HTML+RDFa 1.1

Abstract

This specification defines rules and guidelines for adapting the RDFa Core 1.1 specification for use in HTML5 and XHTML5. The rules defined in this specification not only apply to HTML5 documents in non-XML and XML mode, but also to HTML4 and XHTML documents interpreted through the HTML5 parsing rules.

3. Extensions to RDFa Core 1.1

The RDFa Core 1.1 [RDFA-CORE] specification is the base document on which this specification builds. RDFa Core 1.1 specifies the attributes and syntax, in Section 5: Attributes and Syntax, and processing model, in Section 7: Processing Model, for extracting RDF from a Web document. This section specifies changes to the attributes and processing model defined in RDFa Core 1.1 in order to support extracting RDF from HTML documents.

The requirements and rules, as specified in RDFa Core and further extended in this document, apply to all HTML5 documents. The RDFa Processor operating on HTML and XHTML documents, specifically the resulting DOMs or Infosets, must apply the same processing rules for HTML4, HTML5 and XHTML5 serializations, DOMs and/or Infosets.

3.1 Additional RDFa Processing Rules

Documents conforming to the rules in this specification are processed according to [RDFA-CORE] with the following extensions:

The default vocabulary URI is http://www.w3.org/1999/xhtml/vocab#.
The default RDFa profile document is http://www.w3.org/1999/xhtml/vocab.
The base can be set using the base element.
The current language can be set using either the @lang or @xml:lang attributes.
In Section 7.5: Sequence, processing step 6, if no URI is provided by a resource attribute, then first check to see if the element is the head or body element. If it is, then act as if there is an empty @about present, and process it according to the rule for @about.
In Section 7.5: Sequence, processing step 7, if no URI is provided, then first check to see if the element is the head or body element. If it is, then act as if there is an empty @about present, and process it according to the rule for @about.

3.2 Modifying the Input Document

RDFa's tree-based processing rules, outlined in Section 7.5: Sequence of the RDFa Core 1.1 specification [RDFA-CORE], allow an input document to be automatically corrected, cleaned-up, re-arranged, or modified in any way that is approved by the host language prior to processing. Element nesting issues in HTML documents should be corrected before the input document is translated into the DOM, a valid tree-based model, on which the RDFa processing rules will operate.

Any mechanism that generates a data structure equivalent to the HTML5 or XHTML5 DOM, such as the html5lib library, may be used as the mechanism to construct the tree-based model provided as input to the RDFa processing rules.

3.3 Specifying the language for a literal

RDFa Core 1.1 allows for the current language to be specified by the Host Language. In order for RDFa Processors to conform to this specification, they must use the mechanism described in The lang and xml:lang attributes section of the [HTML5] specification to determine the language of a node.

If an author is editing an HTML fragment and is unsure of the final encapsulating MIME type for their markup, it is suggested that the author specify both lang and xml:lang where the value in both attributes is exactly the same.

3.4 Invalid XMLLiteral values

When generating literals of type XMLLiteral, the processor must ensure that the output XMLLiteral is a namespace well-formed XML fragment. A namespace well-formed XML fragment has the following properties:

The XML fragment, when placed inside of a single root element, must validate as well-formed XML. The normative language that describes a well-formed XML document is specified in Section 2.1 "Well-Formed XML Documents" of the XML specification.
The XML fragment, when placed inside of a single root element, must retain all active namespace information. The currently active attributes declared using xmlns and xmlns: stored in the RDFa Processor's current evaluation context in the list of URI mappings must be preserved in the generated XMLLiteral. The PREFIX value for xmlns:PREFIX must be transformed to all lower-case characters when preserving the value in the XMLLiteral. All active namespaces declared via xmlns and xmlns: must be placed in each top-level element in the generated XMLLiteral, taking care to not overwrite pre-existing namespace values.

An RDFa Processor that transforms the XML fragment must use the Coercing an HTML DOM into an Infoset algorithm, as specified in the HTML5 specification, followed by the algorithm defined in the Serializing XHTML Fragments section of the HTML5 specification. If an error or exception occurs at any point during the transformation, the triple containing the XMLLiteral must not be generated.

Transformation to a namespace well-formed XML fragment is required because an application that consumes XMLLiteral data expects that data to be a namespace well-formed XML fragment.

The transformation requirement does not apply to input data that are text-only, such as literals that contain a datatype attribute with an empty value (""), or input data that that contain only text nodes.

An example transformation demonstrating the preservation of namespace values is provided below. The → symbol is used to denote that the line is a continuation of the previous line and is included purely for the purposes of readability:

<p xmlns:ex="http://example.org/vocab#" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
 Two rectangles (the example markup for them are stored in a triple):
 <svg xmlns="http://www.w3.org/2000/svg" property="ex:markup" datatype="rdf:XMLLiteral">
 →<rect width="300" height="100" style="fill:rgb(0,0,255);stroke-width:1; stroke:rgb(0,0,0)">
 →<rect width="50" height="50" style="fill:rgb(255,0,0);stroke-width:2;stroke:rgb(0,0,0)"></rect></rect></svg>
</p>

The markup above should produce the following triple, which preserves the xmlns declaration in the markup by injecting the xmlns attribute in the rect elements:

<>
   <http://example.org/vocab#markup>
      "<rect xmlns=\"http://www.w3.org/2000/svg\" width=\"300\" 
→height=\"100\" style=\"fill:rgb(0,0,255);stroke-width:1; stroke:rgb(0,0,0)\"/>
→<rect xmlns=\"http://www.w3.org/2000/svg\" width=\"50\" 
→height=\"50\" style=\"fill:rgb(255,0,0);stroke-width:2; 
→stroke:rgb(0,0,0)\"/>"^^http://www.w3.org/1999/02/22-rdf-syntax-ns#XMLLiteral .

Since the ex and rdf namespaces are not used in either rect element, they are not preserved in the XMLLiteral.

Similarly, compound document elements that reside in different namespaces must have their namespaces declarations preserved:

<p xmlns:ex="http://example.org/vocab#"
   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
   <span class="hilite">xmlns:fb="http://www.facebook.com/2008/fbml"</span>
 This is how you markup a user in FBML:
 <span property="ex:markup" datatype="rdf:XMLLiteral">
→<p><fb:user uid="12345">The User</fb:user></p>
→</span>
</p>

The markup above should produce the following triple, which preserves the fb namespace in the corresponding triple:

<>
   <http://example.org/vocab#markup>
      "<p xmlns:fb="http://www.facebook.com/2008/fbml">
→<fb:user uid="12345">
→</p>"^^http://www.w3.org/1999/02/22-rdf-syntax-ns#XMLLiteral .

3.5 `xmlns:`-Prefixed Attributes

While this section outlines xmlns: processing in RDFa, the support for distributed extensibility in non-XML mode HTML5 (using xmlns and xmlns:) is still an open issue. This section may be further modified before Last Call based on progress made on the distributed extensibility issue.

CURIE prefix mappings specified using attributes prepended with xmlns: must be processed using the algorithm defined in section 4.4.1: Extracting URI Mappings from Infosets for Infoset-based processors, or section 4.5.1: Extracting URI Mappings from DOMs for DOM Level 2-based processors. For CURIE prefix mappings using the prefix attribute, Section 7.5: Sequence, step #4 must be used to process namespace values.

Since CURIE prefix mappings have been specified using xmlns:, and since HTML attribute names are case-insensitive, CURIE prefix names declared using the xmlns:attribute-name pattern xmlns:<PREFIX>="<URI>" should be specified using only lower-case characters. For example, the text "xmlns:" and the text in "<PREFIX>" should be lower-case only. This is to ensure that prefix mappings are interpreted in the same way between HTML (case-insensitive attribute names) and XHTML (case-sensitive attribute names) document types.

4. Extensions to the HTML5 Syntax

Status: ISSUE-41 (decentralized extensibility) blocks progress to Last Call

There are a few extensions to the HTML5 specification that are required in order to fully support RDFa. The following sub-sections outline the necessary extensions to the base HTML5 specification.

4.1 The RDFa Attributes and Valid Values

All RDFa attributes and valid values (including CURIEs), as listed in Section 2.1: The RDFa Attributes, are conforming when used in an HTML5 or XHTML5 document.

4.2 Conformance Criteria for `xmlns:`-Prefixed Attributes

While this section outlines xmlns: conformance criteria for HTML+RDFa, the support for distributed extensibility in non-XML mode HTML5 (using xmlns and xmlns:) is still an open issue. This section may be further modified before Last Call based on progress made on the distributed extensibility issue.

Since RDFa uses attributes starting with xmlns: to specify CURIE prefixes, any attribute starting with a case-insensitive match on the text string "xmlns:" must be preserved in the DOM or other tree-like model that is passed to the RDFa Processor. For documents conforming to this specification, attributes with names that have a case insensitive prefix matching "xmlns:" must be considered conforming. Conformance checkers must accept attribute names that have a case insensitive prefix matching "xmlns:" as conforming.

All attributes starting with a case insensitive prefix matching "xmlns:" must conform to the production rules outlined in Namespaces in XML [XML-NAMES11], Section 3: Declaring Namespaces. Documents that contain xmlns: attributes that do not conform to Namespaces in XML must not be accepted as conforming.

4.3 Preserving Namespaces via Coercion to Infoset

This section needs feedback from the user agent vendors to ensure that this feature does not conflict with user agent architecture and has no technical reason that it cannot be implemented.

RDFa is uses the xmlns: pattern to declare prefix mappings, it is important that namespace information that is declared in non-XML mode HTML5 documents are mapped to an Infoset correctly. In order to ensure this mapping is performed correctly, the "Coercing an HTML DOM into an infoset" rules defined in [HTML5] must be extended to include the following rule:

If the XML API is namespace-aware, the tool must ensure that ([namespace name], [local name], [normalized value]) namespace tuples are created when converting the non-XML mode DOM into an Infoset. Given a standard xmlns: definition, xmlns:foo="http://example.org/bar#", the [namespace name] is http://www.w3.org/2000/xmlns/, the [local name] is foo, and the [normalized value] is http://example.org/bar#, thus the namespace tuple would be (http://www.w3.org/2000/xmlns/, foo, http://example.org/bar#).

For example, given the following input text:

<div xmlns:audio="http://purl.org/media/audio#">

The div element above, when coerced from an HTML DOM into an Infoset, should contain an attribute in the [namespace attributes] list with a [namespace name] set to "http://www.w3.org/2000/xmlns/", a [local name] set to audio, and a [normalized value] of "http://purl.org/media/audio#".

4.4 Infoset-based Processors

While the intent of the RDFa processing instructions were to provide a set of rules that are as language and toolchain agnostic as possible, for the sake of clarity, detailed methods of extracting RDFa content from processors operating on an XML Information Set are provided below.

4.4.1 Extracting URI Mappings from Infosets

Extracting URI Mappings declared via xmlns: while operating from within an Infoset-based RDFa processor can be achieved using the following algorithm:

While processing an element as described in [RDFA-CORE], Section 7.5: Sequence, Step #2:

For each attribute in the [namespace attributes] list that has a [prefix] value, create a [URI mapping] by storing the [prefix] as the value to be mapped, and the [normalized value] as the value to map.
For each attribute in the [attributes] list that has no value for [prefix] and a [local name] that starts with xmlns:, create a [URI mapping] by storing the [local name] part with the xmlns: characters removed as the value to be mapped, and the [normalized value] as the value to map.
This step is unnecessary if the Infoset coercion rules preserve namespaces specified in non-XML mode.

For example, assume that the following markup is processed by an Infoset-based RDFa processor:

<div xmlns:audio="http://purl.org/media/audio#" ...

After the markup is processed, there should exist a [URI mapping] in the [local list of URI mappings] that contains a mapping from audio to http://purl.org/media/audio#.

4.4.2 Processing RDFa Attributes

There are a number of non-prefixed attributes that are associated with RDFa Processing in HTML5. If an XML Information Set based RDFa processor is used to process these attributes, the following algorithm should be used to detect and extract the values of the attributes.

While processing Infoset Attribute Information Items in Element Information Items as described in [RDFA-CORE], Section 7.5: Sequence, Step #4 through Step #9:

For each Attribute Information Item specific to RDFa in the Infoset [attributes] list that has a [prefix] with no value, extract and use the [normalized value].

4.5 DOM Level 2-based Processors

This mechanism should be double-checked against all of the RDFa Javascript implementations to ensure correctness.

4.5.1 Extracting URI Mappings from DOMs

Extracting URI Mappings declared via xmlns: while operating from within a DOM Level 2 based RDFa processor can be achieved using the following algorithm:

While processing each DOM2 [Element] as described in [RDFA-CORE], Section 7.5: Sequence, Step #2:

For each [Attr] in the [Node.attributes] list that has a [namespace prefix] value of xmlns, create a [URI mapping] by storing the [local name] as the value to be mapped, and the [Node.nodeValue] as the value to map.
For each [Attr] in the [Node.attributes] list that has a [namespace prefix] value of null and a [local name] that starts with xmlns:, create a [URI mapping] by storing the [local name] part with the xmlns: characters removed as the value to be mapped, and the [Node.nodeValue] as the value to map.
This step is unnecessary if the XML and non-XML mode DOMs are namespace consistent.

For example, assume that the following markup is processed by a DOM2-based RDFa processor:

<div xmlns:audio="http://purl.org/media/audio#" ...

After the markup is processed, there should exist a [URI mapping] in the [local list of URI mappings] that contains a mapping from audio to http://purl.org/media/audio#.

4.5.2 Processing RDFa Attributes

There are a number of non-prefixed attributes that are associated with RDFa processing in HTML5. If an DOM2-based RDFa processor is used to process these attributes, the following algorithm should be used to detect and extract the values of the attributes.

While processing an element as described in [RDFA-CORE], Section 5.5: Sequence, Step #4 through Step #9:

For each RDFa attribute in the [Node.attributes] list that has a [namespace prefix] that is null, extract and use [Node.nodeValue] as the value.

A. Validation

Documents written using the markup language defined in this specification may be validated using the DTD defined in this section. If a document author wants to facilitate such validation, they may include the following declaration at the top of their document:

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01+RDFa 1.1//EN"
   "http://www.w3.org/MarkUp/DTD/html401-rdfa11-1.dtd">

A.1 The HTML 4.01 + RDFa 1.1 DTD

You can download this version of this file from DTD/html401-rdfa11-1.dtd. The latest version is available at http://www.w3.org/MarkUp/DTD/html401-rdfa11-1.dtd.

<!--
    This is the HTML 4.01 + RDFa 1.1 DTD, which includes
    presentation attributes and elements that W3C expects to phase out
    as support for style sheets matures. Authors should use the Strict
    DTD when possible, but may use the Transitional DTD when support
    for presentation attribute and elements is required.

    HTML 4 includes mechanisms for style sheets, scripting,
    embedding objects, improved support for right to left and mixed
    direction text, and enhancements to forms for improved
    accessibility for people with disabilities.

          Draft: $Date: 2019/03/20 17:11:46 $

          Editors:
              Shane McCarron <[email protected]>
              Manu Sporny <[email protected]>

          Original Authors:
              Dave Raggett <[email protected]>
              Arnaud Le Hors <[email protected]>
              Ian Jacobs <[email protected]>

    Further information about RDFa in HTML is available at:
        http://www.w3.org/TR/rdfa-in-html

    Further information about HTML 4.01 is available at:

        http://www.w3.org/TR/1999/REC-html401-19991224

    And further information about RDFa is available at:

        http://www.w3.org/TR/rdfa-core

    The HTML 4.01 specification includes additional
    syntactic constraints that cannot be expressed within
    the DTDs.

-->
<!ENTITY % HTML.Version "-//W3C//DTD HTML 4.01+RDFa 1.1//EN"
  -- Typical usage:

    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01+RDFa 1.1//EN"
            "http://www.w3.org/MarkUp/DTD/html401-rdfa11-1.dtd">
    <html>
    <head>
    ...
    </head>
    <body>
    ...
    </body>
    </html>

    The URI used as a system identifier with the public identifier allows
    the user agent to download the DTD and entity sets as needed.

-->

<!--================== Imported Names ====================================-->
<!-- Feature Switch for frameset documents -->
<!ENTITY % HTML.Frameset "IGNORE">

<!ENTITY % ContentType "CDATA"
    -- media type, as per [RFC2045]
    -->

<!ENTITY % ContentTypes "CDATA"
    -- comma-separated list of media types, as per [RFC2045]
    -->

<!ENTITY % Charset "CDATA"
    -- a character encoding, as per [RFC2045]
    -->

<!ENTITY % Charsets "CDATA"
    -- a space-separated list of character encodings, as per [RFC2045]
    -->

<!ENTITY % LanguageCode "NAME"
    -- a language code, as per [RFC1766]
    -->

<!ENTITY % Character "CDATA"
    -- a single character from [ISO10646] 
    -->

<!ENTITY % LinkTypes "CDATA"
    -- space-separated list of link types
    -->

<!ENTITY % MediaDesc "CDATA"
    -- single or comma-separated list of media descriptors
    -->

<!ENTITY % URI "CDATA"
    -- a Uniform Resource Identifier,
       see [URI]
    -->

<!ENTITY % Datetime "CDATA" -- date and time information. ISO date format -->


<!ENTITY % Script "CDATA" -- script expression -->

<!ENTITY % StyleSheet "CDATA" -- style sheet data -->

<!ENTITY % FrameTarget "CDATA" -- render in this frame -->


<!ENTITY % Text "CDATA">


<!-- Parameter Entities -->

<!ENTITY % head.misc "SCRIPT|STYLE|META|LINK|OBJECT" -- repeatable head elements -->

<!ENTITY % heading "H1|H2|H3|H4|H5|H6">

<!ENTITY % list "UL | OL |  DIR | MENU">

<!ENTITY % preformatted "PRE">

<!ENTITY % Color "CDATA" -- a color using sRGB: #RRGGBB as Hex values -->

<!-- There are also 16 widely known color names with their sRGB values:

    Black  = #000000    Green  = #008000
    Silver = #C0C0C0    Lime   = #00FF00
    Gray   = #808080    Olive  = #808000
    White  = #FFFFFF    Yellow = #FFFF00
    Maroon = #800000    Navy   = #000080
    Red    = #FF0000    Blue   = #0000FF
    Purple = #800080    Teal   = #008080
    Fuchsia= #FF00FF    Aqua   = #00FFFF
 -->

<!ENTITY % bodycolors "
  bgcolor     %Color;        #IMPLIED  -- document background color --
  text        %Color;        #IMPLIED  -- document text color --
  link        %Color;        #IMPLIED  -- color of links --
  vlink       %Color;        #IMPLIED  -- color of visited links --
  alink       %Color;        #IMPLIED  -- color of selected links --
  ">

<!--================ Character mnemonic entities =========================-->

<!ENTITY % HTMLlat1 PUBLIC
   "-//W3C//ENTITIES Latin1//EN//HTML"
   "http://www.w3.org/TR/html401/HTMLlat1.ent">
%HTMLlat1;

<!ENTITY % HTMLsymbol PUBLIC
   "-//W3C//ENTITIES Symbols//EN//HTML"
   "http://www.w3.org/TR/html401/HTMLsymbol.ent">
%HTMLsymbol;

<!ENTITY % HTMLspecial PUBLIC
   "-//W3C//ENTITIES Special//EN//HTML"
   "http://www.w3.org/TR/html401/HTMLspecial.ent">
%HTMLspecial;
<!--=================== Generic Attributes ===============================-->

<!ENTITY % coreattrs
 "id          ID             #IMPLIED  -- document-wide unique id --
  class       CDATA          #IMPLIED  -- space-separated list of classes --
  style       %StyleSheet;   #IMPLIED  -- associated style info --
  title       %Text;         #IMPLIED  -- advisory title --"
  >

<!ENTITY % i18n
 "lang        %LanguageCode; #IMPLIED  -- language code --
  dir         (ltr|rtl)      #IMPLIED  -- direction for weak/neutral text --"
  >

<!ENTITY % events
 "onclick     %Script;       #IMPLIED  -- a pointer button was clicked --
  ondblclick  %Script;       #IMPLIED  -- a pointer button was double clicked--
  onmousedown %Script;       #IMPLIED  -- a pointer button was pressed down --
  onmouseup   %Script;       #IMPLIED  -- a pointer button was released --
  onmouseover %Script;       #IMPLIED  -- a pointer was moved onto --
  onmousemove %Script;       #IMPLIED  -- a pointer was moved within --
  onmouseout  %Script;       #IMPLIED  -- a pointer was moved away --
  onkeypress  %Script;       #IMPLIED  -- a key was pressed and released --
  onkeydown   %Script;       #IMPLIED  -- a key was pressed down --
  onkeyup     %Script;       #IMPLIED  -- a key was released --"
  >

<!ENTITY % CURIE "CDATA" >
<!ENTITY % CURIEs "CDATA" >
<!ENTITY % CURIEorURI "CDATA" >
<!ENTITY % CURIEorURIs "CDATA" >
<!ENTITY % SafeCURIEorCURIEorURI "CDATA" >
<!ENTITY % SafeCURIEorCURIEorURIs "CDATA" >
<!ENTITY % TERMorCURIEorAbsURI "CDATA" >
<!ENTITY % TERMorCURIEorAbsURIs "CDATA" >
<!ENTITY % URIs "CDATA" >

<!ENTITY % metainformation
 "about       %SafeCURIEorCURIEorURI;   #IMPLIED
  content     CDATA                     #IMPLIED
  datatype    %TERMorCURIEorAbsURI;     #IMPLIED
  typeof      %TERMorCURIEorAbsURIs;    #IMPLIED
  prefix      CDATA                     #IMPLIED
  profile     %URIs;                    #IMPLIED
  property    %TERMorCURIEorAbsURIs;    #IMPLIED
  href        %URI;                     #IMPLIED
  rel         %TERMorCURIEorAbsURIs;    #IMPLIED
  rev         %TERMorCURIEorAbsURIs;    #IMPLIED
  resource    %SafeCURIEorCURIEorURI;   #IMPLIED
  vocab       %URI;                     #IMPLIED"
  >

<!-- Reserved Feature Switch -->
<!ENTITY % HTML.Reserved "IGNORE">

<!-- The following attributes are reserved for possible future use -->
<![ %HTML.Reserved; [
<!ENTITY % reserved
 "datasrc     %URI;          #IMPLIED  -- a single or tabular Data Source --
  datafld     CDATA          #IMPLIED  -- the property or column name --
  dataformatas (plaintext|html) plaintext -- text or html --"
  >
]]>

<!ENTITY % reserved "">

<!ENTITY % attrs "%coreattrs; %i18n; %events; %metainformation;">

<!ENTITY % align "align (left|center|right|justify)  #IMPLIED"
                   -- default is left for ltr paragraphs, right for rtl --
  >

<!--=================== Text Markup ======================================-->

<!ENTITY % fontstyle
 "TT | I | B | U | S | STRIKE | BIG | SMALL">

<!ENTITY % phrase "EM | STRONG | DFN | CODE |
                   SAMP | KBD | VAR | CITE | ABBR | ACRONYM" >

<!ENTITY % special
   "A | IMG | APPLET | OBJECT | FONT | BASEFONT | BR | SCRIPT |
    MAP | Q | SUB | SUP | SPAN | BDO | IFRAME">

<!ENTITY % formctrl "INPUT | SELECT | TEXTAREA | LABEL | BUTTON">

<!-- %inline; covers inline or "text-level" elements -->
<!ENTITY % inline "#PCDATA | %fontstyle; | %phrase; | %special; | %formctrl; ">

<!ELEMENT (%fontstyle;|%phrase;) - - (%inline;)*>
<!ATTLIST (%fontstyle;|%phrase;)
  %attrs;                              -- %coreattrs, %i18n, %events --
  >

<!ELEMENT (SUB|SUP) - - (%inline;)*    -- subscript, superscript -->
<!ATTLIST (SUB|SUP)
  %attrs;                              -- %coreattrs, %i18n, %events --
  >

<!ELEMENT SPAN - - (%inline;)*         -- generic language/style container -->
<!ATTLIST SPAN
  %attrs;                              -- %coreattrs, %i18n, %events --
  %reserved;			       -- reserved for possible future use --
  >

<!ELEMENT BDO - - (%inline;)*          -- I18N BiDi over-ride -->
<!ATTLIST BDO
  %coreattrs;                          -- id, class, style, title --
  lang        %LanguageCode; #IMPLIED  -- language code --
  dir         (ltr|rtl)      #required -- directionality --
  >

<!ELEMENT BASEFONT - O EMPTY           -- base font size -->
<!ATTLIST BASEFONT
  id          ID             #IMPLIED  -- document-wide unique id --
  size        CDATA          #required -- base font size for FONT elements --
  color       %Color;        #IMPLIED  -- text color --
  face        CDATA          #IMPLIED  -- comma-separated list of font names --
  >

<!ELEMENT FONT - - (%inline;)*         -- local change to font -->
<!ATTLIST FONT
  %coreattrs;                          -- id, class, style, title --
  %i18n;		               -- lang, dir --
  size        CDATA          #IMPLIED  -- [+|-]nn e.g. size="+1", size="4" --
  color       %Color;        #IMPLIED  -- text color --
  face        CDATA          #IMPLIED  -- comma-separated list of font names --
  >

<!ELEMENT BR - O EMPTY                 -- forced line break -->
<!ATTLIST BR
  %coreattrs;                          -- id, class, style, title --
  clear       (left|all|right|none) none -- control of text flow --
  >

<!--================== HTML content models ===============================-->

<!--
    HTML has two basic content models:

        %inline;     character level elements and text strings
        %block;      block-like elements e.g. paragraphs and lists
-->

<!ENTITY % block
     "P | %heading; | %list; | %preformatted; | DL | DIV | CENTER |
      NOSCRIPT | NOFRAMES | BLOCKQUOTE | FORM | ISINDEX | HR |
      TABLE | FIELDSET | ADDRESS">

<!ENTITY % flow "%block; | %inline;">

<!--=================== Document Body ====================================-->

<!ELEMENT BODY O O (%flow;)* +(INS|DEL) -- document body -->
<!ATTLIST BODY
  %attrs;                              -- %coreattrs, %i18n, %events --
  onload          %Script;   #IMPLIED  -- the document has been loaded --
  onunload        %Script;   #IMPLIED  -- the document has been removed --
  background      %URI;      #IMPLIED  -- texture tile for document
                                          background --
  %bodycolors;                         -- bgcolor, text, link, vlink, alink --
  >

<!ELEMENT ADDRESS - - ((%inline;)|P)*  -- information on author -->
<!ATTLIST ADDRESS
  %attrs;                              -- %coreattrs, %i18n, %events --
  >

<!ELEMENT DIV - - (%flow;)*            -- generic language/style container -->
<!ATTLIST DIV
  %attrs;                              -- %coreattrs, %i18n, %events --
  %align;                              -- align, text alignment --
  %reserved;                           -- reserved for possible future use --
  >

<!ELEMENT CENTER - - (%flow;)*         -- shorthand for DIV align=center -->
<!ATTLIST CENTER
  %attrs;                              -- %coreattrs, %i18n, %events --
  >

<!--================== The Anchor Element ================================-->

<!ENTITY % Shape "(rect|circle|poly|default)">
<!ENTITY % Coords "CDATA" -- comma-separated list of lengths -->

<!ELEMENT A - - (%inline;)* -(A)       -- anchor -->
<!ATTLIST A
  %attrs;                              -- %coreattrs, %i18n, %events --
  charset     %Charset;      #IMPLIED  -- char encoding of linked resource --
  type        %ContentType;  #IMPLIED  -- advisory content type --
  name        CDATA          #IMPLIED  -- named link end --
  hreflang    %LanguageCode; #IMPLIED  -- language code --
  target      %FrameTarget;  #IMPLIED  -- render in this frame --
  accesskey   %Character;    #IMPLIED  -- accessibility key character --
  shape       %Shape;        rect      -- for use with client-side image maps --
  coords      %Coords;       #IMPLIED  -- for use with client-side image maps --
  tabindex    NUMBER         #IMPLIED  -- position in tabbing order --
  onfocus     %Script;       #IMPLIED  -- the element got the focus --
  onblur      %Script;       #IMPLIED  -- the element lost the focus --
  >

<!--================== Client-side image maps ============================-->

<!-- These can be placed in the same document or grouped in a
     separate document although this isn't yet widely supported -->

<!ELEMENT MAP - - ((%block;) | AREA)+ -- client-side image map -->
<!ATTLIST MAP
  %attrs;                              -- %coreattrs, %i18n, %events --
  name        CDATA          #required -- for reference by usemap --
  >

<!ELEMENT AREA - O EMPTY               -- client-side image map area -->
<!ATTLIST AREA
  %attrs;                              -- %coreattrs, %i18n, %events --
  shape       %Shape;        rect      -- controls interpretation of coords --
  coords      %Coords;       #IMPLIED  -- comma-separated list of lengths --
  target      %FrameTarget;  #IMPLIED  -- render in this frame --
  nohref      (nohref)       #IMPLIED  -- this region has no action --
  alt         %Text;         #required -- short description --
  tabindex    NUMBER         #IMPLIED  -- position in tabbing order --
  accesskey   %Character;    #IMPLIED  -- accessibility key character --
  onfocus     %Script;       #IMPLIED  -- the element got the focus --
  onblur      %Script;       #IMPLIED  -- the element lost the focus --
  >

<!--================== The LINK Element ==================================-->

<!--
  Relationship values can be used in principle:

   a) for document specific toolbars/menus when used
      with the LINK element in document head e.g.
        start, contents, previous, next, index, end, help
   b) to link to a separate style sheet (rel=stylesheet)
   c) to make a link to a script (rel=script)
   d) by stylesheets to control how collections of
      html nodes are rendered into printed documents
   e) to make a link to a printable version of this document
      e.g. a postscript or pdf version (rel=alternate media=print)
-->

<!ELEMENT LINK - O EMPTY               -- a media-independent link -->
<!ATTLIST LINK
  %attrs;                              -- %coreattrs, %i18n, %events --
  charset     %Charset;      #IMPLIED  -- char encoding of linked resource --
  hreflang    %LanguageCode; #IMPLIED  -- language code --
  type        %ContentType;  #IMPLIED  -- advisory content type --
  media       %MediaDesc;    #IMPLIED  -- for rendering on these media --
  target      %FrameTarget;  #IMPLIED  -- render in this frame --
  >

<!--=================== Images ===========================================-->

<!-- Length defined in strict DTD for cellpadding/cellspacing -->
<!ENTITY % Length "CDATA" -- nn for pixels or nn% for percentage length -->
<!ENTITY % MultiLength "CDATA" -- pixel, percentage, or relative -->

<![ %HTML.Frameset; [
<!ENTITY % MultiLengths "CDATA" -- comma-separated list of MultiLength -->
]]>

<!ENTITY % Pixels "CDATA" -- integer representing length in pixels -->

<!ENTITY % IAlign "(top|middle|bottom|left|right)" -- center? -->

<!-- To avoid problems with text-only UAs as well as 
   to make image content understandable and navigable 
   to users of non-visual UAs, you need to provide
   a description with ALT, and avoid server-side image maps -->
<!ELEMENT IMG - O EMPTY                -- Embedded image -->
<!ATTLIST IMG
  %attrs;                              -- %coreattrs, %i18n, %events --
  src         %URI;          #required -- URI of image to embed --
  alt         %Text;         #required -- short description --
  longdesc    %URI;          #IMPLIED  -- link to long description
                                          (complements alt) --
  name        CDATA          #IMPLIED  -- name of image for scripting --
  height      %Length;       #IMPLIED  -- override height --
  width       %Length;       #IMPLIED  -- override width --
  usemap      %URI;          #IMPLIED  -- use client-side image map --
  ismap       (ismap)        #IMPLIED  -- use server-side image map --
  align       %IAlign;       #IMPLIED  -- vertical or horizontal alignment --
  border      %Pixels;       #IMPLIED  -- link border width --
  hspace      %Pixels;       #IMPLIED  -- horizontal gutter --
  vspace      %Pixels;       #IMPLIED  -- vertical gutter --
  >

<!-- USEMAP points to a MAP element which may be in this document
  or an external document, although the latter is not widely supported -->

<!--==================== OBJECT ======================================-->
<!--
  OBJECT is used to embed objects as part of HTML pages 
  PARAM elements should precede other content. SGML mixed content
  model technicality precludes specifying this formally ...
-->

<!ELEMENT OBJECT - - (PARAM | %flow;)*
 -- generic embedded object -->
<!ATTLIST OBJECT
  %attrs;                              -- %coreattrs, %i18n, %events --
  declare     (declare)      #IMPLIED  -- declare but don't instantiate flag --
  classid     %URI;          #IMPLIED  -- identifies an implementation --
  codebase    %URI;          #IMPLIED  -- base URI for classid, data, archive--
  data        %URI;          #IMPLIED  -- reference to object's data --
  type        %ContentType;  #IMPLIED  -- content type for data --
  codetype    %ContentType;  #IMPLIED  -- content type for code --
  archive     CDATA          #IMPLIED  -- space-separated list of URIs --
  standby     %Text;         #IMPLIED  -- message to show while loading --
  height      %Length;       #IMPLIED  -- override height --
  width       %Length;       #IMPLIED  -- override width --
  usemap      %URI;          #IMPLIED  -- use client-side image map --
  name        CDATA          #IMPLIED  -- submit as part of form --
  tabindex    NUMBER         #IMPLIED  -- position in tabbing order --
  align       %IAlign;       #IMPLIED  -- vertical or horizontal alignment --
  border      %Pixels;       #IMPLIED  -- link border width --
  hspace      %Pixels;       #IMPLIED  -- horizontal gutter --
  vspace      %Pixels;       #IMPLIED  -- vertical gutter --
  %reserved;                           -- reserved for possible future use --
  >

<!ELEMENT PARAM - O EMPTY              -- named property value -->
<!ATTLIST PARAM
  id          ID             #IMPLIED  -- document-wide unique id --
  %metainformation;                    -- metadata attributes --
  name        CDATA          #required -- property name --
  value       CDATA          #IMPLIED  -- property value --
  valuetype   (DATA|REF|OBJECT) DATA   -- How to interpret value --
  type        %ContentType;  #IMPLIED  -- content type for value
                                          when valuetype=ref --
  >

<!--=================== Java APPLET ==================================-->
<!--
  One of code or object attributes must be present.
  Place PARAM elements before other content.
-->
<!ELEMENT APPLET - - (PARAM | %flow;)* -- Java applet -->
<!ATTLIST APPLET
  %coreattrs;                          -- id, class, style, title --
  %metainformation;                    -- metadata attributes --
  codebase    %URI;          #IMPLIED  -- optional base URI for applet --
  archive     CDATA          #IMPLIED  -- comma-separated archive list --
  code        CDATA          #IMPLIED  -- applet class file --
  object      CDATA          #IMPLIED  -- serialized applet file --
  alt         %Text;         #IMPLIED  -- short description --
  name        CDATA          #IMPLIED  -- allows applets to find each other --
  width       %Length;       #required -- initial width --
  height      %Length;       #required -- initial height --
  align       %IAlign;       #IMPLIED  -- vertical or horizontal alignment --
  hspace      %Pixels;       #IMPLIED  -- horizontal gutter --
  vspace      %Pixels;       #IMPLIED  -- vertical gutter --
  >

<!--=================== Horizontal Rule ==================================-->

<!ELEMENT HR - O EMPTY -- horizontal rule -->
<!ATTLIST HR
  %attrs;                              -- %coreattrs, %i18n, %events --
  align       (left|center|right) #IMPLIED
  noshade     (noshade)      #IMPLIED
  size        %Pixels;       #IMPLIED
  width       %Length;       #IMPLIED
  >

<!--=================== Paragraphs =======================================-->

<!ELEMENT P - O (%inline;)*            -- paragraph -->
<!ATTLIST P
  %attrs;                              -- %coreattrs, %i18n, %events --
  %align;                              -- align, text alignment --
  >

<!--=================== Headings =========================================-->

<!--
  There are six levels of headings from H1 (the most important)
  to H6 (the least important).
-->

<!ELEMENT (%heading;)  - - (%inline;)* -- heading -->
<!ATTLIST (%heading;)
  %attrs;                              -- %coreattrs, %i18n, %events --
  %align;                              -- align, text alignment --
  >

<!--=================== Preformatted Text ================================-->

<!-- excludes markup for images and changes in font size -->
<!ENTITY % pre.exclusion "IMG|OBJECT|APPLET|BIG|SMALL|SUB|SUP|FONT|BASEFONT">

<!ELEMENT PRE - - (%inline;)* -(%pre.exclusion;) -- preformatted text -->
<!ATTLIST PRE
  %attrs;                              -- %coreattrs, %i18n, %events --
  width       NUMBER         #IMPLIED
  >

<!--===================== Inline Quotes ==================================-->

<!ELEMENT Q - - (%inline;)*            -- short inline quotation -->
<!ATTLIST Q
  %attrs;                              -- %coreattrs, %i18n, %events --
  cite        %URI;          #IMPLIED  -- URI for source document or msg --
  >

<!--=================== Block-like Quotes ================================-->

<!ELEMENT BLOCKQUOTE - - (%flow;)*     -- long quotation -->
<!ATTLIST BLOCKQUOTE
  %attrs;                              -- %coreattrs, %i18n, %events --
  cite        %URI;          #IMPLIED  -- URI for source document or msg --
  >

<!--=================== Inserted/Deleted Text ============================-->


<!-- INS/DEL are handled by inclusion on BODY -->
<!ELEMENT (INS|DEL) - - (%flow;)*      -- inserted text, deleted text -->
<!ATTLIST (INS|DEL)
  %attrs;                              -- %coreattrs, %i18n, %events --
  cite        %URI;          #IMPLIED  -- info on reason for change --
  datetime    %Datetime;     #IMPLIED  -- date and time of change --
  >

<!--=================== Lists ============================================-->

<!-- definition lists - DT for term, DD for its definition -->

<!ELEMENT DL - - (DT|DD)+              -- definition list -->
<!ATTLIST DL
  %attrs;                              -- %coreattrs, %i18n, %events --
  compact     (compact)      #IMPLIED  -- reduced interitem spacing --
  >

<!ELEMENT DT - O (%inline;)*           -- definition term -->
<!ELEMENT DD - O (%flow;)*             -- definition description -->
<!ATTLIST (DT|DD)
  %attrs;                              -- %coreattrs, %i18n, %events --
  >

<!-- Ordered lists (OL) Numbering style

    1   arablic numbers     1, 2, 3, ...
    a   lower alpha         a, b, c, ...
    A   upper alpha         A, B, C, ...
    i   lower roman         i, ii, iii, ...
    I   upper roman         I, II, III, ...

    The style is applied to the sequence number which by default
    is reset to 1 for the first list item in an ordered list.

    This can't be expressed directly in SGML due to case folding.
-->

<!ENTITY % OLStyle "CDATA"      -- constrained to: "(1|a|A|i|I)" -->

<!ELEMENT OL - - (LI)+                 -- ordered list -->
<!ATTLIST OL
  %attrs;                              -- %coreattrs, %i18n, %events --
  type        %OLStyle;      #IMPLIED  -- numbering style --
  compact     (compact)      #IMPLIED  -- reduced interitem spacing --
  start       NUMBER         #IMPLIED  -- starting sequence number --
  >

<!-- Unordered Lists (UL) bullet styles -->
<!ENTITY % ULStyle "(disc|square|circle)">

<!ELEMENT UL - - (LI)+                 -- unordered list -->
<!ATTLIST UL
  %attrs;                              -- %coreattrs, %i18n, %events --
  type        %ULStyle;      #IMPLIED  -- bullet style --
  compact     (compact)      #IMPLIED  -- reduced interitem spacing --
  >

<!ELEMENT (DIR|MENU) - - (LI)+ -(%block;) -- directory list, menu list -->
<!ATTLIST DIR
  %attrs;                              -- %coreattrs, %i18n, %events --
  compact     (compact)      #IMPLIED -- reduced interitem spacing --
  >
<!ATTLIST MENU
  %attrs;                              -- %coreattrs, %i18n, %events --
  compact     (compact)      #IMPLIED -- reduced interitem spacing --
  >

<!ENTITY % LIStyle "CDATA" -- constrained to: "(%ULStyle;|%OLStyle;)" -->

<!ELEMENT LI - O (%flow;)*             -- list item -->
<!ATTLIST LI
  %attrs;                              -- %coreattrs, %i18n, %events --
  type        %LIStyle;      #IMPLIED  -- list item style --
  value       NUMBER         #IMPLIED  -- reset sequence number --
  >

<!--================ Forms ===============================================-->
<!ELEMENT FORM - - (%flow;)* -(FORM)   -- interactive form -->
<!ATTLIST FORM
  %attrs;                              -- %coreattrs, %i18n, %events --
  action      %URI;          #required -- server-side form handler --
  method      (GET|POST)     GET       -- HTTP method used to submit the form--
  enctype     %ContentType;  "application/x-www-form-urlencoded"
  accept      %ContentTypes; #IMPLIED  -- list of MIME types for file upload --
  name        CDATA          #IMPLIED  -- name of form for scripting --
  onsubmit    %Script;       #IMPLIED  -- the form was submitted --
  onreset     %Script;       #IMPLIED  -- the form was reset --
  target      %FrameTarget;  #IMPLIED  -- render in this frame --
  accept-charset %Charsets;  #IMPLIED  -- list of supported charsets --
  >

<!-- Each label must not contain more than ONE field -->
<!ELEMENT LABEL - - (%inline;)* -(LABEL) -- form field label text -->
<!ATTLIST LABEL
  %attrs;                              -- %coreattrs, %i18n, %events --
  for         IDREF          #IMPLIED  -- matches field ID value --
  accesskey   %Character;    #IMPLIED  -- accessibility key character --
  onfocus     %Script;       #IMPLIED  -- the element got the focus --
  onblur      %Script;       #IMPLIED  -- the element lost the focus --
  >

<!ENTITY % InputType
  "(TEXT | PASSWORD | CHECKBOX |
    RADIO | SUBMIT | RESET |
    FILE | HIDDEN | IMAGE | BUTTON)"
   >

<!-- attribute name required for all but submit and reset -->
<!ELEMENT INPUT - O EMPTY              -- form control -->
<!ATTLIST INPUT
  %attrs;                              -- %coreattrs, %i18n, %events --
  type        %InputType;    TEXT      -- what kind of widget is needed --
  name        CDATA          #IMPLIED  -- submit as part of form --
  value       CDATA          #IMPLIED  -- Specify for radio buttons and checkboxes --
  checked     (checked)      #IMPLIED  -- for radio buttons and check boxes --
  disabled    (disabled)     #IMPLIED  -- unavailable in this context --
  readonly    (readonly)     #IMPLIED  -- for text and passwd --
  size        CDATA          #IMPLIED  -- specific to each type of field --
  maxlength   NUMBER         #IMPLIED  -- max chars for text fields --
  src         %URI;          #IMPLIED  -- for fields with images --
  alt         CDATA          #IMPLIED  -- short description --
  usemap      %URI;          #IMPLIED  -- use client-side image map --
  ismap       (ismap)        #IMPLIED  -- use server-side image map --
  tabindex    NUMBER         #IMPLIED  -- position in tabbing order --
  accesskey   %Character;    #IMPLIED  -- accessibility key character --
  onfocus     %Script;       #IMPLIED  -- the element got the focus --
  onblur      %Script;       #IMPLIED  -- the element lost the focus --
  onselect    %Script;       #IMPLIED  -- some text was selected --
  onchange    %Script;       #IMPLIED  -- the element value was changed --
  accept      %ContentTypes; #IMPLIED  -- list of MIME types for file upload --
  align       %IAlign;       #IMPLIED  -- vertical or horizontal alignment --
  %reserved;                           -- reserved for possible future use --
  >

<!ELEMENT SELECT - - (OPTGROUP|OPTION)+ -- option selector -->
<!ATTLIST SELECT
  %attrs;                              -- %coreattrs, %i18n, %events --
  name        CDATA          #IMPLIED  -- field name --
  size        NUMBER         #IMPLIED  -- rows visible --
  multiple    (multiple)     #IMPLIED  -- default is single selection --
  disabled    (disabled)     #IMPLIED  -- unavailable in this context --
  tabindex    NUMBER         #IMPLIED  -- position in tabbing order --
  onfocus     %Script;       #IMPLIED  -- the element got the focus --
  onblur      %Script;       #IMPLIED  -- the element lost the focus --
  onchange    %Script;       #IMPLIED  -- the element value was changed --
  %reserved;                           -- reserved for possible future use --
  >

<!ELEMENT OPTGROUP - - (OPTION)+ -- option group -->
<!ATTLIST OPTGROUP
  %attrs;                              -- %coreattrs, %i18n, %events --
  disabled    (disabled)     #IMPLIED  -- unavailable in this context --
  label       %Text;         #required -- for use in hierarchical menus --
  >

<!ELEMENT OPTION - O (#PCDATA)         -- selectable choice -->
<!ATTLIST OPTION
  %attrs;                              -- %coreattrs, %i18n, %events --
  selected    (selected)     #IMPLIED
  disabled    (disabled)     #IMPLIED  -- unavailable in this context --
  label       %Text;         #IMPLIED  -- for use in hierarchical menus --
  value       CDATA          #IMPLIED  -- defaults to element content --
  >

<!ELEMENT TEXTAREA - - (#PCDATA)       -- multi-line text field -->
<!ATTLIST TEXTAREA
  %attrs;                              -- %coreattrs, %i18n, %events --
  name        CDATA          #IMPLIED
  rows        NUMBER         #required
  cols        NUMBER         #required
  disabled    (disabled)     #IMPLIED  -- unavailable in this context --
  readonly    (readonly)     #IMPLIED
  tabindex    NUMBER         #IMPLIED  -- position in tabbing order --
  accesskey   %Character;    #IMPLIED  -- accessibility key character --
  onfocus     %Script;       #IMPLIED  -- the element got the focus --
  onblur      %Script;       #IMPLIED  -- the element lost the focus --
  onselect    %Script;       #IMPLIED  -- some text was selected --
  onchange    %Script;       #IMPLIED  -- the element value was changed --
  %reserved;                           -- reserved for possible future use --
  >

<!--
  #PCDATA is to solve the mixed content problem,
  per specification only whitespace is allowed there!
 -->
<!ELEMENT FIELDSET - - (#PCDATA,LEGEND,(%flow;)*) -- form control group -->
<!ATTLIST FIELDSET
  %attrs;                              -- %coreattrs, %i18n, %events --
  >

<!ELEMENT LEGEND - - (%inline;)*       -- fieldset legend -->
<!ENTITY % LAlign "(top|bottom|left|right)">

<!ATTLIST LEGEND
  %attrs;                              -- %coreattrs, %i18n, %events --
  accesskey   %Character;    #IMPLIED  -- accessibility key character --
  align       %LAlign;       #IMPLIED  -- relative to fieldset --
  >

<!ELEMENT BUTTON - -
     (%flow;)* -(A|%formctrl;|FORM|ISINDEX|FIELDSET|IFRAME)
     -- push button -->
<!ATTLIST BUTTON
  %attrs;                              -- %coreattrs, %i18n, %events --
  name        CDATA          #IMPLIED
  value       CDATA          #IMPLIED  -- sent to server when submitted --
  type        (button|submit|reset) submit -- for use as form button --
  disabled    (disabled)     #IMPLIED  -- unavailable in this context --
  tabindex    NUMBER         #IMPLIED  -- position in tabbing order --
  accesskey   %Character;    #IMPLIED  -- accessibility key character --
  onfocus     %Script;       #IMPLIED  -- the element got the focus --
  onblur      %Script;       #IMPLIED  -- the element lost the focus --
  %reserved;                           -- reserved for possible future use --
  >

<!--======================= Tables =======================================-->

<!-- IETF HTML table standard, see [RFC1942] -->

<!--
 The BORDER attribute sets the thickness of the frame around the
 table. The default units are screen pixels.

 The FRAME attribute specifies which parts of the frame around
 the table should be rendered. The values are not the same as
 CALS to avoid a name clash with the VALIGN attribute.

 The value "border" is included for backwards compatibility with
 <TABLE BORDER> which yields frame=border and border=implied
 For <TABLE BORDER=1> you get border=1 and frame=implied. In this
 case, it is appropriate to treat this as frame=border for backwards
 compatibility with deployed browsers.
-->
<!ENTITY % TFrame "(void|above|below|hsides|lhs|rhs|vsides|box|border)">

<!--
 The RULES attribute defines which rules to draw between cells:

 If RULES is absent then assume:
     "none" if BORDER is absent or BORDER=0 otherwise "all"
-->

<!ENTITY % TRules "(none | groups | rows | cols | all)">
  
<!-- horizontal placement of table relative to document -->
<!ENTITY % TAlign "(left|center|right)">

<!-- horizontal alignment attributes for cell contents -->
<!ENTITY % cellhalign
  "align      (left|center|right|justify|char) #IMPLIED
   char       %Character;    #IMPLIED  -- alignment char, e.g. char=':' --
   charoff    %Length;       #IMPLIED  -- offset for alignment char --"
  >

<!-- vertical alignment attributes for cell contents -->
<!ENTITY % cellvalign
  "valign     (top|middle|bottom|baseline) #IMPLIED"
  >

<!ELEMENT TABLE - -
     (CAPTION?, (COL*|COLGROUP*), THEAD?, TFOOT?, TBODY+)>
<!ELEMENT CAPTION  - - (%inline;)*     -- table caption -->
<!ELEMENT THEAD    - O (TR)+           -- table header -->
<!ELEMENT TFOOT    - O (TR)+           -- table footer -->
<!ELEMENT TBODY    O O (TR)+           -- table body -->
<!ELEMENT COLGROUP - O (COL)*          -- table column group -->
<!ELEMENT COL      - O EMPTY           -- table column -->
<!ELEMENT TR       - O (TH|TD)+        -- table row -->
<!ELEMENT (TH|TD)  - O (%flow;)*       -- table header cell, table data cell-->

<!ATTLIST TABLE                        -- table element --
  %attrs;                              -- %coreattrs, %i18n, %events --
  summary     %Text;         #IMPLIED  -- purpose/structure for speech output--
  width       %Length;       #IMPLIED  -- table width --
  border      %Pixels;       #IMPLIED  -- controls frame width around table --
  frame       %TFrame;       #IMPLIED  -- which parts of frame to render --
  rules       %TRules;       #IMPLIED  -- rulings between rows and cols --
  cellspacing %Length;       #IMPLIED  -- spacing between cells --
  cellpadding %Length;       #IMPLIED  -- spacing within cells --
  align       %TAlign;       #IMPLIED  -- table position relative to window --
  bgcolor     %Color;        #IMPLIED  -- background color for cells --
  %reserved;                           -- reserved for possible future use --
  datapagesize CDATA         #IMPLIED  -- reserved for possible future use --
  >

<!ENTITY % CAlign "(top|bottom|left|right)">

<!ATTLIST CAPTION
  %attrs;                              -- %coreattrs, %i18n, %events --
  align       %CAlign;       #IMPLIED  -- relative to table --
  >

<!--
COLGROUP groups a set of COL elements. It allows you to group
several semantically related columns together.
-->
<!ATTLIST COLGROUP
  %attrs;                              -- %coreattrs, %i18n, %events --
  span        NUMBER         1         -- default number of columns in group --
  width       %MultiLength;  #IMPLIED  -- default width for enclosed COLs --
  %cellhalign;                         -- horizontal alignment in cells --
  %cellvalign;                         -- vertical alignment in cells --
  >

<!--
 COL elements define the alignment properties for cells in
 one or more columns.

 The WIDTH attribute specifies the width of the columns, e.g.

     width=64        width in screen pixels
     width=0.5*      relative width of 0.5

 The SPAN attribute causes the attributes of one
 COL element to apply to more than one column.
-->
<!ATTLIST COL                          -- column groups and properties --
  %attrs;                              -- %coreattrs, %i18n, %events --
  span        NUMBER         1         -- COL attributes affect N columns --
  width       %MultiLength;  #IMPLIED  -- column width specification --
  %cellhalign;                         -- horizontal alignment in cells --
  %cellvalign;                         -- vertical alignment in cells --
  >

<!--
    Use THEAD to duplicate headers when breaking table
    across page boundaries, or for static headers when
    TBODY sections are rendered in scrolling panel.

    Use TFOOT to duplicate footers when breaking table
    across page boundaries, or for static footers when
    TBODY sections are rendered in scrolling panel.

    Use multiple TBODY sections when rules are needed
    between groups of table rows.
-->
<!ATTLIST (THEAD|TBODY|TFOOT)          -- table section --
  %attrs;                              -- %coreattrs, %i18n, %events --
  %cellhalign;                         -- horizontal alignment in cells --
  %cellvalign;                         -- vertical alignment in cells --
  >

<!ATTLIST TR                           -- table row --
  %attrs;                              -- %coreattrs, %i18n, %events --
  %cellhalign;                         -- horizontal alignment in cells --
  %cellvalign;                         -- vertical alignment in cells --
  bgcolor     %Color;        #IMPLIED  -- background color for row --
  >


<!-- Scope is simpler than headers attribute for common tables -->
<!ENTITY % Scope "(row|col|rowgroup|colgroup)">

<!-- TH is for headers, TD for data, but for cells acting as both use TD -->
<!ATTLIST (TH|TD)                      -- header or data cell --
  %attrs;                              -- %coreattrs, %i18n, %events --
  abbr        %Text;         #IMPLIED  -- abbreviation for header cell --
  axis        CDATA          #IMPLIED  -- comma-separated list of related headers--
  headers     IDREFS         #IMPLIED  -- list of id's for header cells --
  scope       %Scope;        #IMPLIED  -- scope covered by header cells --
  rowspan     NUMBER         1         -- number of rows spanned by cell --
  colspan     NUMBER         1         -- number of cols spanned by cell --
  %cellhalign;                         -- horizontal alignment in cells --
  %cellvalign;                         -- vertical alignment in cells --
  nowrap      (nowrap)       #IMPLIED  -- suppress word wrap --
  bgcolor     %Color;        #IMPLIED  -- cell background color --
  width       %Length;       #IMPLIED  -- width for cell --
  height      %Length;       #IMPLIED  -- height for cell --
  >

<!--================== Document Frames ===================================-->

<!--
  The content model for HTML documents depends on whether the HEAD is
  followed by a FRAMESET or BODY element. The widespread omission of
  the BODY start tag makes it impractical to define the content model
  without the use of a marked section.
-->

<![ %HTML.Frameset; [
<!ELEMENT FRAMESET - - ((FRAMESET|FRAME)+ & NOFRAMES?) -- window subdivision-->
<!ATTLIST FRAMESET
  %coreattrs;                          -- id, class, style, title --
  rows        %MultiLengths; #IMPLIED  -- list of lengths,
                                          default: 100% (1 row) --
  cols        %MultiLengths; #IMPLIED  -- list of lengths,
                                          default: 100% (1 col) --
  onload      %Script;       #IMPLIED  -- all the frames have been loaded  -- 
  onunload    %Script;       #IMPLIED  -- all the frames have been removed -- 
  >
]]>

<![ %HTML.Frameset; [
<!-- reserved frame names start with "_" otherwise starts with letter -->
<!ELEMENT FRAME - O EMPTY              -- subwindow -->
<!ATTLIST FRAME
  %coreattrs;                          -- id, class, style, title --
  longdesc    %URI;          #IMPLIED  -- link to long description
                                          (complements title) --
  name        CDATA          #IMPLIED  -- name of frame for targetting --
  src         %URI;          #IMPLIED  -- source of frame content --
  frameborder (1|0)          1         -- request frame borders? --
  marginwidth %Pixels;       #IMPLIED  -- margin widths in pixels --
  marginheight %Pixels;      #IMPLIED  -- margin height in pixels --
  noresize    (noresize)     #IMPLIED  -- allow users to resize frames? --
  scrolling   (yes|no|auto)  auto      -- scrollbar or none --
  >
]]>

<!ELEMENT IFRAME - - (%flow;)*         -- inline subwindow -->
<!ATTLIST IFRAME
  %coreattrs;                          -- id, class, style, title --
  longdesc    %URI;          #IMPLIED  -- link to long description
                                          (complements title) --
  name        CDATA          #IMPLIED  -- name of frame for targetting --
  src         %URI;          #IMPLIED  -- source of frame content --
  frameborder (1|0)          1         -- request frame borders? --
  marginwidth %Pixels;       #IMPLIED  -- margin widths in pixels --
  marginheight %Pixels;      #IMPLIED  -- margin height in pixels --
  scrolling   (yes|no|auto)  auto      -- scrollbar or none --
  align       %IAlign;       #IMPLIED  -- vertical or horizontal alignment --
  height      %Length;       #IMPLIED  -- frame height --
  width       %Length;       #IMPLIED  -- frame width --
  >

<![ %HTML.Frameset; [
<!ENTITY % noframes.content "(BODY) -(NOFRAMES)">
]]>

<!ENTITY % noframes.content "(%flow;)*">

<!ELEMENT NOFRAMES - - %noframes.content;
 -- alternate content container for non frame-based rendering -->
<!ATTLIST NOFRAMES
  %attrs;                              -- %coreattrs, %i18n, %events --
  >

<!--================ Document Head =======================================-->
<!-- %head.misc; defined earlier on as "SCRIPT|STYLE|META|LINK|OBJECT" -->
<!ENTITY % head.content "TITLE & ISINDEX? & BASE?">

<!ELEMENT HEAD O O (%head.content;) +(%head.misc;) -- document head -->
<!ATTLIST HEAD
  %attrs;
  >

<!-- The TITLE element is not considered part of the flow of text.
       It should be displayed, for example as the page header or
       window title. Exactly one title is required per document.
    -->
<!ELEMENT TITLE - - (#PCDATA) -(%head.misc;) -- document title -->
<!ATTLIST TITLE %attrs>

<!ELEMENT ISINDEX - O EMPTY            -- single line prompt -->
<!ATTLIST ISINDEX
  %coreattrs;                          -- id, class, style, title --
  %i18n;                               -- lang, dir --
  prompt      %Text;         #IMPLIED  -- prompt message -->

<!ELEMENT BASE - O EMPTY               -- document base URI -->
<!ATTLIST BASE
  href        %URI;          #IMPLIED  -- URI that acts as base URI --
  target      %FrameTarget;  #IMPLIED  -- render in this frame --
  >

<!ELEMENT META - O EMPTY               -- generic metainformation -->
<!ATTLIST META
  %i18n;                               -- lang, dir, for use with content --
  %metainformation;
  http-equiv  NAME           #IMPLIED  -- HTTP response header name  --
  name        NAME           #IMPLIED  -- metainformation name --
  scheme      CDATA          #IMPLIED  -- select form of content --
  >

<!ELEMENT STYLE - - %StyleSheet        -- style info -->
<!ATTLIST STYLE
  %i18n;                               -- lang, dir, for use with title --
  type        %ContentType;  #required -- content type of style language --
  media       %MediaDesc;    #IMPLIED  -- designed for use with these media --
  title       %Text;         #IMPLIED  -- advisory title --
  >

<!ELEMENT SCRIPT - - %Script;          -- script statements -->
<!ATTLIST SCRIPT
  charset     %Charset;      #IMPLIED  -- char encoding of linked resource --
  type        %ContentType;  #required -- content type of script language --
  language    CDATA          #IMPLIED  -- predefined script language name --
  src         %URI;          #IMPLIED  -- URI for an external script --
  defer       (defer)        #IMPLIED  -- UA may defer execution of script --
  event       CDATA          #IMPLIED  -- reserved for possible future use --
  for         %URI;          #IMPLIED  -- reserved for possible future use --
  >

<!ELEMENT NOSCRIPT - - (%flow;)*
  -- alternate content container for non script-based rendering -->
<!ATTLIST NOSCRIPT
  %attrs;                              -- %coreattrs, %i18n, %events --
  >

<!--================ Document Structure ==================================-->
<![ %HTML.Frameset; [
<!ENTITY % html.content "HEAD, FRAMESET">
]]>

<!ENTITY % html.content "HEAD, BODY">

<!ELEMENT HTML O O (%html.content;)    -- document root element -->
<!ATTLIST HTML
  %attrs;
  >

B. About this Document

B.1 History

This section is non-normative.

In early 2004, Mark Birbeck published a document named "RDF in XHTML" via the XHTML2 Working Group wherein he laid the groundwork for what would eventually become RDFa (The Resource Description Framework in Attributes).

In 2006, the work was co-sponsored by the Semantic Web Deployment Work Group, which began to formalize a technology to express semantic data in XHTML. This technology was successfully developed and reached consensus at the W3C, later published as an official W3C Recommendation. While HTML provides a mechanism to express the structure of a document (title, paragraphs, links), RDFa provides a mechanism to express the meaning in a document (people, places, events).

The document, titled "RDF in XHTML: Syntax and Processing" [XHTML-RDFA], defined a set of attributes and rules for processing those attributes that resulted in the output of machine-readable semantic data. While the document applied to XHTML, the attributes and rules were always intended to operate across any tree-based structure containing attributes on tree nodes (such as HTML4, SVG and ODF).

While RDFa was initially specified for use in XHTML, adoption by a number of large organizations on the Web spurred RDFa's use in non-XHTML languages. Its use in HTML4, before an official specification was developed for those languages, caused concern regarding document conformance.

Over the years, the members of the RDFa Task Force had discussed the possibility of applying the same attributes and processing rules outlined in the XHTML+RDFa specification to all HTML family documents. By design, the possibility of a unified semantic data expression mechanism between all HTML and XHTML family documents was squarely in the realm of possibility.

An RDFa Working Group was created in 2010 to address the issues concerning multiple language implementations of RDFa. The XHTML+RDFa document was split into a base specification, called RDFa Core 1.1 [RDFA-CORE], and thin specifications that layer above RDFa Core 1.1. The XHTML+RDFa 1.1 specification [XHTML-RDFA] is an example of such a thin specification. This document, also a thin specification, is targeted at HTML4, HTML5 and XHTML5.

This document describes the extensions to the RDFa Core 1.1 specification that permits the use of RDFa in all HTML family documents. By using the attributes and processing rules described in the RDFa Core 1.1 specification and heeding the minor changes in this document, authors can generate markup that produces the same semantic data output in HTML4, HTML5 and XHTML5.

B.2 Change History

This section is non-normative.

2009-10-15: First version of the RDFa for HTML4, HTML5 and XHTML5.

2010-03-04: Updated HTML5 coercion to Infoset rules, preservation of namespaces in Infoset and DOM2-based processors, clarifying how to extract RDFa attributes via Infoset, how to extract RDFa attributes via DOM2.

2010-05-02: Inheritance of basic processing rules from RDFa 1.1 [RDFA-CORE], instead of XHTML+RDFa 1.0 [RDFA-SYNTAX], inclusion of the HTML Default Vocabulary Terms, inclusion of a HTML 4.01 + RDFa 1.1 DTD for validation purposes.

2010-06-24: Inheritance of basic processing rules from RDFa 1.1 [RDFA-CORE], instead of XHTML+RDFa 1.0 [RDFA-SYNTAX], inclusion of the HTML Default Vocabulary Terms, added HTML 4.01 + RDFa 1.1 DTD for validation purposes, added normative definition of @version attribute.

2010-10-19: Removal of @version attribute, migrated HTML Vocabulary Terms to RDFa Profile document, added statement to send comments to the HTML WG bug tracker.

B.3 Acknowledgments

This section is non-normative.

At the time of publication, the members of the RDFa Working Group were:

Ben Adida (chair), Benjamin Adrian, Mark Birbeck, Ivan Herman (staff contact), Toby Inkster, Shane McCarron, Knud Möller, Steven Pemberton, Nathan Rixham, Manu Sporny (chair)

At the time of publication, the members of the HTML Working Group were:

Colin Aarts, Miller Abel, D.R.Imanuel Abromeit, Robert Accettura, Chris Adams, Ben Adida, Arihant Agarwal, yael aharon, Jim Allan, Kazuyuki Ashimura, Tab Atkins Jr., Stephen Axthelm, Mark Baker, Christopher Bank, Bogdan Baraszkiewicz, Gary Barber, David Baron, Adam Barth, Aaron Bassett, Adrian Bateman, Matthias Bauer, Johannes Behr, John-Mark Bell, Robin Berjon, Arve Bersvendsen, Levent Besik, David Bills, Mark Birbeck, David Bolter, Anders Bondehagen, Marco Bonetti, Glenn Bookout, Sierk Bornemann, Denis Boudreau, Ben Boyle, River Brandon, Judy Brewer, Dan Brickley, Per-Erik Brodin, Thomas Broyer, Don Brutzman, Craig Buckler, Dick Bulterman, Daniel Burnett, Noel Bush, Andrew Buzzell, Craig Cadwallader, Sally Cain, Ben Caldwell, Brian Campbell, Carlos Cardona, Maurice Carey, Eric Carlson, Laura Carlson, Gavin Carothers, Wayne Carr, Tomas Caspers, James Cassell, Tantek Çelik, Namachivayam Chelladurai, David Child, Wendy Chisholm, David Choi, wu chou, Edward Cianci, Michaeljohn Clement, Richard Conyard, Michael Cooper, Paul Cotton (chair), Chris Cressman, Brendan Cullen, Joseph D'Andrea, Mohammed DADAS, Deborah Dahl, Erik Dahlström, David Dailey, Will Daniels, Ivan De Marino, Tommaso Donnarumma, Chris Double, John Drinkwater, Marc Drumm, Mark DuBois, Karl Dubost, Andrew Duck, Clair Dunn, Henrik Dvergsdal, Dean Edridge, Anand Samuel Edwin, Eric Eggert, S Emerson, Ivan Enderlin, Rob Ennals, Jean-Pierre EVAIN, Steve Faulkner, Andrew Fedoniouk, Alexey Feldgendler, Alejandro Fernandez, Ian Fette, Roy Fielding, Markus Fischer, David Fisher, Nick Fitzsimons, Mark Foladare, John Foliot, Kelly Ford, Jason Fowler, Geoff Freed, Matthew Freels, Steve Gabrio, Mike Ganner, Patrick Garies, Olivier Gendrin, Giovanni Gentili, Dragos Georgita, Dimitri Glazkov, Daniel Glazman, Eliot Graff, James Graham, Aryeh Gregor, Chris Griego, Jonathan Griffin, Guillaume Guérin, Jon Gunderson, Lars Gunther, Raghavan Gurumurthy, Markku Hakkinen, Marcin Hanclik, Matt Harris, Chris Hay, Sean Hayes, Ian Hickson, Thomas Higginbotham, Krijn Hoetmer, Laurens Holst, Mikko Honkala, Tobias Horvath, Peter Howkins, Raul Hudea, Dale Hudjik, Jon Hughes, Lachlan Hunt, David Hyatt, David Håsäther, Eihab Ibrahim, Kunter Ilalan, Toby Inkster, Patrick D F Ion, Erik Isaksen, Richard Ishida, Moto Ishizawa, Yudai Iwasaki, Dean Jackson, Justin James, Arthur Jennings, Arne Johannessen, Kenny Johar, Sam Johnston, Sam Johnston, Doug Jones, Wilhelm Joys Andersen, Philip Jägenstedt, Susanne Jäger, Yehuda Katz, Jeremy Keith, Serge K. Keller, John Kemp, Kazuhito Kidachi, Don Kiely, Dowan Kim, Sebastian Kippe, Martin Kliehm, Egor Kloos, Graham Klyne, Justin Anthony Knapp, Masatomo Kobayashi, Marcel Koeppen, Jirka Kosek, Anssi Kostiainen, Lee Kowalkowski, Michael Kozakewich, Maxim Kozhuh, Peter Krantz, Keith Krieger, Kris Krueger, Mayank Kumar, Michael Köller, Jonatan Lander, Lucas Larson, Bruce Lawson, Josh Lawton, Nicolas LE GALL, Chasen Le Hara, Philippe Le Hégaret, Jane Lee, Kangchan Lee, WonSuk Lee, Niels Leenheer, Dean Leigh, Travis Leithead, Gez Lemon, Kornel Lesinski, aurélien levy, Scott Lewis, Li Li, Danny Liang, Jake Liddell, Håkon Wium Lie, Jedi Lin, Andy Lintner, Feng Liu, Jianjun Liu, Robert Love, Guillaume Ludwig, Andrew Maben, Shefik Macauley, Matthew MacKenzie, Krzysztof Maczynski, Vilem Malek, Murray Maloney, Jatinder Mann, Gabriel Mansour, Zhihong Mao, Bilgehan Maras, Chris Marrin, Robert Marshall, Andrew Martin, Alfonso Martínez de Lizarrondo, Luca Mascaro, Larry Masinter, Bill Mason, Matthew May, Cena Mayo, Charles McCathieNevile, Cameron McCormack, Martin McEvoy, Benjamin Meadowcroft, Shawn Medero, Reinier Meenhorst, Jens Meiert, Jakob Melander, Markus Mielke, Ben Millard, Mark Miller, Ryan Mitchell, Katsuhiko Momoi, Stefan More, Terry Morris, Thomas Morris, Daniel Morrison, Simon Myers, Stuart Myles, Marco Neumann, Sharon Newman, Tom Nguyen, Andrey Nikanorov, Jer Noble, Andrew Norman, Joshue O Connor, Robert O'Callahan, Edward O'Connor, Matt Obee, Frank Olivier, Ryan Orr, Debi Orton, Kulanthaivel Palanichamy, Frank Palinkas, Soohong Daniel Park, Sylvain Pasche, Chris Pearce, Brian Peppler, Ariel Pérez, Adele Peterson, Silvia Pfeiffer, Simon Pieters, Benoit Piette, Thomas Pike, Gabriel Pizzorno, Andrew Polk, Andrei Polushin, Pasquale Popolizio, Harri Porten, Alexey Proskuryakov, Michael Puls II, Juan Quemada, T.V. Raman, Andrew Ramsden, Arun Ranganathan, Marco Ranon, Matthew Ratzloff, Matthew Raymond, Ron Reisor, Daniel Renfer, Julian Reschke, Cyra Richardson, Ole Riesenberg, Anders Ringqvist, Adam Roben, Alex Robinson, Jude Robinson, Leonard Rosenthol, Gregory Rosmaita, Tony Ross, Steven Roussey, Sam Ruby (chair), Pietro Russo, Weston Ruter, Monikandan S, Lucas Sa, Rene Saarsoo, Sajid Saiyed, Janina Sajka, joaquin Salvachua, satish sangaru, Samuel Santos, Sorin Sbarnea, Daniel Schattenkirchner, Doug Schepers, Kai Scheppe, Christian Schmidt, Sebastian Schnitzenbaumer, Christopher Schroeder, Richard Schwerdtfeger, Gavin Sharp, Cynthia Shelly, Jonas Sicking, Andrew Sidwell, Leif Halvard Silli, David Singer, Henri Sivonen, Brian Skahan, Kenneth Sklander, Dan Smith, Dylan Smith, Michael(tm) Smith (staff contact), Sam Sneddon, Gnanasekar S Somanathan, Manu Sporny, Elliott Sprehn, Maciej Stachowiak (chair), Vicki Stanton, Hallvord Steen, Johnny Stenback, Robert Stern, Peter Stewart, Stephen Stewart, Andrew Stibbard, Bruce Stockwell, Motti Strom, Oli Studholme, Mihai Sucan, Bryan Sullivan, Marat Tanalin, Mike Taylor, Philip Taylor, Sander Tekelenburg, Shane Thacker, Nik Thierry, Morten Tollefsen, Dominik Tomaszuk, Dzung Tran, Monika Trebo, Mark Turnage, Jason Turnbull, Scott Turner, Michael Turnwall, Matthew Turvey, Asbjørn Ulsberg, Wesley Upchurch, Ojan Vafai, Erik van Kempen, Anne van Kesteren, Sander van Lambalgen, Charl van Niekerk, Tim van Oostrom, Christopher Varley, Jean-Charles Verdié, John Vernaleo, Scott Vesey, Sigbjørn Vik, Laurent Vilday, Kent Villard, Jace Voracek, David Voth, Vladimir Vukicevic, Johnson Wang, Martijn Wargers, Jonathan Watt, Kyle Weems, Samuel Weinig, Ian Wessman, Ben West, Jason White, Michael Whitley, Joe Williams, Andrew Wilson, Chris Wilson, Doug Wright, Han Xu, Mateo Yadarola, Masataka Yakura, Channy Yun, Michael Zajac, Boris Zbarsky, Milan Zoufal, Michael zur Muehlen

HTML+RDFa 1.1

Support for RDFa in HTML4 and HTML5

W3C Working Draft 19 October 2010

Abstract

Status of This Document

Table of Contents

1. Introduction

2. Conformance

2.1 Document Conformance

2.2 RDFa Processor Conformance

2.3 User Agent Conformance

3. Extensions to RDFa Core 1.1

3.1 Additional RDFa Processing Rules

3.2 Modifying the Input Document

3.3 Specifying the language for a literal

3.4 Invalid XMLLiteral values

3.5 `xmlns:`-Prefixed Attributes

4. Extensions to the HTML5 Syntax

4.1 The RDFa Attributes and Valid Values

4.2 Conformance Criteria for `xmlns:`-Prefixed Attributes

4.3 Preserving Namespaces via Coercion to Infoset

4.4 Infoset-based Processors

4.4.1 Extracting URI Mappings from Infosets

4.4.2 Processing RDFa Attributes

4.5 DOM Level 2-based Processors

4.5.1 Extracting URI Mappings from DOMs

4.5.2 Processing RDFa Attributes

A. Validation

A.1 The HTML 4.01 + RDFa 1.1 DTD

B. About this Document

B.1 History

B.2 Change History

B.3 Acknowledgments

C. References

C.1 Normative references

C.2 Informative references

HTML+RDFa 1.1

Support for RDFa in HTML4 and HTML5

W3C Working Draft 19 October 2010

Abstract

Status of This Document

Table of Contents

1. Introduction

2. Conformance

2.1 Document Conformance

2.2 RDFa Processor Conformance

2.3 User Agent Conformance

3. Extensions to RDFa Core 1.1

3.1 Additional RDFa Processing Rules

3.2 Modifying the Input Document

3.3 Specifying the language for a literal

3.4 Invalid XMLLiteral values

3.5 xmlns:-Prefixed Attributes

4. Extensions to the HTML5 Syntax

4.1 The RDFa Attributes and Valid Values

4.2 Conformance Criteria for xmlns:-Prefixed Attributes

4.3 Preserving Namespaces via Coercion to Infoset

4.4 Infoset-based Processors

4.4.1 Extracting URI Mappings from Infosets

4.4.2 Processing RDFa Attributes

4.5 DOM Level 2-based Processors

4.5.1 Extracting URI Mappings from DOMs

4.5.2 Processing RDFa Attributes

A. Validation

A.1 The HTML 4.01 + RDFa 1.1 DTD

B. About this Document

B.1 History

B.2 Change History

B.3 Acknowledgments

C. References

C.1 Normative references

C.2 Informative references

3.5 `xmlns:`-Prefixed Attributes

4.2 Conformance Criteria for `xmlns:`-Prefixed Attributes