MongoDb 3.2.12 for Orange Pi precompiled binaries for 32 bit armv7l.
WARNING
This 32-bit legacy distribution does not include SSL encryption and is limited to around 2GB of data. In general you should use the 64 bit builds.
Create mongodb user and folders needed
sudo adduser --ingroup nogroup --shell /etc/false --disabled-password --gecos "" \
--no-create-home mongodb
sudo mkdir /var/log/mongodb
sudo chown mongodb:nogroup /var/log/mongodb
sudo mkdir /var/lib/mongodb
sudo chown mongodb:root /var/lib/mongodb
sudo chmod 775 /var/lib/mongodbClone this repo and copy binaries files, configuration and service
git clone https://github.com/robertsLando/MongoDB-OrangePI.git
cd MongoDB-OrangePI
sudo cp mongodb.conf /etc
sudo cp mongodb.service /lib/systemd/system
cd bin
sudo chown root:root mongo*
sudo chmod 755 mongo*
sudo cp -p mongo* /usr/bin
sudo systemctl start mongodb
sudo systemctl status mongodbEnable mongodb on startup
sudo systemctl enable mongodb
Sometimes mongo could need recovery, run this commands to recover the db
sudo -u mongodb mongod --repair --dbpath /var/lib/mongodb/
sudo service mongodb restart#Download mongo
mkdir install
cd install
wget https://fastdl.mongodb.org/src/mongodb-src-r3.2.12.tar.gz
tar xvf mongodb-src-r3.2.12.tar.gz
cd mongodb-src-r3.2.12
##Install required package for compiling
sudo aptitude install scons build-essential
sudo aptitude install libboost-filesystem-dev libboost-program-options-dev libboost-system-dev libboost-thread-dev
sudo aptitude install python-pymongo
#Increese swap space
sudo dd if=/dev/zero of=/mytempswapfile bs=1024 count=524288
sudo chmod 0600 /mytempswapfile
sudo mkswap /mytempswapfile
sudo swapon /mytempswapfile
#Generate additional sources
cd src/third_party/mozjs-38/
./get_sources.sh
./gen-config.sh arm linux
cd -
#Start compiling
scons mongo mongod -j4 --disable-warnings-as-errors --wiredtiger=off --mmapv1=on --warn=no-all
#Strip binaries files to reduce space usage
cd build/opt/mongo
sudo strip mongo*
##Reboot system and remove swap file
sudo reboot
sudo rm -rf /mytempswapfileYou will find your compiled binaries on build/opt/mongo. Now you can copy your binaries in the usr/bin and create the mongodb conf and service file by following Install section
Thanks to:
- Mongo binaries configuration and service: https://andyfelong.com/2016/01/mongodb-3-0-9-binaries-for-raspberry-pi-2-jessie/
- Mongo binaries compile: http://koenaerts.ca/compile-and-install-mongodb-on-raspberry-pi/
