== Version 0.5.1

V0.5.1 adds support for Ruby 1.8.7, Ruby 1.9.3, JRuby 1.6.7,

RSpec 2.9, and Webgen (0.5.14 - for the build process).

WARNING: Earlier versions of Ruby 1.8, 1.9 and JRuby 1.X are not

supported. JRuby support is limited to "pure" Ruby code; the main

RSpec specifications pass under JRuby, but not the JRuby-specific

specifications in jruby/spec. Restoring full JRuby support is planned,

but the timeframe is TBD.

It also has some minor API changes summarized below.

Enhancements:

22558 Support Ruby 1.9.1 (actually 1.9.3)

27235 Support RSpec 1.2.8 (actually 2.9) and and JRuby 1.3.1 (actually 1.6.7)

27236 Upgrade website generation to webgen 0.5.X (X=14)

The actual versions of these tools supported are more recent versions

shown in parentheses.

There are no API changes in this release, with two exceptions.

First, Most of the code changes are minor fixes to RSpec files. The one

exception is an apparent change that occurred in JRuby 1.3.X with respect

to the access restrictions on Java methods. It now appears that protected

methods are public, that is they are in the method list returned by

:public_methods, but not :protected_methods. Also, private methods are

not returned by any of the :*_methods.

Second, there was a deprecated option to the MethodFinder class,

:options, that has been removed. Use :method_options instead.

I used the upgrade to Webgen 0.5.X as an excuse to refresh the web site's

appearance. The content is mostly the same as before.

== Version 0.4.3

V0.4.3 adds a few bug fixes and enhancements, and several internal

refactorings to improve performance, etc.

Bug fixes:

[none]

Enhancements:

14165 Support Ruby 1.8.2, 1.8.5, 1.8.6, 1.9.X and 2.0 releases and snapshots

21283 Allow "_of" suffix at end of "*_and_descendents", "*_and_ancestors",

and "*_nested_types"

21924 Should be able to turn off contract-testing aspects globally in the

Design by Contract extra module

21993 By default, don't advise "system" methods that being with "_", but

provide an option to do so

Details:

14165: I closed this one because it's too broad. Aquarium currently runs with

1.8.6. I will open a new enhancement specifically for 1.9.

21283: Sometimes appending "_of" makes the specification read more smoothly,

so it's now an option.

21924: To class-level methods in DesignByContract, enable_all and disable_all,

globally turn contracts on or off. See their documentation for details.

21993: Now, by default, MethodFinder won't match any method that starts with

two underscores ("__"), so you don't have to :exclude_ancestors as much just

to avoid matching methods like "__id__" and "__send__". There is also a new

:method_options called :include_system_methods that will not suppress

matching these methods. So, I'm calling these special methods "system

methods". I don't yet provide a way to configure this list (RSpec methods

would be good additions...). The list is currently defined as an array of

regex's, MethodFinder::IGNORED_SYSTEM_METHODS. NOTE: This is effectively a

behavior change, although it's not likely to affect anyone.

== Version 0.4.2

V0.4.2 adds a few bug fixes and enhancements, greatly improved RDoc output,

and internal refactorings to improve performance.

Bug fixes:

15202 Intermittent confusion between classes and objects when invoking advice

19262 Just putting join_point argument in advice block causes mysterious

method missing error.

19321 Advice overhead is too high (ongoing improvements)

Enhancements:

13403 Support recursion into nested types without requiring "tricky" regular

expressions

13406 "Sugar" for adding methods and attributes to types

18537 Provide a search for all pointcut constants

19666 Improve the RDoc output

19119 Provide an "after_raising" type of advice that lets you handle the

exception.

#15202: I never figured out the cause of this problem, but it hasn't been seen

since late last

year, so I suspect it disappeared as a side effect of on-going refactoring and

enhancements.

#19262: If you just specified "|jp|" for an advice block, you would sometimes

get a method missing error. I never figured out exactly why, but it was

somehow related to passing the usual three arguments internally, where the

last two would be ignored in this case. Now, the code checks the arity and

only passes the join point in this case.

#19321: I removed some of the wasted object creation and initialization in

advice invocation,

improving the overhead by about 40%. However, it is still at least 10x higher

than simple method aliasing, so I want to make more improvements. (I did not

close this item.)

#13403: I added new options :types_and_nested_types and :types_and_nested that

are analogous to the similar "ancestors" and "descendents" options. The

nested option will return the specified types and any types they "enclose".

There are also corresponding "exclude" options.

#13406: I've decided not to do this, as it really isn't the "simplest thing

that could possibly work." It's easy enough for the user to define a module

of new behavior and just use "obj.extend(module)". However, when the user

needs to do this over a set of types, Aquarium's TypeFinder can be helpful,

so I added an example to the Examples code and page.

#18537: I've provided an example of the design approach where you define

pointcuts in a class, as a kind of "aspect interface" and write aspects that

specify those pointcuts. The problem has been that you had to name every

single such pointcut explicitly. There was no "finder" option, as for types,

methods, etc. Now there is a pointcut finder option with a new option

":named_pointcuts" for Aspect.new to specify a search for pointcuts in a set

of types matching a name specification. Either constants or class variables

will be matched (or both).

#19666: The rdoc for the key classes was cleaned up so it "renders" better.

Feedback is welcome.

#19119: I finished the previously-incomplete support for allowing advice to

change the raised exception, in both after and after_raising advice. A

common scenario is to wrap the thrown exception in another. For example, a

low-level, service-specific exception (like a database error) in a

higher-level, more generic application exception.

You still can't rescue the exception completely in :after_raising and :after

advice; the value for the exception in

joinpoint.context.raised_exception

when the advice returns will be raised by Aquarium. I think that permitting

:after_raising or :after advice to "eat" the exception could cause subtle

issues with scope and variable binding. It would also probably violate the

"principle of least surprise"; the advice code that rescues the exception would

not be as "obvious" to the reader as the familiar idiom of rescue clauses

that we are accustomed to using. Therefore, if you want to recover completely

from an exception, use rescue clauses in around advice.

== Version 0.4.1

V0.4.1 adds a few bug fixes, a few more user examples, internal refactoring and

some performance improvements.

Bug fixes:

19116 When an exception is thrown during advice execution, the error message

always reports the advice type is :before!

19261 after_raising DSL method provides no way to specify exceptions

Enhancements:

18705 Remove duplication and complexity in options-handling code

19320 Move the Aquarium::...::AspectDSL file to Aquarium::DSL for convenience

19399 Improve the Design by Contract example

I added a new :exceptions argument (synonym :exception) that takes a single

exception or list thereof. You can only use this argument with :after_raising.

If you specify exceptions with the latter and use the :exceptions argument,

the values will be merged.

I thought it was ugly to have to type "include

Aquarium::Aspects::DSL::AspectDSL", so I moved the code so now it's "include

Aquarium::DSL". However, for backwards compatibility, the old module still

works.

== Version 0.4.0

V0.4.0 adds specs to characterize and test advising Java classes when running

on JRuby and adds several API enhancements.

Bug fixes:

17844 JRuby - Advising types, Aquarium thinks the type is a string

17883 Workaround for JRUBY-2089

18090 JoinPoint#invoke_original_join_point only works with :around advice

Enhancements:

17834 Allow :class and :module (and variants) wherever :type is allowed

17881 Add specs that exercise advising Java types and objects using JRuby

#17844 occurred because of the way JRuby encodes Java packages into modules.

Aquarium now properly handles JRuby types.

#17883 reflected a JRuby bug, so a workaround was required.

#17834 allows the user to substitute the words "class", "classes", "module" or

"modules" anywhere the words "type" and "types" are used in the API, since some

users might naturally want to write aspects like this:

around :calls_to => :my_method, :in_class => MyClass do ...; end

However, there is no enforcement to ensure that "class" is only used for

classes and "module" is only used for modules, etc. Note: it's possible we'll

enforce this in some future release, as a way of saying things like "only advise

classes that match ...", etc. Caveat Emptor!

For #18090, a bug prevented JoinPoint#invoke_original_join_point (which allows

you to bypass all advices at the join point) from working except for :around

advice (and yes, the specs didn't cover this adequately - gasp!). Now fixed.

For #17881, I created a separate set of specs for JRuby, so it's easier to run

the "regular" Aquarium specs using MRI and the JRuby-specific specs separately

with JRuby. The new "jruby" directory contains a Rakefile, another set of specs,

and Java example code for the specs to use. The default Rakefile task re-runs

the main Aquarium spec suite using JRuby, to confirm that the suite passes

successfully, then it runs a set of different specs that load sample Java

interfaces and classes into JRuby and then advises them with Aquarium.

I found a few JRuby bugs and other behavior differences between MRI during this

release. I was able to handle them with modifications to the Aquarium code. If

you "grep" the Aquarium "lib" and "spec" directories for the word "jruby"

(ignoring case), you'll find notes about these issues and the workarounds I

implemented.

The separate JRuby spec suite shows what you can and cannot do with Java types.

As a side benefit, it also demonstrates how Java types, objects, and methods

are mapped to Ruby. There are some important limitations, however. See the

jruby.html page on the website or the README for more details.

Note: JRuby 1.1RC2 was used.

== Version 0.3.1

V0.3.1 adds numerous performance improvements, especially in the RSpec suite,

and some minor API additions.

Bug fixes:

N.A.

Enhancements:

14447 Unify internal handling of reporting errors to the user

17514 Provide an Aquarium library-wide logger with configuration parameters and

instance overrides

17515 Add an optional warning if an aspect doesn't match any join points

17516 Remove unnecessary examples that use :types_and_descendents to shorten

time to run the RSpec suite

17565 JoinPoint.new should convert a type name, symbol, or regex to the type

and only allow one type

These first two enhancements are related. There is a now an

Aquarium::Utils::DefaultLogger module with static accessors for getting and

setting the "system-wide" logger.

When instance-level overrides are necessary, the Aquarium::Utils::OptionsUtils

provides "universal" options (but currently used only by Aspect and Pointcut)

for specifying a logger (with the new :logger parameter), or alternatively,

specifying just the output stream (:logger_stream) and/or the severity

(:severity, one of the standard library's Logger::Severity-defined constants).

If either of the latter two options is specified, a separate logger instance is

created, rather than changing parameters for the global logger.

OptionsUtils also supports a :noop parameter, which classes interpret to mean

do none (or perhaps only some) of the processing. Useful for debugging.

#17515 adds a helpful warning to the system (or aspect-instance's) logger if

an aspect matches no join points. This warning will be suppressed if (i) the

severity level for the logger is above WARN or (ii) the aspect was created

with the option :ignore_no_matching_join_points => true.

#17516 fixes halved the long execution times for the whole RSpec suite by

refactoring some examples that used type finders with the :types_and_descendents

option unnecessarily. It is a very intensive computation! Note that I stubbed

out these calls using an aspect with around advise, a useful "development-time"

aspect. See Aquarium::TypeUtilsStub (in spec_example_types.rb) and how it's used

in pointcut_spec.rb. Using this technique and other optimizations, the time to

run the suite was reduced from ~5 minutes to about 1 minute.

#17565 fixes a "hole" in JoinPoint, where it doesn't confirm that a specified

type string, symbol or regex matches a class that exists and only one class. Now

it does and it stores the type, rather than the original "specification" for it.

== Version 0.3.0

V0.3.0 adds numerous improvements to the DSL, making aspect specification more

intuitive and English-like. For example, where you previously wrote, e.g.,

around :methods => :all, :types => [Foo, Bar], :advice => advice_proc

after :attribute => name, :attribute_options => [:readers], :objects => [foo, bar] ...

Now you can write the same aspects as follows:

around :calls_to => :all_methods, :within_types => [Foo, Bar], :use_advice => advice_proc

after :reading => name, :on_objects => [foo, bar] ...

Other improvements include performance and robustness enhancements and

miscellaneous internal refactoring and DRY improvements.

Bug fixes:

16267 gem not updating

Enhancements:

17154 More intuitive synonyms for specifying types, methods and attributes

For #17154, the following changes were made:

Added :all_methods as a synonym for the :all special value.

Added :reading as a synonym for :attributes => ..., :attribute_options =>

[:readers]

Added :writing and :changing as synonyms for :attributes => ...,

:attribute_options => [:writers]

Added :accessing as a synonym for :attributes => ...

Added :calls_to, :calling, :invoking, :sending_message_to as synonyms for

:methods.

Added :on_types, :in_types, :within_types and :for_types as synonyms for :types.

The same set of prefixes is supported for :type, :objects, :object, and the

various :exclude_*, :*_and_ancestors, and :*_and_descendents.

The full list of possible synonyms are shown in the spec examples. In

particular, see "pointcut_spec.rb".

== Version 0.2.0

V0.2.0 changes the parameter list used for advice blocks and adds numerous

enhancements, robustness improvements and more complete "spec'ing".

Bug fixes:

none

Enhancements:

13402 Support a subclass syntax like AspectJ's "Type+".

13984 More flexible argument list to the advise block.

14053 Remove JoinPoint#type, JoinPoint#type=, JoinPoint#object, and

JoinPoint#object=

14061 Add a control flow mechanism to skipping (sic) intermediate advice

15164 Deprecate ObjectFinder

15413 Remove ObjectFinder

15710 Eliminate redundant public methods in various "finders"

#13402 adds new invocation options to specify types and their descendents

(subclasses or modules that include the specified module(s)) and ancestors.

The latter should be used cautiously as it will include things like Kernel,

Object, and Class! I used new command options rather than the AspectJ "+"

suffix (and the proposed, but never implemented "-" suffix for ancestors),

because the "+" would be confusing with regular expressions and not in the

spirit of trying to make the pointcut language "easy to read". So, the

following are now available:

:type_and_ancestors

:types_and_ancestors

:type_and_descendents

:types_and_descendents

And the corresponding:

:exclude_type_and_ancestors

:exclude_types_and_ancestors

:exclude_type_and_descendents

:exclude_types_and_descendents

If you want both the ancestors and descendents, just use both options with

the same value.

#13984 adds the object as the second argument to the advice block parameter

list. This change reflects the fact that the object is often needed, but

calling jp.context.advised_object is a bit tedious. THIS CHANGE BREAKS

BACKWARDS COMPATIBILITY!! An exception is raised if advice has the signature

|jp, *args|.

#14061 adds a new method, JoinPoint#invoke_original_join_point, which will

invoke the original method without intermediate advice. If called within

around advice, you can write advice that vetoes all subsequent advice, yet

invokes the original method. Use this technique cautiously, however, since you

may not always know what other advices are involved and what side effects this

control-flow change might cause.

#15164 and 15413 remove ObjectFinder because it is not used and it requires

ObjectSpace, which has high overhead and won't be enabled, by default, in

JRuby (it will be optional).

#15710 removes redundant methods that were becoming a maintenance issue, in

particular, MethodFinder#find_all_by and TypeFinder#find_by_name. This is a

non-backwards-compatible API change.

Finally, note that I have not yet been able to resolve bug #15202, "Intermittent

confusion between classes and objects when invoking advice." I believe this is a

very rare occurrence and only likely to ever happen during the "torture-test" of

running the RSpec suite. Please post a comment to Tracker if you encounter it!

== Version 0.1.8

V0.1.7 did not successfully "register" at rubyforge. This releases fixes that

problem and also adds several feature enhancements and refactorings. There are

no known upgrade issues.

Bug fixes:

none

Enhancements:

13399 Add :exclusion options for methods and types.

14707 :exclude_ancestor_methods as synonym for :suppress_ancestor_methods

13399 adds new :exclude_(pointcuts|join_points|types|objects|methods|attributes)

options for Aspect.new, and Pointcut.new that make it easier to specify a list

or regular expression for various "items" and then to exclude particular

items, e.g., Aspect.new :around, :types => /nterestingType/, :exclude_types =>

UninterestingType ...

The :exclude_ancestor_methods option is now preferred over

:suppress_ancestor_methods, since the former is more consistent with the new

:exclude_* options.

== Version 0.1.7

Bug fixes:

14946 Advice fails when instrumenting methods containing special characters

15038 Spec for pointcut example variation #1

15039 Spec for pointcut example variation #2

15085 Specifying just :attributes for aspects also matches all methods, as if

:methods => :all specified

Enhancements:

13396 Unify internal handling of types vs. objects

15038 and 15039 were bugs in one of the examples (actually in the comments).

However, experimenting with them also revealed the nasty 15085 bug!

I previously handled some special characters in method names, but not all the

possible ones, hence 14946. Aquarium should now properly handle any valid Ruby

method name.

== Version 0.1.6

Bug fixes:

14353 Advising subclass method that calls super raises exception when method

executed

14356 Regexps for types must cover the whole name, which is inconsistent with

method/attribute regexps

14384 Design by Contract "extra" does not return correct value "invar" handling

13410 Fix funky navigation bar on website

14353 was kind of bad, but it's actually a Ruby bug with a good workaround. If

you advised a method that called "super", Ruby would use the wrong method name

to lookup the class in the parent. See the bug description for the details.

For 14356, type regular expressions now match on parts of names; they don't have

to match the whole name. The exception is regular expressions with module

separators "::". In this case, it seems to make more sense for the regular

expression to be interpreted as follows: If the expression is /A::B::C::D/,

then for the the outermost types, the expression behaves as /^.*A/, for the

types between two "::", the expressions behave as /^B$/ and /^C$/, and the

trailing expression behaves as /D.*$/.

14384 was an easy mistake to make with "around" advice; you have to remember to

return the result of the "join_point.proceed" call, unless you specifically

want to change the returned value! Here are two ways to do it:

do_something_before(...)

result = join_point.proceed

do_something_after(...)

return result

or

begin

do_something_before(...)

join_point.proceed

ensure

do_something_after(...)

end

The latter approach looks "asymmetrical" and it will behave differently if

"proceed" raises! However, it eliminates the temporary, if you find that

desirable.

Enhancements:

13407 Pick a better method name for JoinPoint#type, which hides the Module#type

14385 Pointcut.new should accept a :join_point => jp argument

14386 Aspect.new ..., :pointcut => should accept a join point object

14440 Add good warning message when "proceed" used for non-around advice

For 13407, new attribute methods have been added

* JoinPoint#target_type return the type that the join_point matches.

* JoinPoint#target_type= set the type that the join_point matches.

* JoinPoint#target_object return the object that the join_point matches.

* JoinPoint#target_object= set the object that the join_point matches.

The following, older methods are now deprecated and will be removed in the 0.2.0

release (#14053):

* JoinPoint#type

* JoinPoint#type=

* JoinPoint#object

* JoinPoint#object=

JoinPoint#type method is deprecated because it hides Module#type, which returns

the type of the corresponding object. For "symmetry", the other three methods

are also now deprecated and they will be removed in a future release. Until

then, all will print a warning message to STDOUT. (If you really want the type

of what could be a JoinPoint object, you should use #class anyway, as

Module#type is also deprecated!)

== Version 0.1.5

Bug fixes:

13514 Protected and private methods are made public when advised and left that

way when unadvised

13650 Loading Aquarium interferes with Rails filters

13864 Bug with negative object_id

Enhancements:

13392 Convert examples to specs.

13463 Support running in JRuby

Fixing 13650 required an API change, which is why I've tagged this release

"0.1.5" instead of something like "0.1.1" (and the changes don't seem big enough

to warrant "0.2.0"...).

Previously, requiring "aquarium.rb" in the top-level "lib" directory would

implicitly require lib/aquarium/dsl/aspect_dsl.rb, which has Object include the

AspectDSL module. This module adds methods like :before and :after to Object.

Unfortunately, those methods collide with methods of the same name that Rails

adds to Object. It was also a bit presumptuous of me to assume that everyone

wanted those methods on Object ;)

In this release, aspect_dsl.rb is still implicitly included and it still defines

the AspectDSL module. Now, however, it does not include the AspectDSL module in

Object. Instead, if you want this behavior for all types, you must require the

new lib/aquarium/aspects/dsl/object_dsl.rb explicitly.

As an alternative, if you just want the AspectDSL module included selectively in

certain types, then do the following:

class MyClass # reopen "MyClass"

# Add the methods as _class_ methods

include Aquarium::DSL

end

or, use (class|module)_eval:

require 'aquarium/dsl/aspect_dsl'

MyClass.class_eval do

# Add the methods as _class_ methods

include Aquarium::DSL

end

To add the methods as _instance_ methods on individual objects:

object = MyClass.new

object.extend(Aquarium::DSL)

Note: as discussed at

http://practicalruby.blogspot.com/2007/02/reopen-with-moduleeval.html,

using "class_eval" or "module_eval" is safer that just reopening a class if

you're not sure that "MyClass" has actually been defined yet. However, in our

particular case, it probably doesn't matter, as AspectDSL doesn't change

anything about the type, like aliasing existing methods. Still, we can't

guarantee that this won't change in the future.

== Version 0.1.0

This is the initial version.