This is FYSETC's project database for VORON 2.4 kit, which is convenient for you to find information. Thanks for VORON Team's great work, they always design fantastic printers.
Official website:：https://vorondesign.com/voron2.4 Official Github：https://github.com/VoronDesign/Voron-2/tree/V2.4r2
In folder Voron-2-Voron2.4 beside this README file, we make some small changes base on the VORON official material. Like change the board to Spider and others.
Please check BOM here.
Besides the parts in Voron sourcing guide, we offer extra useful parts for you.
This is for fans wire connection, with this connector you can wire two or more fans to one side of the connector, and the other side to Spider board. Then you can control the two or more fans with one control pin in Spider.
You can find all printed parts in VORON website, VORON github.
Printed parts are not included in our VORON 2.4 kit. As VORON official provide you options on some particular printed part of the machine. Like the plug panel at the back of VORON machine, you can choose plug_panel or plug_panel_filtered_mains. So in our kit, we also need to choose too, below is our choice.
| Revision 1.0 | Revision 1.1 | Revision 1.2 | Revision 1.3 | R2 |
|---|---|---|---|---|
| plug panel, Microswitch edge pod, Z Chain mount part 1, Z Chain mount part 2, Spider board mount | plug panel, Microswitch edge pod, Z Chain mount part 1, Z Chain mount part 2, Spider board mount | plug panel, Microswitch edge pod, Z Chain mount part, Spider board mount | plug panel, Microswitch edge pod, Z Chain mount part, Spider board mount | Microswitch_Z_Endstop_new_shorter |
There is wiring from VORON community here. Also you can refer Spider wiring here.
Note: Check your fan voltage before you set the fan jumpers, the jumpers for fan in below diagram are all set to 24v.
If the pic is not clear enough, please check PDF file here.
If the pic is not clear enough, please check PDF file here.
If the pic is not clear enough, please check PDF type here.
If the pic is not clear enough, please check PDF file here.
If the pic is not clear enough, please check PDF type here.
You can find example Klipper printer.cfg file on VORON github here or our Spider github here or gitee here. And you can get our pre-build firmware and OS image in the firmware&OS folder next to this README file.
