|
ソスソスソスソスソスEソスソスソスツの撰ソスソスソスソスツ具ソスソスソスソスHソスAソスソスソスソスソスソスH ソスiソスLソスjソスソスソスソスZソスソス
ソスRソス`ソスソスソスソスソスソスsソスフ抵ソスソスHソスソス
|
|
|
ソスソスソスソスソスル(ソス|ソズ・ソズ暦ソスソスj >> ソスPソスDJISソスKソスiソスiソスソスソス{ソスHソスニ規ソスiソスj ソス| JISソスKソスiソスソスソスXソスg
|
|
|
|
|
|
|
ソスソスJISソスKソスi >> B.ソスソスハ機ソスB >> ソスHソスソスEソスWソスOソズ(ソスソスソズ) |
|
|
|
JISソスKソスiソスiソスソスソス{ソスHソスニ規ソスiソスjソスナ、
- B.ソスソスハ機ソスB >> ソスHソスソスEソスWソスOソズ(ソスソスソズ)
ソスノ包ソスソズゑソスソスソスソスAJISソスKソスiソスソスソスXソスgソスナゑソスソスB
ソスKソスiソスヤ搾ソスソスAソスソスソスsソスNソスxソスAソスKソスiソスソスソスフ(ソスソスソス{ソス齧シソスA
ソスpソス齧シソスjソスソスソスmソスFソスナゑソスソスワゑソスソスB
ソスソスソスAソスソスソスフ規ソスiソスソスソスナ新ソスナでゑソスソス驍ゥソスヌゑソスソスソスソスヘ必
ソスソスソスソスソスソスソスソスソスナゑソスソスmソスFソスソスソスソスソスソスソスソスソスB
JISソスKソスiソスヨ連ソスナはゑソスソスソスソスソスソスソスソスソスQソスlソスノどゑソスソスソスソスB
>> ソスソスソスソスソスル(ソスソスソスソスソスj
>> ソスソスソスソスソスル(JISソスソスソスXソスgソスj
>> ソスソスソスソスソスル(JISソスpソスソスj
>> ソスラ具ソスソスソスソスソス
|
|
|
ソスy B.ソスソスハ機ソスB >> ソスHソスソスEソスWソスOソズ(ソスソスソズ) ソスz |
- JIS B 4002:1998
- ソスXソスgソスソスソス[ソスgソスVソスソスソスソスソスNソスソスソスソスソスソスソスツ会ソス]ソスHソスソス@ソス\ソス@ソスVソスソスソスソスソスNソスaソスyソスムシソスソスソスソスソスNソスlソスpソスソスソスフ撰ソスソス@
- Rotating tools with parallel shanks -- Diameters of shanks and sizes of driving squares
- JIS B 4003:1999
- ソスHソスソスpソスeソス[ソスpソスVソスソスソスソスソスNソスソスソスyソスムソソスPソスbソスgソス@ソス\ソス@ソス`ソスソスEソスソスソス@
- Machine tools -- Self-holding tapers for tool shanks
- JIS B 4004:1966
- ソスPソス^ソスPソスOソスeソス[ソスpソスフシソスソスソスソスソスNソスソス 1/10
- Tapers tool shanks
- JIS B 4005:1998
- ソスtソスソスソスCソスXソスpソスXソスgソスソスソス[ソスgソスVソスソスソスソスソスNソスソスソス@ソス\ソス@ソス`ソスソスEソスソスソス@
- Milling cutters cylindrical shanks -- Dimensional characteristics
- JIS B 4051:1988
- ソスソスソスソスニゑソスソスソスソスフ選ソスソスWソスソス
- Recommendation of grinding wheels
- JIS B 4052:1988
- ソスソスソスRソスソスソスソスpソスニゑソスソスソスソスフ選ソスソスWソスソス
- Recommendation of wheels for free hand grinding
- JIS B 4053:1998
- ソスリ搾ソスpソスソスソスdソスソスソスHソスソズ暦ソスソスフ使ソスpソスソスソズ及ソスム呼び記ソスソスソスフ付ソスソスソスソス
- Application of hard cutting materials for machining by chip removal -- Designation of the main groups of chip removal and groups of application
- JIS B 4107:1998
- ソスソスソスdソスソスソスソスソスソスソスうソスtソスソスソスソスソスtソスソスソスCソスX
- Side milling cutters with brazed hardmetal tips
- JIS B 4114:1998
- ソスソスソスdソスソスソスソスソスソスソスうソスtソスソスソスXソスgソスソスソス[ソスgソスVソスソスソスソスソスNソスGソスソスソスhソス~ソスソス
- End mills with brazed helical hardmetal tips -- Part 1: Dimensions of end mills with parallel shank
- JIS B 4115:1998
- ソスソスソスdソスソスソスソスソスソスソス\ソスソスソスbソスhソスソスソス^ソスソスソス\ソス[
- Hardmetal slitting saws
- JIS B 4116:1998
- ソスソスソスdソスソスソスソスソスソスソス\ソスソスソスbソスhソスXソスgソスソスソス[ソスgソスVソスソスソスソスソスNソスGソスソスソスhソス~ソスソス
- Solid hardmetal end mills with parallel shank -- Dimensions
- JIS B 4117:1998
- ソスソスソスdソスソスソスソスソスソスソス\ソスソスソスbソスhソスXソスgソスソスソス[ソスgソスVソスソスソスソスソスNソスXソス^ソスuソスhソスソスソスソス
- Hardmetal parallel shank stub drills
- JIS B 4118:2005
- ソスソスソスdソスソスソスソスソスソスソス\ソスソスソスbソスhソスXソスgソスソスソス[ソスgソスVソスソスソスソスソスNソス{ソス[ソスソスソスGソスソスソスhソス~ソスソスソス|ソス`ソスソスEソスソスソス@
- Solid hardmetal ball-nosed end mills with cylindrical shank -- Dimensions
- JIS B 4120:1998
- ソスXソスソスソス[ソスAソスEソスFソスCソス`ソスbソスvソスフ呼び記ソスソスソスフ付ソスソスソスソス
- Indexable inserts for cutting tools -- Designation
- JIS B 4121:1998
- ソスXソスソスソス[ソスAソスEソスFソスCソス`ソスbソスv
- Indexable hard material inserts
- JIS B 4125:1998
- ソスXソスソスソス[ソスAソスEソスFソスCソス`ソスbソスvソスpソスzソスソスソス_ソス@ソス\ソス@ソスpソスVソスソスソスソスソスNソスyソスムカソス[ソスgソスソスソスbソスWソスフ呼び記ソスソスソスフ付ソスソスソスソス
- Tool holders and cartridges for indexable inserts -- Designation
- JIS B 4126:1998
- ソスXソスソスソス[ソスAソスEソスFソスCソス`ソスbソスvソスpソスzソスソスソス_ソス@ソス\ソス@ソスpソスVソスソスソスソスソスNソスフ形ソスソスEソスソスソス@
- Single-point tool holders for turning and copying, for indexable inserts -- Dimensions
- JIS B 4127:1998
- ソスXソスソスソス[ソスAソスEソスFソスCソス`ソスbソスvソスpソスJソス[ソスgソスソスソスbソスWソス@ソス\ソス@ソス`ソス^ソスCソスvソスフ形ソスソスEソスソスソス@
- Cartridges, type A, for indexable inserts -- Dimensions
- JIS B 4128:1998
- ソスXソスソスソス[ソスAソスEソスFソスCソス`ソスbソスvソスpソスzソスソスソス_ソス@ソス\ソス@ソスロシソスソスソスソスソスNソスフ呼び記ソスソスソスフ付ソスソスソスソス
- Boring bars (tool holders with cylindrical shank) for indexable inserts -- Designation
- JIS B 4129:1998
- ソスXソスソスソス[ソスAソスEソスFソスCソス`ソスbソスvソスpソスzソスソスソス_ソス@ソス\ソス@ソスロシソスソスソスソスソスNソスフ形ソスソスEソスソスソス@
- Boring bars for indexable inserts -- Dimensions
- JIS B 4130:1998
- ソス_ソスCソスソスソスソスソスソスソスhソス^ソスbソスaソスmソスHソスソス@ソス\ソス@ソス_ソスCソスソスソスソスソスソスソスhソスソスソスヘCソスaソスmソスニ(ソスuソスjソスソスソスフ暦ソスソスx
- Diamond/CBN products -- Grain sizes of diamond or cubic boron nitride
- JIS B 4131:1998
- ソス_ソスCソスソスソスソスソスソスソスhソス^ソスbソスaソスmソスHソスソス@ソス\ソス@ソス_ソスCソスソスソスソスソスソスソスhソスソスソスヘCソスaソスmソスzソスCソス[ソスソス
- Diamond/CBN products -- Diamond or CBN grinding wheels
- JIS B 4134:1994
- ソス_ソスCソスソスソスソスソスソスソスhソスPソスホドソスソスソスbソスT
- Single point diamond dressing tools
- JIS B 4138:1998
- ソス_ソスCソスソスソスソスソスソスソスhソス^ソスbソスaソスmソスHソスソス@ソス\ソス@ソス_ソスCソスソスソスソスソスソスソスhソスソスソスヘCソスaソスmソスZソスOソスソスソスソスソスgソス\ソス[
- Diamond/CBN products -- Diamond or CBN segmented saws
- JIS B 4140:1997
- ソス_ソスCソスソスソスソスソスソスソスhソスyソスムCソスaソスmソスdソスソスソスHソスソス
- Diamond or cubic boron nitride electroplated tools
- JIS B 4141:1998
- ソス_ソスCソスソスソスソスソスソスソスhソス^ソスbソスaソスmソスHソスソス@ソス\ソス@ソス_ソスCソスソスソスソスソスソスソスhソスソスソスヘCソスaソスmソスzソスCソス[ソスソスソスyソスムセソスOソスソスソスソスソスgソス\ソス[ソス@ソス\ソス@ソスソスソス@ソスLソスソスソスyソスム形ソスソスLソスソス
- Diamond/CBN products -- Diamond or CBN grinding wheels and saws -- Dimensional characteristics and code for the forms
- JIS B 4142:2002
- ソス_ソスCソスソスソスソスソスソスソスhソス^ソスbソスaソスmソスHソスソス@ソス\ソス@ソスソスソスSソスソスソスvソスソスソスソスソスソス
- Diamond/CBN products -- Safety requirements
- JIS B 4151:1998
- ソスソスソスソスソスoソスCソスg
- Ground high speed steel tool bits
- JIS B 4152:1988
- ソスソスソスソスソスxソス|ソスtソスnソスoソスCソスg
- High speed steel tipped tools
- JIS B 4201:1998
- ソスtソスソスソスCソスXソスソスソスyソスソスソスtソスソスソスCソスXソスAソス[ソスoソスソス
- Milling cutters -- Interchangeability dimensions for cutter arbors or cutter mandrels
- JIS B 4204:1998
- ソス~ソスソスソスtソスソスソスCソスX
- Milling cutters -- Cylindrical milling cutters
- JIS B 4210:1997
- ソスeソス[ソスpソスnソスGソスソスソスhソス~ソスソス
- Tapered end mills
- JIS B 4211:1998
- ソスXソスgソスソスソス[ソスgソスnソスGソスソスソスhソス~ソスソス
- End mills with parallel peripheral cutting edges
- JIS B 4213:1996
- ソスXソスgソスソスソス[ソスgソスVソスソスソスソスソスNソスソス`ソスソスソスソスソスiソスGソスソスソスhソス~ソスソス
- Tapered end mills for trapeziform runner with parallel shanks
- JIS B 4214:1998
- ソスVソスFソスソスソスGソスソスソスhソス~ソスソス
- Milling cutters -- Shell end mills with plain bore and tenon drive
- JIS B 4216:1998
- ソスJソスbソス^ソスAソス[ソスoソス@ソス\ソス@ソス`ソスソスEソスソスソス@
- Cutter arbors -- Dimensions
- JIS B 4217:1998
- ソスsソスaソスtソスソスソスCソスX
- Milling cutters -- T-slot cutters
- JIS B 4219:1999
- ソスソスソス^ソスソスソス\ソス[
- Milling cutters -- Metal slitting saws
- JIS B 4220:1988
- ソスソスソスソスソスソスソスtソスソスソスCソスX
- Screw slotting cutters
- JIS B 4221:1998
- ソスpソスxソスtソスソスソスCソスX
- Milling cutters -- Angle milling cutters
- JIS B 4226:1999
- ソスソスソス`ソスtソスソスソスCソスX
- Milling cutters -- Form milling cutters with constant profile
- JIS B 4230:1999
- ソスソスソスソスソスLソス[ソスaソスtソスソスソスCソスX
- Milling cutters -- Woodruff keyseat cutters
- JIS B 4231-1:1999
- ソスハ趣ソスソスソスtソスソスソスCソスXソス@ソスソスPソスソスソスFソスXソスgソスソスソス[ソスgソスVソスソスソスソスソスNソスハ趣ソスソスソスtソスソスソスCソスX
- Milling cutters -- Parallel shank countersinks
- JIS B 4231-2:1999
- ソスハ趣ソスソスソスtソスソスソスCソスXソス@ソスソスQソスソスソスFソスeソス[ソスpソスVソスソスソスソスソスNソスハ趣ソスソスソスtソスソスソスCソスX
- Milling cutters -- Morse taper shank countersinks
- JIS B 4232:1996
- ソスCソスソスソス{ソスソスソスソスソス[ソスgソスtソスソスソスCソスX
- Involute gear milling cutters
- JIS B 4236:1998
- ソスZソスpソスソスソスtソスソスソス{ソスソスソスgソスpソスソスソスソスソスtソスソスソスCソスX
- Milling cutters -- Counterbores for hexagon socket head bolts
- JIS B 4237:1987
- ソスuソスソスソス[ソス`ソスフつゑソスソスン包ソスソスフ形ソスソスEソスソスソス@
- Dimensions of pull and follower ends of broach
- JIS B 4238:1999
- ソスLソス[ソスaソスuソスソスソス[ソス`
- Keyway broaches
- JIS B 4239:1999
- ソスCソスソスソス{ソスソスソスソスソス[ソスgソスXソスvソスソスソスCソスソスソスuソスソスソス[ソス`
- Involute spline broaches
- JIS B 4254:1999
- ソスソスソスソスソスpソスCソスソスソスbソスgソスtソスソスソスeソス[ソスpソスVソスソスソスソスソスNソスXソスOソスソスソスソスソスソスソスtソスソスソスCソスX
- Milling cutters -- Countersinks, 90 degree SIGN, with Morse taper shanks and detachable pilots
- JIS B 4255:1999
- ソスpソスCソスソスソスbソスgソスtソスソスソスXソスgソスソスソス[ソスgソスVソスソスソスソスソスNソスXソスOソスソスソスソスソスソスソスtソスソスソスCソスX
- Milling cutters -- Countersinks, 90 degree SIGN, with parallel shanks and solid pilots
- JIS B 4256:1999
- ソスpソスCソスソスソスbソスgソスtソスソスソスXソスgソスソスソス[ソスgソスVソスソスソスソスソスNソスソスソスソスソスソスソスtソスソスソスCソスX
- Milling cutters -- Counterbores with parallel shanks and solid pilots
- JIS B 4257:1999
- ソスソスソスソスソスpソスCソスソスソスbソスgソスtソスソスソスeソス[ソスpソスVソスソスソスソスソスNソスソスソスソスソスソスソスtソスソスソスCソスX
- Milling cutters -- Counterbores with Morse taper shanks and detachable pilots
- JIS B 4258:1999
- ソスソスソスソスソスソスソスtソスソスソスCソスXソスyソスム9ソスOソスソスソスソスソス゚フソスソスソスCソスXソスpソスソスソスソスソスpソスCソスソスソスbソスgソス@ソス\ソス@ソス`ソスソスEソスソスソス@
- Detachable pilots for use with counterbores and 90 degree SIGN countersinks -- Dimensions
- JIS B 4301:1999
- ソスXソスgソスソスソス[ソスgソスVソスソスソスソスソスNソスhソスソスソスソス
- Jobber series parallel shank twist drills
- JIS B 4302:1999
- ソスソスソス[ソスソスソスXソスeソス[ソスpソスVソスソスソスソスソスNソスhソスソスソスソス
- Morse taper shank twist drills
- JIS B 4304:2005
- ソスZソスソスソス^ソスソスソスhソスソスソスソス
- Centre drills for centre holes
- JIS B 4305:2002
- ソスXソスgソスソスソス[ソスgソスVソスソスソスソスソスNソスソスソスソスソスOソスhソスソスソスソス
- Extra-long parallel shank twist drills
- JIS B 4306:2002
- ソスソスソス[ソスソスソスXソスeソス[ソスpソスVソスソスソスソスソスNソスソスソスソスソスOソスhソスソスソスソス
- Extra-long Morse taper shank twist drills
- JIS B 4307:1999
- ソスXソスgソスソスソス[ソスgソスVソスソスソスソスソスNソスXソス^ソスuソスhソスソスソスソス
- Stub series parallel shank twist drills
- JIS B 4308:1999
- ソスXソス^ソス[ソスeソスBソスソスソスOソスhソスソスソスソス
- Spot drills
- JIS B 4313:2002
- ソスソスソスソスソスxソスHソスソス|ソスhソスソスソスソスソス@ソス\ソス@ソスZソスpソスdソスl
- High-speed steel two-flute twist drills -- Technical specifications
- JIS B 4314:2002
- ソス~ソス[ソスソスソスソスソスOソスVソスソスソスソスソスNソスhソスソスソスソスソスフ形ソスソスEソスソスソス@
- Twist drills with milling cutters cylindrical shank -- Dimensions
- JIS B 4350:2002
- ソスソスソスリ工ソスソス@ソス\ソス@ソスソスソス`ソスyソスム撰ソスソス@
- Gear cutter -- Tooth profiles and dimensions
- JIS B 4351:1985
- ソスソスソスソスソスホ傘ソスソスソスヤ用ソスfソス`ソスnソスソス
- Straight bevel gear generating cutters (type G)
- JIS B 4354:1998
- ソスソスソスヤ用ソスzソスuソス@ソス\ソス@ソスソスPソスソスソスFソズゑソスソスzソスuソスフ形ソス寸法
- Gear hobs -- Part 1: Dimensions of solid hobs
- JIS B 4355:1998
- ソスソスソスヤ用ソスzソスuソス@ソス\ソス@ソスソスQソスソスソスFソスソスソスヤ用ソスzソスuソスフ撰ソスソスx
- Gear hobs -- Part 2: Accuracy requirements
- JIS B 4356:1996
- ソスsソスjソスIソスソスソスJソスbソス^
- Pinion type cutters
- JIS B 4357:2000
- ソスロ形ソスVソスFソス[ソスrソスソスソスOソスJソスbソス^
- Rotary gear shaving cutters
- JIS B 4401:1998
- ソスソスソス[ソスソスソスXソスeソス[ソスpソスyソスムソスソスgソスソスソスbソスNソスeソス[ソスpソスpソスソスソス[ソス}
- Reamers -- Reamers for morse and metric tapers, with parallel shanks and morse taper shanks
- JIS B 4402:1998
- ソス`ソスソスソスbソスLソスソスソスOソスソスソス[ソス}
- Reamers -- Machine chucking reamers with parallel shanks or Morse taper shanks
- JIS B 4405:1998
- ソスnソスソスソスhソスソスソス[ソス}
- Reamers -- Hand reamers
- JIS B 4406:1999
- ソスVソスFソスソスソスソスソス[ソス}
- Reamers -- Shell reamers
- JIS B 4407:1998
- ソスVソスFソスソスソスソスソス[ソス}ソスpソスAソス[ソスo
- Arbors for shell reamers
- JIS B 4409:1998
- ソスeソス[ソスpソスVソスソスソスソスソスNソスuソスソスソスbソスWソスソスソス[ソス}
- Reamers -- Machine bridge reamers
- JIS B 4410:1998
- ソスeソス[ソスpソスsソスソスソスソスソス[ソス}
- Reamers -- Taper pin reamers
- JIS B 4413:1998
- ソス}ソスVソスソスソスソスソス[ソス}
- Reamers -- Machine reamers
- JIS B 4414:1998
- ソスソスソス[ソス}ソスフ撰ソスソス@ソスソスソスソスソスフ鯉ソスソス゚包ソス
- Reamers -- Special tolerances for reamers
- JIS B 4430:1998
- ソスソスソス[ソスgソスソスソスヒゑソスソスpソスnソスソスソスhソス^ソスbソスv
- Short machine taps and hand taps for metric threads
- JIS B 4432:1999
- ソスソスソスjソスtソス@ソスCソスヒゑソスソスpソスnソスソスソスhソス^ソスbソスv
- Short machine taps and hand taps for unified threads
- JIS B 4433:1990
- ソスiソスbソスgソス^ソスbソスv
- Nut taps
- JIS B 4445:1998
- ソスヌ用ソスソスソスsソスヒゑソスソスpソス^ソスbソスv
- Hand taps for parallel pipe threads
- JIS B 4446:1998
- ソスヌ用ソスeソス[ソスpソスヒゑソスソスpソス^ソスbソスv
- Hand taps for taper pipe threads
- JIS B 4451:1999
- ソスヒゑソスソスリゑソスロダソスCソスX
- Hand-and machine-operated circular screwing dies
- JIS B 4455:1998
- ソスヌ用ソスソスソスsソスヒゑソスソスpソスヒゑソスソスリゑソスロダソスCソスX
- Hand-and machine-operated circular screwing dies for parallel pipe threads
- JIS B 4456:1998
- ソスヌ用ソスeソス[ソスpソスヒゑソスソスpソスヒゑソスソスリゑソスロダソスCソスX
- Hand-and machine-operated circular screwing dies for taper pipe threads
- JIS B 4501:1996
- ソスヒゑソスソス]ソスソスソスロダソスCソスX
- Thread rolling cylindrical dies
- JIS B 4502:1996
- ソスヒゑソスソス]ソスソスソスソスソス_ソスCソスX
- Thread rolling flat dies
- JIS B 4604:1998
- ソスソスソスソスソスLソスソスソスソスソス`
- Adjustable angle wrenches
- JIS B 4606:1995
- ソスpソスCソスvソスソスソスソスソス`
- Pipe wrenches
- JIS B 4609:1998
- ソスヒゑソスソスし ソス\ソス@ソスソスソスソスソスソスtソスソスソスヒゑソスソスp
- Screwdrivers for slotted-head screws
- JIS B 4614:1995
- ソスRソスソスソスrソスlソス[ソスVソスソスソスソスソスvソスソスソスCソスソス
- Slip joint combination pliers with cutters
- JIS B 4620:1995
- ソスソスソスソスソスヘ(ソスpソスソスソス`ソスj
- Parallel bench vices (Square jaw type)
- JIS B 4621:1995
- ソスソスソスソスソスヘ(ソスロ難ソスソス`ソスj
- ソスソス
- JIS B 4623:1998
- ソスyソスソスソス`
- Cutting pliers
- JIS B 4624:1998
- ソスロペソスソスソス`
- Round nose pliers
- JIS B 4625:1995
- ソスホめニソスbソスp
- Slant edge cutting nippers
- JIS B 4626:1995
- ソスEソスHソス[ソス^ソス|ソスソスソスvソスvソスソスソスCソスソス
- Water pump pliers
- JIS B 4627:1994
- ソスnソスソスソスhソスソスソスxソスbソス^
- Hand riveter
- JIS B 4630:1998
- ソスXソスpソスi
- Open ended spanners
- JIS B 4631:1998
- ソスソスソスWソスIソスyソスソスソス`
- Round nose chain pliers with side cutters
- JIS B 4632:1998
- ソス゚ゑソスソスヒソスソスソスソス`
- Offset wrenches
- JIS B 4633:1998
- ソス\ソスソスソスヒゑソスソスソス
- Screwdrivers for cross recessed head screws
- JIS B 4634:1998
- ソスhソスソスソスソスソス`ソスソスソスbソスN
- Drill chuck
- JIS B 4635:2002
- ソスソスソスヘニソスbソスp
- Heavy duty cutting nippers
- JIS B 4636-1:1998
- ソス\ソスPソスbソスgソスソスソスソスソス`ソス@ソス\ソス@ソスPソスQソスDソスVソスpソスhソスソスソスCソスu
- Socket wrenches -- 12.7 mm square drive
- JIS B 4636-2:1998
- ソス\ソスPソスbソスgソスソスソスソスソス`ソス@ソス\ソス@ソスUソスDソスRソス`ソスQソスTソスpソスhソスソスソスCソスu
- Socket wrenches -- 6.3 to 25 square drive
- JIS B 4643:1995
- ソス{ソスソスソスgソスNソスソスソスbソスp
- Bolt clippers
- JIS B 4648:1994
- ソスZソスpソス_ソスXソスpソスi
- Hexagon socket screw keys
- JIS B 4650:2002
- ソス闢ョソスソスソスgソスソスソスNソスソスソスソスソス`
- Torque wrenches
- JIS B 4651:1998
- ソスRソスソスソスrソスlソス[ソスVソスソスソスソスソスXソスpソスi
- Combination wrenches
- JIS B 4703:1966
- ソスSソスHソス竄キソスソス
- Files
- JIS B 4704:1964
- ソスgソス竄キソスソス
- Set files
- JIS B 4705:1966
- ソスnソス竄キソスソス Saw files
- ソスnソス竄キソスソス Saw files
- JIS B 4706:1966
- ソスソスソズのゑソスソス竄キソスソス
- Mill saw files
- JIS B 4707:1992
- ソスソスソスfソスル機ソス@ソス\ソス@ソスソスソスfソスル包丁
- Paper cutting machine -- Paper cutting knives
- JIS B 4708:1997
- ソスxソスjソスソスソスソスソス[ソスXソスiソスCソスt
- Veneer lathe knives
- JIS B 4709:1997
- ソスリ工ソス@ソスBソスpソスソスソスソスソスソスネ刃
- Planer knives for woodworking machines
- JIS B 4710:1997
- ソスリ工ソスpソスcソスンゑソスソスJソスbソス^
- Groove cutters for woodworking machines
- JIS B 4711:1991
- ソスリ工ソス@ソスBソスpソスソス]ソスソスソスソスネ難ソス
- Cutter blocks for wood planing
- JIS B 4751-1:1999
- ソスnソスNソス\ソス[ソス@ソスソスPソスソスソスFソスnソスソスソスhソスnソスNソス\ソス[ソスフ撰ソスソス@
- Hacksaw blades -- Part 1: Dimensions for hand blades
- JIS B 4751-2:1999
- ソスnソスNソス\ソス[ソス@ソスソスQソスソスソスFソス}ソスVソスソスソスnソスNソス\ソス[ソスフ撰ソスソス@
- Hacksaw blades -- Part 2: Dimensions for machine blades
- JIS B 4802:1998
- ソスリ工ソスpソスロのゑソス
- Circular saw blades for woodworking
- JIS B 4803:1998
- ソスリ工ソスpソスムのゑソス
- Bandsaw blades for woodworking
- JIS B 4805:1989
- ソスソスソスdソスロのゑソス
- Circular saws with cemented carbide tips
- JIS B 4900:1986
- ソス闔晢ソスソスソスヘ工ソスソスフ工ソスソスUソスソスソスソスソスxソスソスソスソスソスソスソスソス@
- Method of measurement and description of hand-transmitted vibration level
- JIS B 5003:2003
- ソスvソスソスソスXソス^ソスpソスVソスソスソスソスソスN
- Punch holder shanks for press dies
- JIS B 5007:1998
- ソスvソスソスソスXソス^ソスpソスKソスCソスhソス|ソスXソスgソスyソスムガソスCソスhソスuソスVソスソス
- Tools for pressing -- Guide posts and guide bushes
- JIS B 5009:1998
- ソスvソスソスソスXソス^ソスpソスツば付ソスソスソスpソスソスソス`
- Tools for pressing -- Punches with cylindrical head and reduced shank
- JIS B 5012:1998
- ソスvソスソスソスXソス^ソスpソスRソスCソスソスソスホゑソス
- Tools for pressing -- Coiled helical spring
- JIS B 5031:2003
- ソスvソスソスソスXソス^ソスpソス_ソスCソスZソスbソスgソス@ソス\ソス@ソスソスソスxソスyソスム托ソスソスソスソスソス@
- Die sets for press dies -- Accuracy and measuring method
- JIS B 5060:2000
- ソスvソスソスソスXソス^ソスpソス_ソスCソスZソスbソスg
- Die sets for press dies
- JIS B 5061:2003
- ソスvソスソスソスXソス^ソスpソスソスソスツ包ソスソスi
- Machined plates for press dies
- JIS B 5062:2000
- ソスソスソス^ソスpソス_ソスEソスGソスソスソスsソスソス
- Dowel pins for dies and moulds
- JIS B 5063:2003
- ソスvソスソスソスXソス^ソスpソス_ソスCソスuソスVソスソス
- Die bushing for press dies
- JIS B 5064:1986
- ソスvソスソスソスXソス^ソスpソスXソスgソスソスソスbソスpソス{ソスソスソスg
- Shoulder screws for stamping dies
- JIS B 5101:2003
- ソスソスソス[ソスソスソスhソスpソスソスソスツ包ソスソスi
- Machined plates for moulds
- JIS B 5102:2000
- ソスソスソス[ソスソスソスhソスpソスKソスCソスhソスsソスソス
- Guide pins for moulds
- JIS B 5103:2003
- ソスソスソス[ソスソスソスhソスpソスGソスWソスFソスNソス^ソスsソスソス
- Ejector pins for moulds
- JIS B 5104:2000
- ソスソスソス[ソスソスソスhソスpソスソスソス^ソス[ソスソスソスsソスソス
- Return pins for moulds
- JIS B 5105:2000
- ソスソスソス[ソスソスソスhソスpソスKソスCソスhソスuソスVソスソス
- Guide bushes for moulds
- JIS B 5111:2000
- ソスvソスソスソスXソス`ソスbソスNソスpソスソスソス^ソスフソスソスPソス[ソスgソスソスソスソスソスO
- Locating rings of moulds for plastics
- JIS B 5112:2003
- ソスソスソス[ソスソスソスhソスpソスXソスvソスソスソス[ソスuソスVソスソス
- Sprue bushes for moulds
- JIS B 5114:2003
- ソスソスソス[ソスソスソスhソスpソスiソスtソスソスソスGソスWソスFソスNソス^ソスsソスソス
- Shouldered ejector pins for moulds
- JIS B 5115:2000
- ソスvソスソスソスXソス`ソスbソスNソスpソスソスソス^ソスフエソスWソスFソスNソス^ソスKソスCソスhソスsソスソス
- Ejector guide pins of moulds for plastics
- JIS B 5116:2003
- ソスソスソス[ソスソスソスhソスpソスTソス|ソス[ソスgソスsソスソス
- Support pillars for moulds
- JIS B 5117:2003
- ソスソスソス[ソスソスソスhソスpソスGソスWソスFソスNソス^ソスXソスソスソス[ソスu
- Ejector sleeves for moulds
- JIS B 5118:2000
- ソスvソスソスソスXソス`ソスbソスNソスpソスソスソス^ソスフエソスWソスFソスNソス^ソスKソスCソスhソスuソスVソスソス
- Ejector guide bushes of moulds for plastics
- JIS B 5119:2003
- ソスソスソス[ソスソスソスhソスpソスハ置ソスソスソス゚包ソスソスi
- Round locating elements and spacers for moulds
- JIS B 5120:1997
- ソスvソスソスソスXソス`ソスbソスNソスソスソス^ソスpソスfソスBソスXソスNソスXソスyソス[ソスT
- Parts for injection moulds -- Disc spacers
- JIS B 5121:2003
- ソスソスソス[ソスソスソスhソスpソスiソスtソスソスソスソスソスGソスWソスFソスNソス^ソスsソスソス
- Flat ejector pins for moulds Jig bushes and accessories
- JIS B 5201:1998
- ソスWソスOソスpソスuソスVソスソスソスyソスムゑソスソスフ包ソスソスソスソスi
- Jig bushes and accessories
|
|
ソスソスソスTソスCソスgソスソスソスノゑソスソスソスソスソスAソスSソストの包ソスソスヘ及ソスム画像ソスソスソスtソス@ソスCソスソスソスフ抵ソスソス権ソスヘ、ソスLソスソスソスソスソス ソスソスソスソスZソスソスソスノゑソスソスソスワゑソスソスB |
ソスソスソスfソス]ソスレ、ソスソスソスfソスgソスpソスソスソスヨゑソスソスワゑソスソスiソスソスソスソスソスNソスヘフソスソスソス[ソスナゑソスソスjソスB
|
|
Copyright(C)2025 Nagai Giken Co.,Ltd. All Rights Reserved. |
|