# cat /sys/fs/pstore/*
[    0.634727] pci-pf-stub 0000:00:04.0: writing to VF config space
[    0.634791] pci-pf-stub 0000:00:05.0: writing to VF config space
[    0.653586] ahci 0001:00:00.0: writing to VF config space
[    0.661221] al_eth 0000:00:00.0: writing to VF config space
[    0.672933] al_eth 0000:00:01.0: writing to VF config space
[    2.355048] al_eth 0000:00:02.0: writing to VF config space
[    2.366822] al_eth 0000:00:03.0: writing to VF config space
[   13.657801] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
[   13.666651] Mem abort info:
[   13.669470]   ESR = 0x96000005
[   13.672555]   Exception class = DABT (current EL), IL = 32 bits
[   13.678526]   SET = 0, FnV = 0
[   13.681604]   EA = 0, S1PTW = 0
[   13.684771] Data abort info:
[   13.687707]   ISV = 0, ISS = 0x00000005
[   13.691568]   CM = 0, WnR = 0
[   13.694565] user pgtable: 4k pages, 39-bit VAs, pgdp = 0000000076ee439d
[   13.701228] [0000000000000020] pgd=0000000000000000, pud=0000000000000000
[   13.708042] Internal error: Oops: 96000005 [#1] SMP
[   13.712969] Modules linked in: ubnt_common(PFO)
[   13.717525] Process modprobe (pid: 397, stack limit = 0x000000008a70b7f8)
[   13.724361] CPU: 0 PID: 397 Comm: modprobe Tainted: PF          O      4.19.152-edge1 #1
[   13.732498] Hardware name: Annapurna Labs Alpine V2 UBNT (DT)
[   13.738266] pstate: a0000005 (NzCv daif -PAN -UAO)
[   13.743084] pc : ref_module+0x48/0x148
[   13.746888] lr : resolve_symbol.isra.33+0xa0/0x104
[   13.751701] sp : ffffff8009f6bbc0
[   13.755067] x29: ffffff8009f6bbc0 x28: ffffff8000b2a598
[   13.760401] x27: ffffff800a17422c x26: ffffff8000b226c8
[   13.765736] x25: ffffff800a17f0b8 x24: ffffff8000b223c0
[   13.771098] x23: ffffff8009f6bd70 x22: ffffff80009df2b8
[   13.776432] x21: ffffff80009e4080 x20: ffffff80009e4378
[   13.781793] x19: ffffff8000b223c0 x18: 0000000000000080
[   13.787126] x17: 0000000000000000 x16: 0000000000000000
[   13.792486] x15: 5400160b13131717 x14: ff00000000000000
[   13.797820] x13: 0000000000000000 x12: 0000000000000007
[   13.803180] x11: 0000000000000030 x10: 0101010101010101
[   13.808514] x9 : 0000000000000003 x8 : 7f7f7f7f7f7f7f7f
[   13.813875] x7 : 6bff636064715e6d x6 : 0000000000008018
[   13.819209] x5 : 1800000000000000 x4 : 0080000000000000
[   13.824570] x3 : 0075000000000000 x2 : 1e5f97317a6c3900
[   13.829903] x1 : ffffff80009e4080 x0 : 0000000000000000
[   13.835263] Call trace:
[   13.837737]  ref_module+0x48/0x148
[   13.841162]  resolve_symbol.isra.33+0xa0/0x104
[   13.845628]  load_module+0x12a4/0x22c0
[   13.849428]  __se_sys_finit_module+0xc4/0xd8
[   13.853721]  __arm64_sys_finit_module+0x24/0x30
[   13.858302]  el0_svc_handler+0xc8/0x1a8
[   13.862161]  el0_svc+0x8/0xc4
[   13.865154] Code: 1400000d f9400000 eb14001f 54000140 (f9401001)
[   13.871296] ---[ end trace 5b1617a0f5a1cae1 ]---
[   13.879554] Kernel panic - not syncing: Fatal exception
[   13.884830] SMP: stopping secondary CPUs
[   13.888794] Kernel Offset: disabled
[   13.892306] CPU features: 0x0,20006008
[   13.896106] Memory Limit: none
[   13.902800] Rebooting in 3 seconds..



# dmesg
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd073]
[    0.000000] Linux version 4.19.152-al-linux-v10.2.0-v1.11.0-16.3888-5f7070d (builder@link-xenial-builder) (gcc version 6.4.0 (Buildroot 0.9.0.0)) #1 SMP Wed Oct 6                                                                         10:39:09 UTC 2021
[    0.000000] Machine model: Annapurna Labs Alpine V2 UBNT
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] On node 0 totalpages: 1048575
[    0.000000]   DMA32 zone: 12288 pages used for memmap
[    0.000000]   DMA32 zone: 0 pages reserved
[    0.000000]   DMA32 zone: 786431 pages, LIFO batch:63
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] random: get_random_bytes called from start_kernel+0x9c/0x3f0 with crng_init=0
[    0.000000] percpu: Embedded 21 pages/cpu s45464 r8192 d32360 u86016
[    0.000000] pcpu-alloc: s45464 r8192 d32360 u86016 alloc=21*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.000000] CPU features: enabling workaround for EL2 vector hardening
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1032191
[    0.000000] Kernel command line: root=/dev/sdb2 rootfstype=squashfs rootwait pci=pcie_bus_perf console=ttyS0,115200 panic=3 reboot=warm
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB)
[    0.000000] Memory: 4042144K/4194300K available (8572K kernel code, 688K rwdata, 2396K rodata, 576K init, 316K bss, 152156K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000f0280000
[    0.000000] arch_timer: cp15 timer(s) running at 58.33MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1ae82a6a7f, max_idle_ns: 881590413063 ns
[    0.000002] sched_clock: 56 bits at 58MHz, resolution 17ns, wraps every 4398046511097ns
[    0.000136] Console: colour dummy device 80x25
[    0.000147] Calibrating delay loop (skipped), value calculated using timer frequency.. 116.66 BogoMIPS (lpj=233333)
[    0.000152] pid_max: default: 32768 minimum: 301
[    0.000205] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.000219] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.000678] ASID allocator initialised with 32768 entries
[    0.000707] rcu: Hierarchical SRCU implementation.
[    0.000924] EFI services will not be available.
[    0.001001] smp: Bringing up secondary CPUs ...
[    0.001150] Detected PIPT I-cache on CPU1
[    0.001164] GICv3: CPU1: found redistributor 1 region 0:0x00000000f02a0000
[    0.001175] CPU1: Booted secondary processor 0x0000000001 [0x411fd073]
[    0.001347] Detected PIPT I-cache on CPU2
[    0.001356] GICv3: CPU2: found redistributor 2 region 0:0x00000000f02c0000
[    0.001365] CPU2: Booted secondary processor 0x0000000002 [0x411fd073]
[    0.001533] Detected PIPT I-cache on CPU3
[    0.001542] GICv3: CPU3: found redistributor 3 region 0:0x00000000f02e0000
[    0.001550] CPU3: Booted secondary processor 0x0000000003 [0x411fd073]
[    0.001577] smp: Brought up 1 node, 4 CPUs
[    0.001579] SMP: Total of 4 processors activated.
[    0.001582] CPU features: detected: GIC system register CPU interface
[    0.001584] CPU features: detected: 32-bit EL0 Support
[    0.001601] CPU: All CPU(s) started at EL2
[    0.001609] alternatives: patching kernel code
[    0.002138] devtmpfs: initialized
[    0.003989] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.003995] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.004181] DMI not present or invalid.
[    0.004300] NET: Registered protocol family 16
[    0.004617] cpuidle: using governor menu
[    0.004712] DMA: preallocated 256 KiB pool for atomic allocations
[    0.004749] Initializing Peripheral Bus System - PBS
[    0.018202] console [pstore-1] enabled
[    0.018250] pstore: Registered ramoops as persistent store backend
[    0.018253] ramoops: attached 0x18000@0x10000000, ecc: 16/0
[    0.021692] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.021908] vgaarb: loaded
[    0.021978] SCSI subsystem initialized
[    0.022028] libata version 3.00 loaded.
[    0.022083] usbcore: registered new interface driver usbfs
[    0.022096] usbcore: registered new interface driver hub
[    0.022112] usbcore: registered new device driver usb
[    0.025019] pps_core: LinuxPPS API ver. 1 registered
[    0.025021] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.025026] PTP clock support registered
[    0.025058] Advanced Linux Sound Architecture Driver Initialized.
[    0.025201] Bluetooth: Core ver 2.22
[    0.025212] NET: Registered protocol family 31
[    0.025214] Bluetooth: HCI device and connection manager initialized
[    0.025217] Bluetooth: HCI socket layer initialized
[    0.025220] Bluetooth: L2CAP socket layer initialized
[    0.025229] Bluetooth: SCO socket layer initialized
[    0.025341] clocksource: Switched to clocksource arch_sys_counter
[    0.027416] NET: Registered protocol family 2
[    0.027600] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    0.027611] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.027693] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.027816] TCP: Hash tables configured (established 32768 bind 32768)
[    0.027863] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.027879] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.027945] NET: Registered protocol family 1
[    0.028099] PCI: CLS 0 bytes, default 64
[    0.028465] Initialise system trusted keyrings
[    0.028521] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    0.030492] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.561880] Key type asymmetric registered
[    0.561883] Asymmetric key parser 'x509' registered
[    0.561899] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.561902] io scheduler noop registered
[    0.561904] io scheduler deadline registered
[    0.561950] io scheduler cfq registered (default)
[    0.561952] io scheduler mq-deadline registered
[    0.561954] io scheduler kyber registered
[    0.562168] pl061_gpio fd887000.gpio0: PL061 GPIO chip @0x00000000fd887000 registered
[    0.562248] pl061_gpio fd888000.gpio1: PL061 GPIO chip @0x00000000fd888000 registered
[    0.562324] pl061_gpio fd889000.gpio2: PL061 GPIO chip @0x00000000fd889000 registered
[    0.562401] pl061_gpio fd88a000.gpio3: PL061 GPIO chip @0x00000000fd88a000 registered
[    0.562474] pl061_gpio fd88b000.gpio4: PL061 GPIO chip @0x00000000fd88b000 registered
[    0.562548] pl061_gpio fd897000.gpio5: PL061 GPIO chip @0x00000000fd897000 registered
[    0.562635] al-sgpo fd8b4000.sgpo: Alpine SGPO driver probed.
[    0.562711] al-internal-pcie fbc00000.pcie-internal: host bridge /soc/pcie-internal ranges:
[    0.562720] al-internal-pcie fbc00000.pcie-internal:   MEM 0xfe000000..0xfeffffff -> 0xfe000000
[    0.562761] al-internal-pcie fbc00000.pcie-internal: PCI host bridge to bus 0000:00
[    0.562764] pci_bus 0000:00: root bus resource [bus 00]
[    0.562767] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfeffffff]
[    0.562778] pci 0000:00:00.0: [1c36:0002] type 00 class 0x020000
[    0.562788] pci 0000:00:00.0: reg 0x10: [mem 0xfe000000-0xfe01ffff 64bit]
[    0.562793] pci 0000:00:00.0: reg 0x18: [mem 0xfe020000-0xfe020fff 64bit]
[    0.562797] pci 0000:00:00.0: reg 0x20: [mem 0xfe030000-0xfe03ffff 64bit]
[    0.562816] pci 0000:00:00.0: PME# supported from D3hot D3cold
[    0.562824] pci 0000:00:00.0: reg 0x324: [mem 0x00000000-0x0001ffff 64bit]
[    0.562828] pci 0000:00:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0005ffff 64bit] (contains BAR0 for 3 VFs)
[    0.562964] pci 0000:00:01.0: [1c36:0001] type 00 class 0x020000
[    0.562973] pci 0000:00:01.0: reg 0x10: [mem 0xfe040000-0xfe05ffff 64bit]
[    0.562978] pci 0000:00:01.0: reg 0x18: [mem 0xfe060000-0xfe060fff 64bit]
[    0.562982] pci 0000:00:01.0: reg 0x20: [mem 0xfe064000-0xfe067fff 64bit]
[    0.562997] pci 0000:00:01.0: PME# supported from D3hot D3cold
[    0.563090] pci 0000:00:02.0: [1c36:0002] type 00 class 0x020000
[    0.563099] pci 0000:00:02.0: reg 0x10: [mem 0xfe080000-0xfe09ffff 64bit]
[    0.563103] pci 0000:00:02.0: reg 0x18: [mem 0xfe0a0000-0xfe0a0fff 64bit]
[    0.563108] pci 0000:00:02.0: reg 0x20: [mem 0xfe0b0000-0xfe0bffff 64bit]
[    0.563123] pci 0000:00:02.0: PME# supported from D3hot D3cold
[    0.563131] pci 0000:00:02.0: reg 0x324: [mem 0x00000000-0x0001ffff 64bit]
[    0.563134] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x0005ffff 64bit] (contains BAR0 for 3 VFs)
[    0.563231] pci 0000:00:03.0: [1c36:0001] type 00 class 0x020000
[    0.563240] pci 0000:00:03.0: reg 0x10: [mem 0xfe0c0000-0xfe0dffff 64bit]
[    0.563244] pci 0000:00:03.0: reg 0x18: [mem 0xfe0e0000-0xfe0e0fff 64bit]
[    0.563249] pci 0000:00:03.0: reg 0x20: [mem 0xfe0e4000-0xfe0e7fff 64bit]
[    0.563263] pci 0000:00:03.0: PME# supported from D3hot D3cold
[    0.563349] pci 0000:00:04.0: [1c36:0022] type 00 class 0x100000
[    0.563357] pci 0000:00:04.0: reg 0x10: [mem 0xfe100000-0xfe11ffff 64bit]
[    0.563363] pci 0000:00:04.0: reg 0x20: [mem 0xfe120000-0xfe12ffff 64bit]
[    0.563379] pci 0000:00:04.0: PME# supported from D3hot D3cold
[    0.563387] pci 0000:00:04.0: reg 0x324: [mem 0x00000000-0x0001ffff 64bit]
[    0.563390] pci 0000:00:04.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR0 for 1 VFs)
[    0.563483] pci 0000:00:05.0: [1c36:0022] type 00 class 0x010400
[    0.563491] pci 0000:00:05.0: reg 0x10: [mem 0xfe140000-0xfe15ffff 64bit]
[    0.563498] pci 0000:00:05.0: reg 0x20: [mem 0xfe160000-0xfe16ffff 64bit]
[    0.563512] pci 0000:00:05.0: PME# supported from D3hot D3cold
[    0.563521] pci 0000:00:05.0: reg 0x324: [mem 0x00000000-0x0001ffff 64bit]
[    0.563524] pci 0000:00:05.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR0 for 1 VFs)
[    0.563712] pci 0000:00:08.0: [1c36:0031] type 00 class 0x010601
[    0.563726] pci 0000:00:08.0: reg 0x24: [mem 0xfe170000-0xfe173fff]
[    0.563741] pci 0000:00:08.0: PME# supported from D3hot D3cold
[    0.564936] pci 0000:00:00.0: BAR 0: assigned [mem 0xfe000000-0xfe01ffff 64bit]
[    0.564942] pci 0000:00:00.0: BAR 7: assigned [mem 0xfe020000-0xfe07ffff 64bit]
[    0.564946] pci 0000:00:01.0: BAR 0: assigned [mem 0xfe080000-0xfe09ffff 64bit]
[    0.564950] pci 0000:00:02.0: BAR 0: assigned [mem 0xfe0a0000-0xfe0bffff 64bit]
[    0.564955] pci 0000:00:02.0: BAR 7: assigned [mem 0xfe0c0000-0xfe11ffff 64bit]
[    0.564958] pci 0000:00:03.0: BAR 0: assigned [mem 0xfe120000-0xfe13ffff 64bit]
[    0.564963] pci 0000:00:04.0: BAR 0: assigned [mem 0xfe140000-0xfe15ffff 64bit]
[    0.564967] pci 0000:00:04.0: BAR 7: assigned [mem 0xfe160000-0xfe17ffff 64bit]
[    0.564971] pci 0000:00:05.0: BAR 0: assigned [mem 0xfe180000-0xfe19ffff 64bit]
[    0.564975] pci 0000:00:05.0: BAR 7: assigned [mem 0xfe1a0000-0xfe1bffff 64bit]
[    0.564979] pci 0000:00:00.0: BAR 4: assigned [mem 0xfe1c0000-0xfe1cffff 64bit]
[    0.564983] pci 0000:00:02.0: BAR 4: assigned [mem 0xfe1d0000-0xfe1dffff 64bit]
[    0.564988] pci 0000:00:04.0: BAR 4: assigned [mem 0xfe1e0000-0xfe1effff 64bit]
[    0.564992] pci 0000:00:05.0: BAR 4: assigned [mem 0xfe1f0000-0xfe1fffff 64bit]
[    0.564996] pci 0000:00:01.0: BAR 4: assigned [mem 0xfe200000-0xfe203fff 64bit]
[    0.565001] pci 0000:00:03.0: BAR 4: assigned [mem 0xfe204000-0xfe207fff 64bit]
[    0.565005] pci 0000:00:08.0: BAR 5: assigned [mem 0xfe208000-0xfe20bfff]
[    0.565009] pci 0000:00:00.0: BAR 2: assigned [mem 0xfe20c000-0xfe20cfff 64bit]
[    0.565013] pci 0000:00:01.0: BAR 2: assigned [mem 0xfe20d000-0xfe20dfff 64bit]
[    0.565018] pci 0000:00:02.0: BAR 2: assigned [mem 0xfe20e000-0xfe20efff 64bit]
[    0.565022] pci 0000:00:03.0: BAR 2: assigned [mem 0xfe20f000-0xfe20ffff 64bit]
[    0.565050] pci-pf-stub 0000:00:04.0: writing to VF config space
[    0.565094] pci-pf-stub 0000:00:04.0: claimed by pci-pf-stub
[    0.565110] pci-pf-stub 0000:00:05.0: writing to VF config space
[    0.565176] pci-pf-stub 0000:00:05.0: claimed by pci-pf-stub
[    0.565252] al-external-pcie fd800000.pcie-external0: host bridge /soc/pcie-external0 ranges:
[    0.565261] al-external-pcie fd800000.pcie-external0:   err 0xfb600000..0xfb6fffff -> 0xfb600000
[    0.565267] al-external-pcie fd800000.pcie-external0:    IO 0xc0000000..0xc000ffff -> 0x00010000
[    0.565273] al-external-pcie fd800000.pcie-external0:   MEM 0xc0010000..0xc7ffffff -> 0xc0010000
[    0.565298] al-external-pcie fd800000.pcie-external0: link up: speed Gen 1 width x1
[    0.565301] al-external-pcie fd800000.pcie-external0: link up: speed Gen 1 width x1
[    0.565305] PCIe 0: setting OB iATU even after link is started
[    0.565385] al-external-pcie fd800000.pcie-external0: PCI host bridge to bus 0001:00
[    0.565388] pci_bus 0001:00: root bus resource [bus 00-ff]
[    0.565391] pci_bus 0001:00: root bus resource [??? 0xfb600000-0xfb6fffff flags 0x0]
[    0.565395] pci_bus 0001:00: root bus resource [io  0x0000-0xffff] (bus address [0x10000-0x1ffff])
[    0.565397] pci_bus 0001:00: root bus resource [mem 0xc0010000-0xc7ffffff]
[    0.565408] pci 0001:00:00.0: [1c36:0031] type 01 class 0x060400
[    0.565420] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[    0.565425] pci 0001:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff]
[    0.565430] pci 0001:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[    0.565463] pci 0001:00:00.0: supports D1
[    0.565466] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[    0.566548] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.566611] pci 0001:01:00.0: [1b21:1142] type 00 class 0x0c0330
[    0.566656] pci 0001:01:00.0: reg 0x10: [mem 0xc0000000-0xc0007fff 64bit]
[    0.566825] pci 0001:01:00.0: PME# supported from D3cold
[    0.566861] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0001:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[    0.567927] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[    0.567936] pci 0001:00:00.0: BAR 0: assigned [mem 0xc0100000-0xc01fffff]
[    0.567941] pci 0001:00:00.0: BAR 14: assigned [mem 0xc0200000-0xc02fffff]
[    0.567944] pci 0001:00:00.0: BAR 1: assigned [mem 0xc0010000-0xc001ffff]
[    0.567948] pci 0001:00:00.0: BAR 6: assigned [mem 0xc0020000-0xc002ffff pref]
[    0.567953] pci 0001:01:00.0: BAR 0: assigned [mem 0xc0200000-0xc0207fff 64bit]
[    0.567968] pci 0001:00:00.0: PCI bridge to [bus 01]
[    0.567971] pci 0001:00:00.0:   bridge window [mem 0xc0200000-0xc02fffff]
[    0.567980] pci 0001:00:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256
[    0.568004] pci 0001:01:00.0: Max Payload Size set to  256/ 512 (was  128), Max Read Rq  256
[    0.568007] pci 0001:00:00.0: AL PCIe bridge quirk detected, disable MSI(X)
[    0.568265] al_dma: Annapurna Labs DMA Driver 0.01
[    0.569082] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.569511] console [ttyS0] disabled
[    0.569527] fd883000.uart0: ttyS0 at MMIO 0xfd883000 (irq = 23, base_baud = 31250000) is a 16550A
[    0.581552] console [ttyS0] enabled
[    0.581709] fd884000.uart1: ttyS1 at MMIO 0xfd884000 (irq = 24, base_baud = 31250000) is a 16550A
[    0.581850] fd885000.uart2: ttyS2 at MMIO 0xfd885000 (irq = 25, base_baud = 31250000) is a 16550A
[    0.582286] resvmem-reboot-reason soc:reboot-reason: Allocated reserved memory, vaddr: 0x8D15000, paddr: 0x10020000
[    0.582386] ahci 0000:00:08.0: version 3.0
[    0.582402] ahci 0000:00:08.0: controller can't do PMP, turning off CAP_PMP
[    0.582568] ahci 0000:00:08.0: SSS flag set, parallel bus scan disabled
[    0.582585] ahci 0000:00:08.0: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    0.582590] ahci 0000:00:08.0: flags: 64bit ncq sntf stag pm led clo only fbs pio slum part ccc apst
[    0.582593] ahci 0000:00:08.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
[    0.583112] scsi host0: ahci
[    0.583296] scsi host1: ahci
[    0.583436] scsi host2: ahci
[    0.583577] scsi host3: ahci
[    0.583666] ata1: SATA max UDMA/133 abar m16384@0xfe208000 port 0xfe208100 irq 27
[    0.583668] ata2: SATA max UDMA/133 abar m16384@0xfe208000 port 0xfe208180 irq 28
[    0.583670] ata3: SATA max UDMA/133 abar m16384@0xfe208000 port 0xfe208200 irq 29
[    0.583672] ata4: SATA max UDMA/133 abar m16384@0xfe208000 port 0xfe208280 irq 30
[    0.583696] ahci 0001:00:00.0: writing to VF config space
[    0.589172] ahci: probe of 0001:00:00.0 failed with error -22
[    0.589561] m25p80 spi0.0: found mx25u6435f, expected spi_flash_jedec_detection
[    0.589565] m25p80 spi0.0: mx25u6435f (8192 Kbytes)
[    0.589664] 5 fixed-partitions partitions found on MTD device spi0.0
[    0.589666] Creating 5 MTD partitions on "spi0.0":
[    0.589669] 0x000000000000-0x0000001c0000 : "u-boot"
[    0.589907] 0x0000001c0000-0x0000001d0000 : "u-boot-env"
[    0.590107] 0x0000001d0000-0x0000001e0000 : "u-boot-env-2"
[    0.590299] 0x0000001e0000-0x0000001f0000 : "Factory"
[    0.590490] 0x0000001f0000-0x000000200000 : "EEPROM"
[    0.591096] libphy: Fixed MDIO Bus: probed
[    0.591098] tun: Universal TUN/TAP device driver, 1.6
[    0.591249] al_eth_drv: Initializing Peripheral Bus System (PBS) resources
[    0.591275] al_eth 0000:00:00.0: writing to VF config space
[    0.596925] al_eth 0000:00:00.0: AnnapurnaLabs unified 1GbE/10GbE/25GbE Ethernet Driver with SR-IOV al_eth v3.5.3 (Mar 14, 2019)
[    0.596931] al_eth 0000:00:00.0: driver_data is 0x0
[    0.596960] al_eth 0000:00:00.0: eth rev_id 3 (orig_rev_id 3) dev_id 2
[    0.597046] al_eth 0000:00:00.0: Board info: phy exist No. phy addr 0. mdio freq 2500 Khz. SFP connected Yes. media 5
[    0.597050] al_eth 0000:00:00.0: al_mod_eth_function_reset: performing FLR
[    0.602987] al_eth 0000:00:00.0 eth0: AnnapurnaLabs unified 1Gbe/10Gbe/25Gbe integrated found at mem fe000000, mac addr 68:d7:9a:66:90:5c
[    0.603005] al_eth 0000:00:01.0: writing to VF config space
[    0.608615] al_eth 0000:00:01.0: driver_data is 0x0
[    0.608639] al_eth 0000:00:01.0: eth rev_id 2 (orig_rev_id 2) dev_id 1
[    0.608721] al_eth 0000:00:01.0: Board info: phy exist Yes. phy addr 4. mdio freq 2500 Khz. SFP connected No. media 1
[    0.608724] al_eth 0000:00:01.0: al_mod_eth_function_reset: performing FLR
[    0.614443] al_eth 0000:00:01.0 eth1: AnnapurnaLabs unified 1Gbe/10Gbe/25Gbe integrated found at mem fe080000, mac addr 6a:d7:9a:66:90:5c
[    0.614466] libphy: alpine_mdio_shared: probed
[    0.687718] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.734476] ata1.00: ATA-9: WDC WD20PURX-64P6ZY0, 80.00A80, max UDMA/133
[    0.734479] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    0.734998] ata1.00: configured for UDMA/133
[    0.735171] scsi 0:0:0:0: Direct-Access     ATA      WDC WD20PURX-64P 0A80 PQ: 0 ANSI: 5
[    0.735378] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    0.735381] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.735392] sd 0:0:0:0: [sda] Write Protect is off
[    0.735395] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.735409] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.736587] ata2: SATA link down (SStatus 4 SControl 300)
[    0.737674] ata3: SATA link down (SStatus 4 SControl 300)
[    0.738755] ata4: SATA link down (SStatus 4 SControl 300)
[    0.813344] al_eth 0000:00:01.0 eth1: MDIO read failed on timeout
[    0.828389]  sda: sda1
[    0.828693] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.013344] al_eth 0000:00:01.0 eth1: MDIO read failed on timeout
[    1.213342] al_eth 0000:00:01.0 eth1: MDIO read failed on timeout
[    1.413342] al_eth 0000:00:01.0 eth1: MDIO read failed on timeout
[    1.613342] al_eth 0000:00:01.0 eth1: MDIO read failed on timeout
[    1.813342] al_eth 0000:00:01.0 eth1: MDIO read failed on timeout
[    2.013342] al_eth 0000:00:01.0 eth1: MDIO read failed on timeout
[    2.213342] al_eth 0000:00:01.0 eth1: MDIO read failed on timeout
[    2.286167] al_eth 0000:00:01.0 eth1: phy[4]: device alpine_mdio_shared_8:04, driver Atheros 8031 ethernet
[    2.286171] al_eth 0000:00:01.0 eth1: phy[4]:supported 62ef adv 62ef
[    2.286188] al_eth 0000:00:02.0: writing to VF config space
[    2.291829] al_eth 0000:00:02.0: driver_data is 0x0
[    2.291858] al_eth 0000:00:02.0: eth rev_id 3 (orig_rev_id 3) dev_id 2
[    2.291981] al_eth 0000:00:02.0: Board info: phy exist No. phy addr 0. mdio freq 2500 Khz. SFP connected Yes. media 5
[    2.291985] al_eth 0000:00:02.0: al_mod_eth_function_reset: performing FLR
[    2.297889] al_eth 0000:00:02.0 eth2: AnnapurnaLabs unified 1Gbe/10Gbe/25Gbe integrated found at mem fe0a0000, mac addr 22:e0:cc:86:5c:d2
[    2.297906] al_eth 0000:00:03.0: writing to VF config space
[    2.303516] al_eth 0000:00:03.0: driver_data is 0x0
[    2.303540] al_eth 0000:00:03.0: eth rev_id 2 (orig_rev_id 2) dev_id 1
[    2.303618] al_eth 0000:00:03.0: Board info: phy exist Yes. phy addr 17. mdio freq 2500 Khz. SFP connected No. media 1
[    2.303622] al_eth 0000:00:03.0: al_mod_eth_function_reset: performing FLR
[    2.309377] al_eth 0000:00:03.0 eth3: AnnapurnaLabs unified 1Gbe/10Gbe/25Gbe integrated found at mem fe120000, mac addr 46:f5:1a:de:20:fa
[    2.509343] al_eth 0000:00:01.0 eth1: MDIO read failed on timeout
[    2.509346] al_eth 0000:00:03.0 eth3: al_mod_eth_mdiobus_setup: cannot get phy device - auto probing failed.
[    2.927704] Setting 0 to s 0 m 0 rx 0 tx 0
[    3.108068] Setting 1 to s 2 m 1 rx 6 tx 1
[    3.643713] switch0: RTL8370B switch registered on alpine_mdio_shared_8
[    3.643732] al_eth 0000:00:03.0 eth3: phy[17]: device alpine_mdio_shared_8:11, driver Realtek RTL8370MB
[    3.643735] al_eth 0000:00:03.0 eth3: phy[17]:supported 62ef adv 62ef
[    3.643902] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.643905] ehci-pci: EHCI PCI platform driver
[    3.643923] ehci-platform: EHCI generic platform driver
[    3.643963] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.643970] ohci-pci: OHCI PCI platform driver
[    3.643984] uhci_hcd: USB Universal Host Controller Interface driver
[    3.644067] xhci_hcd 0001:01:00.0: xHCI Host Controller
[    3.644077] xhci_hcd 0001:01:00.0: new USB bus registered, assigned bus number 1
[    3.778173] xhci_hcd 0001:01:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x0000000010000410
[    3.778677] hub 1-0:1.0: USB hub found
[    3.778693] hub 1-0:1.0: 2 ports detected
[    3.778854] xhci_hcd 0001:01:00.0: xHCI Host Controller
[    3.778861] xhci_hcd 0001:01:00.0: new USB bus registered, assigned bus number 2
[    3.778865] xhci_hcd 0001:01:00.0: Host supports USB 3.0 SuperSpeed
[    3.778926] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.779102] hub 2-0:1.0: USB hub found
[    3.779117] hub 2-0:1.0: 2 ports detected
[    3.779286] usbcore: registered new interface driver cdc_acm
[    3.779287] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    3.779309] usbcore: registered new interface driver usb-storage
[    3.779335] usbcore: registered new interface driver cp210x
[    3.779343] usbserial: USB Serial support registered for cp210x
[    3.779416] i2c /dev entries driver
[    3.783489] rtc-s35390a 1-0030: rtc core: registered rtc-s35390a as rtc0
[    3.783507] i2c i2c-0: Added multiplexed i2c bus 1
[    3.783570] i2c i2c-0: Added multiplexed i2c bus 2
[    3.783630] i2c i2c-0: Added multiplexed i2c bus 3
[    3.783732] i2c i2c-0: Added multiplexed i2c bus 4
[    3.783735] pca954x 0-0071: registered 4 multiplexed busses for I2C switch pca9546
[    3.787410] adt7475 4-002e: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    3.787435] adt7475 4-002e: ADT7475 device, revision 1
[    3.787437] adt7475 4-002e: Optional features: fan4 pwm2
[    3.807766] al_thermal_probe: Thermal Sensor Loaded
[    3.807896] sp805-wdt fd88c000.wdt0: registration successful
[    3.807913] Bluetooth: HCI UART driver ver 2.3
[    3.807915] Bluetooth: HCI UART protocol H4 registered
[    3.807917] Bluetooth: HCI UART protocol BCSP registered
[    3.808286] usbcore: registered new interface driver usbhid
[    3.808288] usbhid: USB HID core driver
[    3.808358] usbcore: registered new interface driver snd-usb-audio
[    3.808619] IPVS: Registered protocols ()
[    3.808648] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[    3.808695] IPVS: ipvs loaded.
[    3.808748] gre: GRE over IPv4 demultiplexor driver
[    3.808749] ip_gre: GRE over IPv4 tunneling driver
[    3.809120] IPv4 over IPsec tunneling driver
[    3.809476] NET: Registered protocol family 10
[    3.809994] Segment Routing with IPv6
[    3.810078] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.810248] NET: Registered protocol family 17
[    3.810265] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    3.810298] Bluetooth: RFCOMM socket layer initialized
[    3.810306] Bluetooth: RFCOMM ver 1.11
[    3.810310] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.810314] Bluetooth: BNEP socket layer initialized
[    3.810316] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.810318] Bluetooth: HIDP socket layer initialized
[    3.810320] 8021q: 802.1Q VLAN Support v1.8
[    3.810516] registered taskstats version 1
[    3.810518] Loading compiled-in X.509 certificates
[    3.810622] pstore: Using compression: deflate
[    3.811129] Key type encrypted registered
[    3.811451] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[    3.811920] random: fast init done
[    3.812628] rtc-s35390a 1-0030: setting system clock to 2021-10-14 20:03:51 UTC (1634241831)
[    3.812682] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.875208] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.875216] ALSA device list:
[    3.875217]   No soundcards found.
[    3.875320] Waiting for root device /dev/sdb2...
[    3.875349] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.875351] cfg80211: failed to load regulatory.db
[    4.181344] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[    4.513556] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[    4.549951] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    4.584274] usb-storage 2-1:1.0: USB Mass Storage device detected
[    4.584468] scsi host4: usb-storage 2-1:1.0
[    5.598741] scsi 4:0:0:0: Direct-Access     Generic  MassStorageClass 1537 PQ: 0 ANSI: 6
[    5.756771] sd 4:0:0:0: [sdb] 30777344 512-byte logical blocks: (15.8 GB/14.7 GiB)
[    5.757469] sd 4:0:0:0: [sdb] Write Protect is off
[    5.757473] sd 4:0:0:0: [sdb] Mode Sense: 21 00 00 00
[    5.758220] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    5.767776]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6
[    5.770215] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    5.773165] VFS: Mounted root (squashfs filesystem) readonly on device 8:18.
[    5.774790] devtmpfs: mounted
[    5.774936] Freeing unused kernel memory: 576K
[    5.785418] Run /sbin/init as init process
[    6.471675] random: crng init done
[    6.508196] EXT4-fs (sdb6): recovery complete
[    6.508202] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[    9.265583] ubnt_common: loading out-of-tree module taints kernel.
[    9.265589] ubnt_common: module license 'Proprietary' taints kernel.
[    9.265591] Disabling lock debugging due to kernel taint
[    9.268235] [UBNT_STA_HT] Initialize hash table
[    9.268255] [UBNT_STA_HT] done
[    9.268257] creating /proc/ubnt_peek/
[    9.268263] creating /proc/ubnt_peek/peek_disable
[    9.268265] creating /proc/ubnt_peek/loop_check
[    9.268267] creating /proc/ubnt_peek/loop_debug
[    9.268269] creating /proc/ubnt_peek/loop_uif
[    9.268271] creating /proc/ubnt_peek/tcp_debug_mac
[    9.268273] creating /proc/ubnt_peek/tcp_debug_connections
[    9.268280] qos: registered
[    9.268281] creating /proc/ubnt_frame_id/
[    9.268284] creating /proc/ubnt_frame_id/netdevs
[    9.318350] ubnthal: Ubiquiti UniFi Dream Machine PRO
[    9.319296] creating procfs for ubnthal
[    9.319303] creating proc entry for system.info
[    9.319305] creating proc entry for board
[    9.329248] Unable to find matching dts node.
[    9.329254] creating procfs for status
[    9.329259] creating proc entry for IsDefault
[    9.329262] creating proc entry for IsLocated
[    9.329264] creating proc entry for IsIsolated
[    9.329266] creating proc entry for IsLte
[    9.329268] creating proc entry for ControllerPort
[    9.329269] creating proc entry for ControllerHost
[    9.489091] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: errors=panic
[    9.492071] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: errors=panic
[    9.507620] creating /proc/gpio/
[    9.507627]          /proc/gpio/ledbar_control
[    9.507629]          /proc/gpio/led_pattern
[    9.507631]          /proc/gpio/led_tempo
[    9.507633]          /proc/gpio/poe_passthrough
[    9.788107] watchdog: watchdog0: nowayout prevents watchdog being stopped!
[    9.788110] watchdog: watchdog0: watchdog did not stop!
[    9.814630] zram: Added device: zram0
[    9.831930] zram0: detected capacity change from 0 to 7244554240
[    9.844833] Adding 7074756k swap on /dev/zram0.  Priority:100 extents:1 across:7074756k SS
[    9.969801] ICMPv6: process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.base_reachable_time - use net.ipv6.neigh.default.base_reachable_t                                                                        ime_ms instead
[   10.024889] al_eth 0000:00:00.0 eth9.tmp: renamed from eth0
[   10.040344] al_eth 0000:00:02.0 eth10.tmp: renamed from eth2
[   10.052355] al_eth 0000:00:03.0 switch0.tmp: renamed from eth3
[   10.072330] al_eth 0000:00:01.0 eth8.tmp: renamed from eth1
[   10.094922] al_eth 0000:00:02.0 eth10: renamed from eth10.tmp
[   10.111843] IPv6: ADDRCONF(NETDEV_UP): eth10: link is not ready
[   10.116719] al_eth 0000:00:01.0 eth8: renamed from eth8.tmp
[   10.138742] al_eth 0000:00:01.0: al_mod_eth_function_reset: performing FLR
[   10.144103] Configured MAC to RGMII mode
[   10.145041] al_eth 0000:00:01.0 eth8: using MSI-X per Queue interrupt mode
[   10.148386] IPv6: ADDRCONF(NETDEV_UP): eth8: link is not ready
[   10.153775] al_eth 0000:00:00.0 eth9: renamed from eth9.tmp
[   10.175894] IPv6: ADDRCONF(NETDEV_UP): eth9: link is not ready
[   10.180784] al_eth 0000:00:03.0 switch0: renamed from switch0.tmp
[   10.202739] al_eth 0000:00:03.0: al_mod_eth_function_reset: performing FLR
[   10.208150] Configured MAC to RGMII mode
[   10.209074] al_eth 0000:00:03.0 switch0: using MSI-X per Queue interrupt mode
[   10.212419] IPv6: ADDRCONF(NETDEV_UP): switch0: link is not ready
[   10.235316] br0: port 1(switch0) entered blocking state
[   10.235320] br0: port 1(switch0) entered disabled state
[   10.235410] device switch0 entered promiscuous mode
[   10.237611] br0: port 2(eth10) entered blocking state
[   10.237614] br0: port 2(eth10) entered disabled state
[   10.237686] device eth10 entered promiscuous mode
[   10.240333] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[   10.400690] IPv6: ADDRCONF(NETDEV_UP): eth9: link is not ready
[   10.420867] br0: port 2(eth10) entered disabled state
[   10.424461] IPv6: ADDRCONF(NETDEV_UP): eth10: link is not ready
[   10.455292] br0: port 1(switch0) entered disabled state
[   10.458172] al_eth 0000:00:03.0: al_mod_eth_function_reset: performing FLR
[   10.463581] Configured MAC to RGMII mode
[   10.464538] al_eth 0000:00:03.0 switch0: using MSI-X per Queue interrupt mode
[   10.467873] IPv6: ADDRCONF(NETDEV_UP): switch0: link is not ready
[   10.493866] al_eth 0000:00:01.0: al_mod_eth_function_reset: performing FLR
[   10.499261] Configured MAC to RGMII mode
[   10.500205] al_eth 0000:00:01.0 eth8: using MSI-X per Queue interrupt mode
[   10.503535] IPv6: ADDRCONF(NETDEV_UP): eth8: link is not ready
[   11.133370] IPv6: ADDRCONF(NETDEV_CHANGE): eth8: link becomes ready
[   11.133521] IPv6: ADDRCONF(NETDEV_CHANGE): switch0: link becomes ready
[   11.133547] br0: port 1(switch0) entered blocking state
[   11.133550] br0: port 1(switch0) entered forwarding state
[   11.133596] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[   11.485347] eth [al_mod_eth_3]: set link speed to 1000Mbps. full duplex.
[   11.485355] al_eth 0000:00:03.0 switch0: Link is Up - 1Gbps/Full - flow control off
[   12.542031] eth [al_mod_eth_1]: set link speed to 1000Mbps. full duplex.
[   12.542037] al_eth 0000:00:01.0 eth8: Link is Up - 1Gbps/Full - flow control rx/tx
[   15.837683] Bluetooth: hci0: unexpected event for opcode 0x0000
[   17.918073] PPP generic driver version 2.4.2
[   19.940049] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   23.840933] al_mod_eth_group_lm_link_conf_apply: Trying to apply configuration for unregistered link! link:0, serdes_grp:2
[   23.840935] al_mod_eth_group_lm_link_conf_apply: Trying to apply configuration for unregistered link! link:1, serdes_grp:2
[   23.840938] al_mod_eth_group_lm_link_conf_apply: Trying to apply configuration for unregistered link! link:3, serdes_grp:2
[   28.344892] al_mod_eth_group_lm_link_conf_apply: Trying to apply configuration for unregistered link! link:0, serdes_grp:3
[   28.344896] al_mod_eth_group_lm_link_conf_apply: Trying to apply configuration for unregistered link! link:1, serdes_grp:3
[   28.344898] al_mod_eth_group_lm_link_conf_apply: Trying to apply configuration for unregistered link! link:3, serdes_grp:3
[   28.925865] al_eth 0000:00:01.0 eth8: Link is Down
[   30.790285] IPv6: ADDRCONF(NETDEV_UP): eth10.10: link is not ready
[   30.792782] br0: port 1(switch0) entered disabled state
[   30.973991] eth [al_mod_eth_1]: set link speed to 1000Mbps. full duplex.
[   30.973999] al_eth 0000:00:01.0 eth8: Link is Up - 1Gbps/Full - flow control rx/tx
[   31.181499] br0: port 1(switch0.1) entered blocking state
[   31.181503] br0: port 1(switch0.1) entered disabled state
[   31.181582] device switch0.1 entered promiscuous mode
[   31.181620] br0: port 1(switch0.1) entered blocking state
[   31.181623] br0: port 1(switch0.1) entered forwarding state
[   31.253363] br10: port 1(eth10.10) entered blocking state
[   31.253366] br10: port 1(eth10.10) entered disabled state
[   31.253447] device eth10.10 entered promiscuous mode
[   31.255307] br10: port 2(switch0.10) entered blocking state
[   31.255310] br10: port 2(switch0.10) entered disabled state
[   31.255376] device switch0.10 entered promiscuous mode
[   31.255405] br10: port 2(switch0.10) entered blocking state
[   31.255407] br10: port 2(switch0.10) entered forwarding state
[   31.343471] ICMPv6: process `ubios-udapi-ser' is using deprecated sysctl (syscall) net.ipv6.neigh.br0.base_reachable_time - use net.ipv6.neigh.br0.base_reachable_                                                                        time_ms instead
[   31.422931] Init chrdev /dev/detector with major 190
[   31.422938] tdts: tcp_conn_max = 32000
\x000a
[   31.422940] tdts: tcp_conn_timeout = 300 sec
\x000a
[   34.485124] systemd-journald[29]: Received request to flush runtime journal from PID 1