatibility in Confluent Cloud is BACKWARD).

If you’d like more info on how to change the Schema Registry mode to enable non-interactive runs, see the Schema Registry API Documentation

Extendability: Custom Sources and Destinations

ccloud-schema-exporter supports custom implementations of sources and destinations. If you’d like to leverage the already built back-end, all you have to do is an implementation of the CustomSource or CustomDestination interfaces. A copy of the interface definitions is below for convenience:

type CustomSource interface {
	// Perform any set-up behavior before start of sync/batch export
	SetUp() error
	// An implementation should handle the retrieval of a schema from the source.
	GetSchema(subject string, version int64) (id int64, stype string, schema string, references []SchemaReference, err error)
	// An implementation should be able to send exactly one map describing the state of the source
	// This map should be minimal. Describing only the Subject and Versions that exist.
	GetSourceState() (map[string][]int64, error)
	// Perform any tear-down behavior before stop of sync/batch export
	TearDown() error
}

type CustomDestination interface {
	// Perform any set-up behavior before start of sync/batch export
	SetUp() error
	// An implementation should handle the registration of a schema in the destination.
	// The SchemaRecord struct provides all details needed for registration.
	RegisterSchema(record SchemaRecord) error
	// An implementation should handle the deletion of a schema in the destination.
	// The SchemaRecord struct provides all details needed for deletion.
	DeleteSchema(record SchemaRecord) error
	// An implementation should be able to send exactly one map describing the state of the destination
	// This map should be minimal. Describing only the Subject and Versions that already exist.
	GetDestinationState() (map[string][]int64, error)
	// Perform any tear-down behavior before stop of sync/batch export
	TearDown() error
}

Golang isn’t candid on a runtime lookup of implementations of interfaces, so in order to make this implementation to the tool you must register it. To register your implementation, go into cmd/ccloud-schema-exporter/ccloud-schema-exporter.go and modify the following maps:

var sampleDestObject = client.NewSampleCustomDestination()
var customDestFactory = map[string]client.CustomDestination{
	"sampleCustomDestination": &sampleDestObject,
	// Add here a mapping of name -> customDestFactory/empty struct for reference at runtime
	// See sample above for the built-in sample custom destination that is within the client package
}
var apicurioObject = client.NewApicurioSource()
var customSrcFactory = map[string]client.CustomSource{
	"sampleCustomSourceApicurio": &apicurioObject,
	// Add here a mapping of name -> customSrcFactory/empty struct for reference at runtime
	// See sample above for the built-in sample custom source that is within the client package
}

You will see that these maps already have one entry, that is because ccloud-schema-exporter comes with sample implementations of the interface under cmd/internals/customDestination.go and cmd/internals/customSource.go, check them out!

For the custom source example, there is an implementation to allow sourcing schemas from Apicurio into Schema Registry. It defaults to looking for Apicurio in http://localhost:8081, but you can override it by providing a mapping apicurioUrl=http://yourUrl:yourPort in the environment variable APICURIO_OPTIONS. (if you’d like to pass more headers to the Apicurio calls, you can do so through the same env variable by separating them through a semi-colon such as apicurioUrl=http://yourUrl:yourPort;someHeader=someValue) Note: The schemas get exported using record names (all treated as -value), so you’ll want to use the RecordNameStrategy in Schema Registry clients to use the newly exported schemas!

Once added, all you have to do is indicate you will want to run with a custom source/destination with the -customSource | -customDestination flag. The value of this flag must be the name you gave it in the factory mapping.

The following options are respected for custom sources / destinations as well:

  -allowList value
    	A comma delimited list of schema subjects to allow. It also accepts paths to a file containing a list of subjects.
  -batchExport
    	Perform a one-time export of all schemas
  -disallowList value
    	A comma delimited list of schema subjects to disallow. It also accepts paths to a file containing a list of subjects.
  -scrapeInterval int
    	Amount of time ccloud-schema-exporter will delay between schema sync checks in seconds (default 60)
  -sync
    	Sync schemas continuously
  -syncDeletes
    	Setting this will sync soft deletes from the source cluster to the destination

Schema Loads

ccloud-schema-exporter supports AVRO schema loads through defining a -schemaLoad and -localPath, the tool will register all avro schemas it finds recursively in that path, including references. It will utilize the RecordNamingStrategy to name the subjects.

Schema Loads support schema versioning. All versions of a schema will be registered. Versions are decided according to the lexicographical order of the files (for example, a file named orders_v1 will be registered before orders_v2). References are also versioned; However, only the latest version of reference will be referenced by other schemas.

Schema References in AVRO are supported in the following format (in-line references are supported by default already):

{
   "type" : "record",
   "namespace" : "io.leal.abraham",
   "name" : "myRecord",
   "fields" : [
      { "name" : "Name" , "type" : ["null", "io.leal.abraham.anotherReference"], "default": null },
      { "name" : "Age" , "type" : "io.leal.abraham.singleReference" }
   ]
}

Where io.leal.abraham.anotherReference and io.leal.abraham.singleReference are both the full names to referenced records that also live within the path being transversed. ccloud-schema-exporter will ensure those references are registered first to Schema Registry and are correctly set in the ultimate registration of the referencing schema.

This feature also supports allow and disallow lists.

Monitoring

When specified with -withMetrics, ccloud-schema-exporter will export health metrics on :9020/metrics. These metrics are in Prometheus format for ease of parse. A sample Grafana dashboard is under the samples directory.

Feature Requests / Issue Reporting

This repo tracks feature requests and issues through Github Issues. If you’d like to see something fixed that was not caught by testing, or you’d like to see a new feature, please feel free to file a Github issue in this repo, I’ll review and answer at best effort.

Additionally, if you’d like to contribute a fix/feature, please feel free to open a PR for review.

Name		Name	Last commit message	Last commit date
Latest commit History 132 Commits
cmd		cmd
samples		samples
.gitignore		.gitignore
.travis.yml		.travis.yml
Dockerfile		Dockerfile
LICENSE		LICENSE
README.adoc		README.adoc
go.mod		go.mod
go.sum		go.sum

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Schema Exporter for Confluent Schema Registry

Build

Docker Run

Run

Options

Example Usage

Filtering the export

A note on syncing hard deletions

Non-Interactive Run

Extendability: Custom Sources and Destinations

Schema Loads

Monitoring

Feature Requests / Issue Reporting

About

Releases

Packages

Languages

License

KOR-Financial/ccloud-schema-exporter

Folders and files

Latest commit

History

Repository files navigation

Schema Exporter for Confluent Schema Registry

Build

Docker Run

Run

Options

Example Usage

Filtering the export

A note on syncing hard deletions

Non-Interactive Run

Extendability: Custom Sources and Destinations

Schema Loads

Monitoring

Feature Requests / Issue Reporting

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages