| !IMPORTANT! | This is a development branch, that is not relelased by CompuLab yet |
|---|
It is up to developers to prepare the host machine; it requires:
- Setup Cross Compiler
- Install these packages:
shareutils, swing
- WorkDir:
mkdir -p compulab-bootloader/build && cd compulab-bootloader
export BUILD=$(pwd)/build
- Set a CompuLab machine:
| Machine | Command Line |
|---|---|
| ucm-imx8m-plus | export MACHINE=ucm-imx8m-plus |
| som-imx8m-plus | export MACHINE=som-imx8m-plus |
| iot-gate-imx8plus | export MACHINE=iot-gate-imx8plus |
- Clone the source code:
git clone https://github.com/compulab-yokneam/u-boot-compulab.git
cd u-boot-compulab
- Config
make O=${BUILD} ${MACHINE}_defconfig
make O=${BUILD} menuconfig
- Build
make O=${BUILD} -C board/compulab/plat/imx8mp/firmware all
nice make -j`nproc` O=${BUILD} flash.bin
- Result
ls -al ${BUILD}/flash.bin