Plunge-cut saw saw blades

Now also available in dia. 168 mm

New circular saw blades. Perfect results.

 

  • Work up to twice as fast – with consistently perfect cutting quality. Thanks to reduced cutting width and new tooth shapes.
  • Low costs due to longer service life. Thanks to special geometry and high-quality carbide saw teeth.
  • You can always rely on a perfect cut. Completely smooth running and splinter-free cutting edges.
  • Work even healthier. The reduced cutting width and thus less material chipping ensure lower dust levels.

    Sawing applications

    • Saw blades for plunge-cut saws – WOOD FINE CUT

      WOOD FINE CUT

      The fine-cut blade for clean and splinter-free cross cuts in solid wood, laminated or veneered sheet materials and acrylic glass.
    • Saw blades for plunge-cut saws – WOOD UNIVERSAL

      WOOD UNIVERSAL

      The all-rounder for working with all types of wood and wood materials, as well as building panels and soft plastics.
    • Saw blades for plunge-cut saws – WOOD RIP CUT

      WOOD RIP CUT

      For fast working with little effort, especially for rip cuts on solid wood. Suitable for both hardwood and softwood.
    • Saw blades for plunge-cut saws – LAMINATE/HPL

      LAMINATE/HPL

      Ideal for laminate and melamine-resin-bonded panels (such as Trespa®).
    • Saw blades for plunge-cut saws – ALUMINIUM PLASTICS

      ALUMINIUM/PLASTICS

      Highly suitable for aluminium sheets and profiles as well as fibre-reinforced and hard plastics.
    • Saw blades for plunge-cut saws – ABRASIVE MATERIALS

      ABRASIVE MATERIALS

      The problem solver for cement and gypsum-bonded chipboard and fibreboard.

    Performance features

    • Working progress

      Saw up to twice as fast and save time.

      +
      Sawing progress

    • Running metre per battery charge

      Saw for longer with just one battery charge.

      +
      Running metre battery charge

    • Saw blade service life

      Significantly longer service life with consistent cutting quality.

      +
      Service life

    1. Test result depends on material and condition

    2. Relative values, indexed to 100 and based on the Festool Z48/2.2 mm saw blade

    Tooth shapes

    Tooth shapes – cross-cut tooth

    Cross-cut tooth

    The teeth are slanted on the left and right and cut alternately. This reduces the load on the individual teeth. This causes the saw blade to run smoothly and have a longer service life. In addition, this toothing ensures ideal cutting quality.

    Tooth shapes – trapezoidal cross-cut tooth

    Trapezoidal cross-cut tooth

    In addition to the cross-cut teeth, a "trapezoidal tooth" is used. This relieves the cross-cut teeth and ensures a high and even running smoothness as well as a long service life. Excellent cutting quality is also achieved here.

    Tooth shapes – trapezoidal flat tooth

    Trapezoidal flat tooth

    Trapezoidal and flat teeth are arranged alternately. The trapezoidal tooth is responsible for sawing progress, while the flat tooth ensures a clean cutting edge. The robust toothing results in a longer saw blade service life.

    Tooth shapes – Flat tooth with variable chamfer

    Flat tooth with variable chamfer

    The flat teeth are slanted on the left and right and cut alternately, thus relieving the individual teeth. This results in a consistent quality and a longer service life.

    Tooth shapes – flat tooth

    Flat tooth

    The cutting edges of the teeth are straight. This makes the toothing robust. Each tooth cuts in the same way and is therefore used for hard materials such as steel and abrasive materials.

    Tool compatibility

    Compatibility for plunge-cut saws

    Product
    WOOD
    FINE CUT    		  
    WOOD
    UNIVERSAL    		  
    WOOD
    STANDARD    		  
    WOOD
    RIP CUT    		  
    LAMINATE/
    HPL    		  
    ALUMINIUM/
    PLASTICS    		  
    STEEL
         		  
    ABRASIVE
    MATERIALS
    Cutting width 1.8 mm 2.2 mm 1.8 mm 2.4 mm 1.8 mm 2.2 mm 1.8 mm 2.4 mm 1.8 mm 2.2 mm 2.6 mm 1.8 mm 2.2 mm 1.8 mm 2.6 mm 1.8 mm 2.2 mm 1.8 mm 2.4 mm 1.8 mm 2.2 mm 1.8 mm 2.4 mm 2.2 mm  1.8 mm 2.2 mm 1.8 mm
    Item HW
    160 x 1.8 x 20
    WD42    		 HW
    160 x 2.2 x 20
    WD48    		 HW
    168 x 1.8 x 20
    W42    		 HW
    210 x 2.4 x 30
    W52    		 HW
    160 x 1.8 x 20
    W28    		 HW
    160 x 2.2 x 20
    W28    		 HW
    168 x 1.8 x 20
    W28    		 HW
    210 x 2.4 x 30
    W36    		 HW
    160 x 1.8 x 20
    W18    		 HW
    160 x 2.2 x 20
    W18    		 HW
    210 x 2.6 x 30
    W18    		 HW
    160 x 1.8 x 20
    PW12    		 HW
    160 x 2.2 x 20
    PW12    		 HW
    168 x 1.8 x 20
    PW16    		 HW
    210 x 2.6 x 30
    PW16    		 HW
    160 x 1.8 x 20
    TF52    		 HW
    160 x 2.2 x 20
    TF48    		 HW
    168 x 1.8 x 20
    TF52 L    		 HW
    210 x 2.4 x 30
    TF60    		 HW
    160 x 1.8 x 20
    F/FA52    		 HW
    160 x 2.2 x 20
    TF48    		 HW
    168 x 1.8 x 20
    F/FA52 A    		 HW
    210 x 2.4 x 30
    TF72    		 HW
    210 x 2.2 x 30
    F36    		  DIA
    160 x 1.8 x 20
    F4    		  
    160 x 2.2 x 20
    DIA 4    		 DIA
    168 x 1.8 x 20
    F4 
    Product number 205553 491952 205765 493199 205551 496302 205764 493198 500458 768129 493197 205550 496301 205763 493196 205554 496308 205766 493200 205555 496306 205767 493201 493351 205558 201910 205769
     TS 55 R (2012 – April 2021)   X       X       X     X       X       X         X  
     TS 55 F (from April 2021) X       X       X     X       X       X         X    
     TSC 55 (2014 – April 2021)   X       X       X     X       X       X         X  
     TSC 55 K (from April 2021) X       X       X     X       X       X         X    
     TS 60 K     X       X             X       X       X         X
     TSV 60 K     X       X             X       X       X         X
     TS 75       X       X     X       X       X       X X      

    Compatibility for circular saws

    Product
    WOOD
    FINE CUT    		  
    WOOD
    UNIVERSAL    		  
    WOOD
    STANDARD    		  
    WOOD
    RIP CUT    		  
    LAMINATE/
    HPL    		  
    ALUMINIUM/
    PLASTICS    		  
    STEEL
     
    Cutting width 1.8 mm 2.5 mm 1.8 mm 1.8 mm 2.5 mm 1.8 mm 2.5 mm 1.8 mm 1.8 mm 2.5 mm 2.5 mm 
    Item HW
    160 x 1.8 x 20
    WD42    		 HW
    230 x 2.5 x 30
    W48    		 HW
    160 x 1.8 x 20
    W28    		 HW
    160 x 1.8 x 20
    W18    		 HW
    230 x 2.5 x 30
    W24     		 HW
    160 x 1.8 x 20
    PW12    		 HW
    230 x 2.5 x 30
    PW18    		 HW
    160 x 1.8 x 20
    TF52    		 HW
    160 x 1.8 x 20
    F/FA52    		 HW
    230 x 2.5 x 30
    TF76    		 HW
    230 x 2.5 x 30
    F48
    Product number 205553 500648 205551 500458 500647 205550 500646 205554 205555 500649 500651
    HK 55 X   X X   X   X X    
    HKC 55 X   X X   X   X X    
     HK 85   X     X   X     X X

    Compatibility for compound mitre saws

    Product
    WOOD
    FINE CUT    		  
    WOOD
    UNIVERSAL    		  
    LAMINATE/
    HPL    		  
    ALUMINIUM/
    PLASTICS
    Cutting width 2.3 mm  2.3 mm 2.5 mm 2.3 mm  2.5 mm 2.3 mm  2.5 mm 2.3 mm  2.3 mm 2.4 mm
    Item HW
    216 x 2.3 x 30
    W48    		 HW
    216 x 2.3 x 30
    W60    		 HW
    260 x 2.5 x 30
    W80     		 HW
    216 x 2.3 x 30
    W36    		 HW
    260 x 2.5 x 30
    W60     		 HW
    216 x 2.3 x 30
    WZ/FA60    		 HW
    260 x 2.5 x 30
    WZ/FA64     		 HW
    216 x 2.3 x 30
    TF60    		 HW
    216 x 2.3 x 30
    TF64    		 HW
    260 x 2.4 x 30
    TF68 
    Product number 491050 500125 494605 500124 494604 500123 494606 491051 500122 494607
     SYM 70 (until 2023) X             X    
     SYM C 70 (from 2023) X             X    
     KS 60   X   X   X     X  
     KSC 60   X   X   X     X  
     KS 88     X   X   X     X
     KS 120     X   X   X     X

    Compatibility for table saws

    Product
    WOOD
    FINE CUT    		  
    WOOD
    UNIVERSAL    		  
    WOOD
    RIP CUT    		  
    LAMINATE/
    HPL    		  
    ALUMINIUM/
    PLASTICS
    Cutting width 1.8 mm 2.4 mm 2.6 mm 2.4 mm 1.8 mm 2.6 mm 2.6 mm 2.4 mm 1.8 mm 2.6 mm 2.6 mm 2.4 mm 1.8 mm 2.6 mm 2.6 mm 2.4 mm 1.8 mm 2.6 mm 2.6 mm 2.4 mm
    Item HW
    168 x 1.8 x 20
    W42    		 HW
    190 x 2.4 FF
    W28    		 HW
    225 x 2.6 x 30
    W48    		 HW
    254 x 2.4 x 30
    W60    		 HW
    168 x 1.8 x 20
    W28    		 HW
    190X2.6 FF
    W32    		 HW
    225 x 2.6 x 30
    W32    		 HW
    254 x 2.4 x 30
    W40    		 HW
    168 x 1.8 x 20
    PW16    		 HW
    190X2.6 FF
    PW16    		 HW
    225 x 2.6 x 30
    PW18    		 HW
    254 x 2.4 x 30
    PW24     		 HW
    168 x 1.8 x 20
    TF52 L    		 HW
    190X2.6 FF
    TF54    		 HW
    225 x 2.6 x 30
    TF64    		 HW
    254 x 2.4 x 30
    TF80 L    		 HW
    168 x 1.8 x 20
    F/FA52 A    		 HW
    190X2.6 FF
    TF58    		 HW
    225 x 2.6 x 30
    TF68    		 HW
    254 x 2.4 x 30
    TF80 A
    Product number 205765 492050 488289 575976 205764 492048 488288 575975 205763 492049 496303 575974 205766 492052 489459 575977 205767 492051 488291 575978
     CSC SYS 50 X       X       X       X       X      
     CS 50   X       X       X       X       X    
     CS 70     X       X       X       X       X  
     TKS 80       X       X       X       X       X

    Overview of saws

    Festool Order app

    Want to find saw blades easily and add them to your shopping list?

    Download the Festool Order app now and get started.
    Find out more

    FAQs

    Answers to frequently asked questions about the new saw blades.

    Can the saw blades with 1.8 mm cutting width also be used in conjunction with the HKC 55 and the HK 55?
    Yes, all 1.8 mm saw blades are also suitable for the HKC 55 and the HK 55. The only exception is the diamond saw blade for abrasive materials. This saw blade is only suitable for the TSC 55 K.
    Can the saw blades with 1.8 mm cutting width from Festool be resharpened?
    Yes, our saw blades can be resharpened up to ten times.
    Can the saw blades with 1.8 mm cutting width be used on the TS 55 R and TSC 55?
    No, because the TS 55 R, as well as the TSC 55, is wider (2.2 mm cutting width) than the cutting width of the new saw blades (1.8 mm cutting width).
    Can the saw blades with 2.2 mm cutting width be used on the TSC 55 K?
    Only saw blades with 1.8 mm cutting width may be used with the TSC 55 K.
    Can the TS 55 R and TSC 55 riving knife be retrofitted so that the new saw blades (1.8 mm cutting width) can be used?
    The TS 55 R and TSC 55 were not designed to use the new saw blades and should not be used with these models.