Skip to content

Latest commit

 

History

History
48 lines (25 loc) · 2.8 KB

PORTWORX_CONFIG.md

File metadata and controls

48 lines (25 loc) · 2.8 KB

Obtaining the Portworx configuration

This module requires a Portworx configuration. Portworx is available in 2 flavors: Enterprise and Essentials.

  • Portworx Essentials is free forever, but only supports a maximum of 5 nodes on a cluster, 200 volumes, and 5TB of storage.
  • Portworx Enterprise requires a subscription (has 30 day free trial), supports over 1000 nodes per cluster, and has unlimited storage.

The instructions below provide the steps required to obtain the configuration values needed to deploy Portworx in a cluster

Essentials

  1. Launch the spec generator

  2. Press Continue on the Portworx Enterprise product.

  3. Select the Portworx Essentials license radio button and press Continue.

  4. Check Use the Portworx Operator box, select the Portworx version as 2.6 then press Next.

  5. Select Cloud for the Select your environment option then select AWS or Azure for the Cloud Platform, as appropriate. Next select the Create Using a Spec option for Select type of disk. Leave the Volume type as Premium and enter a value of 1000 for Size (GB). Press Next to continue.

  6. Leave auto as the value for Data Network Interface and Management Network Interface then press Next.

  7. Select Openshift 4+ as Container service then go to Advanced Settings. Check Enable Stork, Enable CSI, Enable Monitoring, and Enable Telemetry then press Finish.

  8. Click Download to download a copy of the spec file.

Enterprise

  1. Launch the spec generator

  2. Press Continue on the Portworx Enterprise product.

  3. Select the Portworx Enterprise license radio button and press Continue.

  4. Select the Portworx Enterprise license radio button and press Continue.

  5. Check Use the Portworx Operator box, select the Portworx version as 2.6 and ETCD as Built-in then press Next.

  6. Select Cloud for the Select your environment option then select AWS or Azure for the Cloud Platform, as appropriate. Next select the Create Using a Spec option for Select type of disk. Leave the Volume type as Premium and enter a value of 1000 for Size (GB). Press Next to continue.

  7. Leave auto as the value for Data Network Interface and Management Network Interface then press Next.

  8. Select Openshift 4+ as Container service then go to Advanced Settings. Check Enable Stork, Enable CSI, Enable Monitoring, and Enable Telemetry then press Finish.

  9. Select Openshift 4+ as Container service then go to Advanced Settings. Check Enable Stork, Enable CSI, Enable Monitoring, and Enable Telemetry then press Finish.

  10. Click Download to download a copy of the spec file.